Industrial Control System Dealers in Ghansoli, Navi Mumbai

• Automation Grade: Semi-Automatic
• Phase: Three Phase
• Power Source: Electric
• Voltage (V): 330 - 480
• Frequency (Hz): 50 - 60
• Capacity (Amp): 100
• Coating: Painted
• Temperature (Deg. Celsius): 30 - 45
• IP Type: IP55

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

• Features: Rugged construction, Corrosion resistant, Low operational cost
• IP Rating: IP33, IP40, IP44, IP54, IP55
• Application: PLC Automation

We have segregated our infrastructural facility into several units including packaging unit wherein we meticulously pack our products to ensuring hassle free deliveries. We can carry out excellent supply chain management, as we have an ultra modern warehouse and the latest inventory control systems. Both help us meet bulk requirements and save us from stock out situations. Alternating Current Drive Control Panels have a smooth and polished surface with a lightweight body.     

• mono solar panels: poly solar panels
• multi solar panels: all solar panels

We are offering solar panels from 2 watt to 320 watt. monocrystalline type, polycrastalline type, multicristalline type. for all type of photovoltaic applications

• Weight: 1000-2000kg
• Voltage: 380V
• Automatic Grade: Automatic
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1 Year

The Electric Solar Panels that we offer are extensively used to convert the sunlight into electricity. These Solar Panels are made using high-grade components and appreciated for durability and corrosion resistance. Solar Panels that we offer are used for providing electricity to various sectors like residential, commercial, industrial, etc. Our Solar Panels are highly energy efficient and available at very affordable rates.

We are offering ac servo system. Extremely quick response time, highly precise, energy efficient, low vibration & noise, smooth running with accurate torque, customized programming, entire set

• Application: Office, Restaurant, Railway station
• Color: Black
• Driven Type: Electric
• Warranty: 2years
• Fingerprint capacity: 100000
• Reading Distance: 1 meter

• Features: High efficiency , Long functional life , Easy to use
• Item Code: A-701

Type tested to conform to leading Global Product Standards. (IEC-61439-1 & 2). Fully Compartmentalized (Form IV) Design. Drawout modules are simply pushed in for withdrawal, ensuring smooth & tool-less operation. Drawout modules plug-in directly on to Vertical Bus Bar, minimizing maintenance issues. Vertical Bus is Joint-free along the feeder area, therefore is highly reliable. Safety shroudshutter providing IP 20 levels of segregation upon withdrawal. Shock-free operation with Double Stab-in earthing in all Drawout modules. Fully Bolted Modular Structural design. Drawout Modules have interlocks for Test, Service & Isolated positions. Drawout Modules available in 3 Pole for Starter feeders & 4 Pole for Power feeders.

• Phase: Single Phase
• Power: 1100 W
• Color: White
• Material: Mosaic Mimic Panel
• Usage/Application: Industrial
• Brand Name: Tan Swa

Our Mozaic Mimic also called  Mosaic Mimic panels are in services in your region for many years.Not only in your region but also they are operational ingujrat, maharashtra, m. P. Rajasthan and various cities such as mumbai, navi mumbai, midc dombivali, kalyan, ambernath, thane, pune, mahad, ttc mumbai, roha, goa, bangalore, delhi & also export to australia, austria, bangaladesh, brazil, china congo, dubai, indonesia, iran, israel, nigeria, oman, portugal, qatar, russia, saudi arabia, sharjah, singapore, south africa, sri lanka usa, vietnam, yemen and zambia in various places in the world.For Industrial Process Application.  Additional Information: Pay Mode Terms: Other

We are successfully meeting the demands of generator control panels which have high demand among our valued clients for their capability to deliver efficient performance standards. These generator control panel are manufactured using quality materials procured from reliable vendors including switched, aluminum, copper, L angle, CR sheets, which provides in them optimum functionality standards. Further, we deliver these generator control panels in modular, compact, and rugged construction with fully compartmentalized design options. Features - Controls for diesel generators consist of following:     Auto mains failure DG panels   Auto synchronizing panel   Standard DG panel

We are well known manufacturers as we deal with electrical devices that are immensely important in the day to day industrial life. They are fabricated in such a manner that they impart all the functional properties in a definite manner.

Imported from Germany, the Solar Panels are in line with the most rigorous international standards. We have become a respected name to cater to the demands of Solar Panels.  The Solar Panels use the most efficient photovoltaic cells. Also, the Solar Panels, owing to their strategic design, can generate electricity even in partly cloudy conditions.  We are a trustworthy name to get reliable Solar Panels.

• Frequency: 50-60 Hz
• Automatic Grade: Automatic
• Capacity (Ampere): 6-100 Ampere
• IP Rating: IP55
• Phase Type: Three Phase
• Surface Finished: Polished

We are a buyer's best bet when it comes to purchasing Perforated Acoustic Panel. Our company is a promising supplier. We have an in-house facility, which is used for making stocks. Laced with modern amenities, our storehouse keeps the products away from moisture, rainwater, sunlight, etc.

Pneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control PanelPneumatic Control Panel

Control Panel for EOT cranes manufactured by Silverline Metal Engineering Pvt. Ltd. are used to facilitate crane drivers in smooth operations of cranes during various operation.

• Phase: Three Phase
• Material: Mild Steel
• Voltage: 220-440 V
• Finishing: Coated
• IP Rating: IP 44
• Frequency: 50-60 Hz

• Width: 1000mm

It can give you multiple benefits including applying it over the roof as well as under roof insulation. The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work. Apart from temperature or thermal insulation and upholding your premises or industry in better climate condition in higher temperature, low cost is another advantage why the popularity of roof insulation is increasing. One can apply as much as insulation to make it thicker and more thermal barrier as there are very little difference on the overall cost. Apart from temperature conversation and heat resistance, roof insulation material also gives helping hand to your pocket. It also saves money because every bit of loss in temperature can result into to higher energy consumption and higher expense.

With the support of our competent procurement teams, we source and export a quality range of Electrical Panels. Using advanced and modern technology, these panels are manufactured from high quality factor inputs under the supervision of our experienced team of professionals. To get maximum satisfactions of our clients, our offered panels are tested with all quality parameters of the international standards. These panels are highly useful to avoid short circuit or overload. Apart from this, our offered panels are widely appreciated for their excellent features like durability, sturdy construction and reliability. With the help of our professionals, Dewdry Industries is capable in offering an exclusive array of Dehumidifier Control Panel. Offered panels are designed & developed by the experts in complete compliance with the international quality standards. Apart from this, these panels are strongly constructed to prevent damages and all useless electrical defaults. Available with us in various designs, these panels are highly known for their durability and sturdy construction. We offer these panels at effective rates. Features: Excellent performance Durable Low power consumption

  programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

• Features: Excellent quality, Robust, Easy installation, Highly efficient

We manufacture & design all types of the HMI Control Panelsas per the design or customer requiremnts

We are manufacturer and supplier of PCC Panel. We offer PCC panels which are used for diverse industrial applications and provide reliable and effective service. With best usage and productivity, these offer high controllability and also available at market leading prices.We offer superior quality PCC Panel to control power production and distribution.     Features :-  Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply . They will be installed indoors and will work efficiently up to an ambient temperature of 50°C. All doors will be suitably labeled and marked for convenience of operation & maintenance.  Construction :- Type: Single /double sided.Modular design, free standing and will have fixed or draw out type executions as many be desired. Finish:The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. Bus Bars: Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal Wiring:Wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus:Bus Bars will be running all along the board. Switch Gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Standards:Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375    

It is Metal clad type & having type tested design suitable for PLC/SCADA/DCS system & remote operations along with fault annunciation for motor control & power control panel.

Backed by our sophisticated infrastructural facility, we are manufacturing and supplying Thyristorised APFC Panel. These are designed by our skilled tea of professionals by utilizing the supreme quality components and latest technology in adherence with the international standards. Our offered range is cherished by the clients all across the country. Available in various specifications, the offered panel can also be availed by the clients at market leading prices.