Industrial Dryers Dealers in Mahape, Navi Mumbai

Ribbon blender/powder mixer mixes in 5minot 50100/25/500/1200kf ready  

  RVD's have a wide range of application in pharmaceutical, dyes/dye intermediates, inorganic chemicals, agrochemicals, organic chemicals, and other allied industries.   We manufacture agitated RVD with or without internally heated shaft, depending upon the heat transfer requirements. We manufacture RVD's with external heating both through jacket/limpet coils. The scrapper plates provided scraps almost 100% of the inner surface of the shell to ensure efficient separation. The discharge valve and charging doors may be both manual and pneumatic/hydraulic type. They are provided with either mechanical steels of stuffing box depending upon the applications.

• Material: Stainless Steel
• Voltage: 210-480 V
• Automation Grade: Automatic
• Temperature: 5 deg. C above ambient to 350 deg. C
• Frequency: 50-60 Hz

• Brand Name: Promas's rcvd, rota cone dryer
• After-sales Service Provided: we are always there to help our beloved customers

Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator.

• Vacuum Tray Dryer: Standard models range from 3 trays to 96 trays

Application: Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe. Working Principle Vacuum Tray Dryers Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product. Our Specialities Creating innovative and cost effective designs as per your requirement to give you maximum and best output from our equipment Providing Lab Models in exactly the same material to give the accurate results Design and supply of entire turnkey projects at any scale, from 500 kgs to 20,000 kgs capacities. The dimensioning of the vacuum system is an important factor in the design of drying cabinet systems .If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out directly to a surface condenser in which the vapours condenses. Non-condensable vapours are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates. Vacuum tray dryers with watering vacuum pump & high vacuum Rotary oil ring Pump can be providing Promas Edge Over the other Manufacturers of vacuum tray dryers. One touch door Opening & Closing system. No door Sagging Machine Welded heating shelves for maximum heat transfer and no contours or deformation Channel Type Heating shelves for faster heat transfer rates Online receiver Drain-ability under vacuum Larger Diameter Vacuum suction pipe for minimal choking and maximum vapour suction Single Piece gasket for Door ensuring no leakage Completely Welded body World class aesthetics

• Brand Name: Ankita Technologies (I) Pvt. Ltd.
• Automatic Grade: Automatic
• Minimum Order Quantity: 1 Unit

Standard models range from 3 trays to 96 trays Application: Used for drying of high grade temperature and oxygen sensitive products. Highly suitable for drying hygroscopic substances which are dried to very low residual moisture content levels. Frequently vacuum drying cabinets are the sole possibility for drying lumpy, glutinous products or products of low pomposity. We are manufacturer, supplier and exporter of vacuum tray dryer as per ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the globe. Working Principle Vacuum Tray Dryers Vacuum tray dryer is the most commonly used batch dryer. They are either box – shaped or cylindrical shaped loaded and unloaded via a door. Inside are several heating plates mounted one above the other on which the product is placed in trays .The Top of both heating plates (Shelves) and the bottom of heating shelves trays should be as smooth as possible to permit optimal heat transfer between plates and product. The medium flowing through the heating plates is water, steam, or thermal oil. The distance between the heating plates is determined primarily by the surface loading and the foaming of the product. To avoid retrograde condensation, the cabinet walls are indirectly preheated by limpet coil provided on the outer side of the body (Optional). Only after all the product trays reach the same temperature, the cabinet is evacuated and drying can start. (The preheating phase is very important in order that the drying curve and the foaming of product are identical throughout the cabinet). During the main drying phase the vacuum is in the range of 40 to 80 mbar abs and in the final drying phase vacuum of only few mbar abs are reached. The vacuum can be controlled through PLC in order to reduce the drying cycle. Nitrogen can also be purged in the VTD according to the product.The dimensioning of the vacuum system is an important factor in the design of drying cabinet systems .If for example vigorous foaming of the product is desired, evacuation to the operational vacuum level must take place very quickly. Vapors produced during drying are taken out directly to a surface condenser in which the vapours condenses. Non-condensable vapours are extracted by the vacuum system. On completion of the drying, the product can be cooled by circulating of cooling water through the heating plates. Vacuum tray dryers with watering vacuum pump & high vacuum Rotary oil ring Pump can be providing Promas Edge Over the other Manufacturers of vacuum tray dryers. One touch door Opening & Closing system. No door Sagging Machine Welded heating shelves for maximum heat transfer and no contours or deformation Channel Type Heating shelves for faster heat transfer rates Online receiver Drain-ability under vacuum Larger Diameter Vacuum suction pipe for minimal choking and maximum vapour suction Single Piece gasket for Door ensuring no leakage Completely Welded body World class aesthetics

• Brand Name: PROMAS

we are offering rotary double cone vacuum dryer. applications rcvd is suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. the equipment can also be used as rotary evaporator

Capacity: 5 Litres to 5000 Litres chamber volume M. O. C: SS 316, SS 304, Carbon Steel We are manufacturer, supplier and exporter of agitated vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Application: To dry heat sensitive and air sensitive material under vacuum thus accomplishing the drying at moderate temperature avoiding contact with air. Working Principle Agitated Vacuum Dryers The entire drying chamber is well machined to bring about a close encounter with the agitator blade thus ensuring proper shuffling of the material and thus avoiding localised over heating. The leak proof front opening door ensures easy cleaning of the entire chamber.The top loading and bottom unloading facility provides for easy charging and discharging of the material. The cyclonic trap prevents the fine dust of the dry material from flying into the vapour condenser. The condenser and the condensate collection tank prevent the vapours from entering the vacuum pump. Appropriate vacuum pump and accessories are provided with the unit with valves to adjust the right vacuum in the unit. The entire unit is mounted on a steel frame. They are used with particular success in agglomeration free rapid drying, heterogeneous reactions with systems of different substances, sterilization and in general for vacuum application. Heating arrangement can also be provided along with the unit. Choice of product contact materials: AISI 304L, AISI 316L, Hastelloy optional HALAR/PTFE Coating available. Volume of the wet material loaded into the dryer is restricted to 40-45 % of gross volume. Salient Features Fast dry product discharge :- Dried material is discharged quickly by pushing action of the blade towards the discharge valve Large size front door allows full accessibility for easy and thorough inner cleaning Full door opening & Dismantable blade, not in hollow blade d,esign helps for Cleaning / Validation Standard manufacturing high geometric accuracy of the body surface ensuring efficient removal of the product from the heated walls Full process automation possible by means of PLC & DCS (* Optional) Internal heating is through a hollow shalf. The blades are provided with scrappers with minimum clearance versus heated wall which increases the rate of heat transfer. It is possible to install the dryer through a partition wall separating its loading unloading connections from its drive assembly, vacuum system water heating system etc. High speed chopper contributes to the drying process  

• Material Grade: SS304 - SS316
• Brand Name: Prerana Indtech
• Number Of Tray: 24
• Material: Stainless Steel
• Design Type: Customized

We Offer Rf Dryer. Features of RF Drying : •Uniform heating resulting in level drying and controlled moisture content within ±1%. •Environment friendly. Clean and safe. No effluents and No flues. •Easy to feed, operate and maintain. •No need of steam or hot air. Self contained unit. •Superb consistent quality of dryed material for feel and appearance. No chance of contamination, physical damage or colour migration. •Instant drying process. No startup and shutdown cost. Application : The RF dryer is widely used in Textile industry all over the world for drying the materials after bleaching, dyeing, mercerizing or wet processing after the initial hydro extraction process in a centrifuge to remove excess water. Any textile material in the form of fibres, Cheeses, cones, hanks, tows & tops and fabrics can be dried in a RF dryer and over the years this technology has increasingly become an accepted and preferred method for drying.

Industrial Dryers, Industrial Furnaces, ROBOTIC HIGH TEMPERATURE FURNACE

SPECIFICATIONS MODEL-MAJOR MODEL-MASTER MODEL-BEAR CODE NO. 953201 953101 953102 Capacity of Machine 13rd full of articles Approx. 3.4 Ltr Approx. 13.5 Ltr Approx. 16.5 Ltr. Basket: Inside dia 305 mm 445 mm 445 mm Inside depth 203 mm 280 mm 355 mm Floor Space occupied 865 x 785 mm 1170 x 815 mm 1170 x 815 mm Overall height 685 mm 940 mm 1015 mm HP required 1 HP 1 HP 1 HP Maximum Heating capacity 2.4 KW 2.4 KW 2.4 KW Time of drying 2-3 min. 2-3 min. 2-3 min. Weight approx. 180 Kg. 270 Kg. 275 Kg.

Rotary Cone Vacuum Dryers, 812 inches Air Jet Mill, Colloid Mill

Tray Dryer, pharmaceutical products, Fluid Bed Dryer, Reaction Vessel