Hydraulic Machine Dealers in Navi Mumbai

Specially designed to expand stainless steel thick walled and exotic harder tubes, where conventional expanders would fail. Can expand tubes in a deep chanel using stepping extension. Quality leak proof joint in 3 to 5 seconds. Precise control of advancing force. Constant RPM even under load condition ensures equal pressure to the rolls for tight fit, leak proof joint between tube and tube sheet. Internal cylindricity of expanded tubes. Durable heavy-duty construction ensures long reliable life. Reduction of tube stretching and internal stresses. Simple operation saves time and reduces operator fatigue. Large oil tank and external filter for better cooling effect and easy filter replacement. Automatic lubrication system increases tool life and reduces consumable cost. Continuous programmed cycle-microprocessor controlled.

Heavy duty motors from Germany, form the heart of these drives.Continuous cycle operation vs. Intermittent cycle operation of drives from other manufactures.

• Rated Power: 1-3kw,Other
• Warrenty: Other
• Color: Other
• Automatic Grade: Automatic,Manual
• Certification: Other
• Condition: New
• Driven Type: Hydraulic
• Weight: 100-1000kg
• Voltage: Other
• Type: Hydraulic Cutting Machine
• Cutting Machine: Nil

• Brand Name: MK
• Phase: 3 Phase Motor
• Size (Inches): 9 In. X 4 In. X 3 In., 9 in.X 6 In.X 4 In.
• Resistance Durability: Fire Resistant, Heat Resistant, Water Resistant
• Motor Power: 5 H.P.
• Frequency: 50 - 60 Hz

• No Load Speed (in rpm): 90-1300 rpm
• Item Weight (in Kgs): 2750
• Power: 4 Kw
• Voltage: 370 V
• Spindle Connection: 4 Clamps
• Straddle: 1250 mm
• Motor Power: 2.8 HP

• Material: Rubber
• Shape: Round
• Color: Black
• Sealing Type: Double Spring
• Specialities: Unbreakable, Good Quality, Fine Finish
• Type: Industrial Seals

• Type: Toggle Press
• Application: Punching, Pressing
• Weight: 20-40kg
• Condition: New
• Automatic Grade: Manual
• Driven Type: Hand Operated Toggle Press
• Country of Origin: India
• Brand Name: GTL
• Capacity: 500kg.
• Table size: 160x110mm
• Stroke: 25 mm
• Hole: 15 mm
• Throat depth: 80 mm
• Ram bore: 15 mm
• Working height: Min 60mm / Max. 140 mm
• Net Weight: 28k

For mounting the specimens with Bakelite powder Specimen is kept face down in the Cavity & bakelite Powder is Hot moulded around it with hydraulic pressure. -> Mould dia 30 mm. -> With Digital timer. -> Operates on 220 V AC

• Application: Commercial
• Material: Steel
• Type: Hydraulic Tubes
• Features: Strong construction, High strength ,Impact resistance
• Single Piece Length: 3 m to 6 m
• Size: >4 inch
• Thickness: 3 to 20 mm

• Model Number: H type hydraulic press
• Packaging Type: Normal
• Pressure: 10 METRIC TON

We make available different payment options to suit the convenience level of the clients. We entertain both online and offline payment processing methods for the convenience of our customers. We have superior storage capacity to safely store the extensive product range that we offer. Our massive and well-maintained storage space is well-connected with the shipping unit. The offered Hydraulic Tube Expansion System is used to expand tubes without flaring.

We are offering best Hose Crimping Machine supplying company.

• Capacity: 100-200kg/h
• Finishing: Polished
• Width: 70mm
• Pressure: High Pressure
• Overall Length: 55mm
• Type: C Frame Hydraulic Press
• Material: Mild Steel
• Shape: Rectangular
• Color: Light Blue
• Condition: New
• Warranty: 1 Year
• Country of Origin: India
• Operating Mode: Manual

Hydraulic press machine manufacturers, suppliers, dealers, traders, distributors, exporters as well as service provider with assurity of durability, reliability, efficiency and required less maintenance. VAG Polytech well known name in industry of provide client satisfaction and trusted services. Certified hydraulic press machine manufacturer in Mumbai, India. We are also operating as an exporter to worldwide as per the demand and suggestions.

• Capacity: 300-600 Tons.
• Maximum daylight & width: 490*740 mm.
• Maximum Operating Pressure: 210bar.

Hydraulic heavy capacity press. High strength structure and durable. Strong electric power and high tonnage capacity. Safety valve protect over stroke. Simple illumination system and visual window for exploded-proof. Opt exhaust to remove oil and smoke designed by customer.

Hydraulic press machine manufacturers, suppliers, dealers, traders, distributors, exporters as well as service provider with assurity of durability, reliability, efficiency and required less maintenance. VAG Polytech well known name in industry of provide client satisfaction and trusted services.

• Type: Jacking Equipment
• Color: Yellow
• Brand Name: Bell
• Upright Height: 500 mm
• Stay: Adjustable
• Pattern: Hydraulic Tank
• ADVANTAGES: Welding done at ground level,Easy access for inspecting quality of welding,Roof is fixed to the top shell plate from the commencement rendering it stable against WIND-LOAD throughout the erection work,Guide trestles stabilize the tank at the bottom mainta
• PRINCIPLE OF ASSEMBLY OF HYDRAULIC TANK JACKING EQUIPMENT: The foundation is made ready,The base is laid out and welded,The periphery of the tank is marked out on the base plate,Guide trestle for the shell plate are erected,The top shell plates are erected and welded vertically,The roof trusses are assembled and

• Brand Name: Parker
• Features: Aluminum Construction for better heat dissipation,50 gallon aluminum reservoir
• Mounting Style: Saddle mount
• STORAGE TANK: 50 Gallon
• FILTER STAGES: 40 Micron
• TYPICAL APPLICATION: Dump trucks / trailers - Low boys - Moving floors
• RAPID EXHAUST: Auxiliary mushroom vent

the internal drive system is the most direct and straightforward drive option. A replacement of the few lightweight components is easily possible during routine maintenance periods. A hydraulic cylinder installed on each side of the grate step, allow a linear movement of each step. Positioning and synchronisation is achieved by an integrated measuring and sensor system. High-quality components provide safe operation as well as the required reliability, even though they are working in a hostile environment inside the grate zones. None of the drive components penetrate the grate side walls; therefore the grate construction is totally enclosed.

All Electricals, Hydraulic elements, Tank accessories & Hydraulic fittings from reputed manufacturers. Are designed Robust with good aesthetics and are easy to maintain.

MANUAL TOGGLE PRESS HIGH FORCE AT THE END OF STROKEForce ranging from 5 kN to 22 kNSCHMIDT Toggle Presses are available with a round or square ram to avoid torsionFeatures-Round ram:High force at end of strokePrecise adjustment of the press depth via hardened lower stopHoned bores and ground rams provide a long service life and a precise guidance ApplicationsAssembling, riveting, staking, swaging, crimping, marking, numbering, deforming, stamping, cutting and High force over a short press stroke

We are one of the esteemed Hydraulic Press Machine Manufacturers and Suppliers from India. Our Hydraulic Press Machine is used in various industries for applications like straightening, broaching, embossing, pressing, drawing, bending, and many more. Our Hydraulic Press Machine is widely demanded by the clients due to its high grade and cost effective performance. Capacity : 10Ton to 200Ton Specifications : Moveable work head Loading become easy due to large daylight with open sides Heavy duty Press MachineRigid frame under full loadAdjustable work bed along with friction brake winchVaried choice of pumps & pressing cylindersChoose double-acting presses for speedy retractionIncludes tonnage gaugeIED & IES Series comes with pendant control Features : High performance Sturdy construction Rust proof Effective performance Heavy duty Long operational life

• Outer Diameter: upto 1200 mm
• Country of Origin: Made in India
• Brand: EXCEL HONE

• Country of Origin: Made In India
• Type: Pipe Bender
• Certification: ISO 9001:2008
• Weight: 900-1000g, 300-400kg
• Condition: New
• Features: Compact size, Dimensional accuracy, Optimum finish, Precisely designed, Easy to install, Resistant against corrosion.
• Usage/Application: For Bending Conduit Pipes
• Bending Material: Mild Steel
• Size: 25 mm
• Automation Grade: Semi-Automatic
• Dimension: 73x32x20 cm
• Bending Dies: 2 inch

• Oil Tank Capacity (Litres): 30, 45
• Hydraulic Oil: SAE VG 68
• Maximum Working Pressure ( bar): 100

Drive communicates with the pump via 9v DC remote control. This ensures safety and eliminates the need of electrical cord between pump and drive that other manufacturers provide. Silent during use. In comparison electric and pneumatic tube expansion systems are noisy. Compact, therefore easy to use inside boiler drums. Compatibility - Same powerpack for all the 4 drives to expand 58” o.d to 4” o.d tube. Very High Torque Developed - can expand large diameter, thick wall tubes in thick tube sheets easily. Long life + low maintenance. Boiler erections get completed in record time. Can be use for long working hours because drive is unaffected by heat. Dual drive powerpack is available to connect 2 drives to a single powerpack to cut down tube expansion time cycle by a further 50%. Microprocessor controls on the pump automate the expansion cycle. Trip, pause and reverse times for the drive are adjustable. No need for repeated manual STOPSTART of the drive during the expansion cycle - completely automaticall

• Material: Mild Steel
• Voltage: 440V
• Automation Grade: Automatic
• Power Source: Electric

• Capacity: 15 Tons

Self-contained Hydraulic Puller, no need for extra hand pump, hose and coupling, allows operating by one person.360° Rotary handle swivel clevis allows pumping at all directions. Safety valve minimizes the risk of the puller overload by limiting the applied force.