Industrial Pump Dealers in Mahape, Navi Mumbai

• Feature: The motor is fuel cooled • The electronics are located in a dry cavity
• Rated Flow (lpm): Up to 10 gpm
• Voltage (VDC): 28 VDC
• Weight (lbs): Up to 10 lbs

Our APU fuel feed pumps uses 28 V direct current (DC) to drive a high-efficiency DC motor. For brushless DC motor driven pumps, the integral electronic controller uses Hall Effect sensor rotor-position feedback. The electronic controller does not use any software or programmable logic devices. For cartridgecanister style pumps, the canister is installed on the wet side of the tank with the pump cartridge installed into the canister from the dry side. This allows the element that contains the motor and bearings to be replaced without draining the fuel tank.

We are engaged in offering high quality Hydraulic Filter, which are used to eliminate the impurities and other contaminants from the hydraulic fluid. These contaminants can decrease the life of system components through abrasive wear. The hydraulic filters are essentially known for offering good protection against contamination and improve the reliability of the hydraulic system and components. We manufacture wide range of Hydraulic filters including Hydraulic oil filter at reasonable price rates. Hydraulic oil filter provide high pressure stability, long service life, high performance etc. It maintains the operating liquid by removing contaminants from the fluid. Hydraulic Filters have the following features: Resistant to high temperature High performance Use of quality filtration media Resistant to corrosion and humidity We also provide customized solutions to our clients at competitive prices. Our Hydraulic Filter is perfect to remove the impurities to the hydraulic fluid that can degrade the life of the automotives. By removing all the contaminants from the fluid, our High Pressure Hydraulic Filters enhance the servicing life and reduce the maintenance cost of the components. Today, we are well reckoned as one of the key Hydraulic Lubrication FilterSuppliers in India.

• Motor Horsepower: 5 HP
• Phase: 3 Phase
• Frequency: 50-60 Hz
• Voltage: 210-480 V
• Maximum Working Pressure: 200 bar
• Discharge: 50-100 LPH

• Weight: 0.63 - 0.71 oz (18-20 grams)
• Operating Temperature (F): 41 - 158° F
• Operating Temperature (C): 5-70° C
• Operating Environment: 0% - 95% Relative Humidity
• Body Material: Noryl GTX830
• Material: Silicone/ Brass

This hand pump is specialy designed for bolt tensioner applications. The pump is compact and light in weight with longer handle needing very little effort to generate max working load. All pumps are supplied with suitable fittings and stainless steel 4” dia pressure gauge.

• Driven Type: Electric
• Color: Blue
• Condition: New
• Automatic Grade: Semi Automatic
• Power: 1-3kw
• Application: Washing Car
• Voltage: 220V
• Type: Car Washing Pump
• Weight: 7 kg
• Warranty: 1year
• Country of Origin: India

• Type: Vertical Turbine Pump
• Shape: Vertical
• Application: Constructional Use
• Voltage: 110V, 220V, 380V
• Fuel: Battery, Diesel, Electric
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Warranty: 1 Year, 2 Years

These pumps are nonself-priming vertical multistage centrifugal pumps the pump consist of base and pump head. The chamber stack and the outer sleeve are secured between the pump head and the base by means of tie bolts.The base has suction and discharge connections on the same level (in-line).

Tablet Dissolution Test Apparatus (6+2) The new LABINDIA Dissolution Apparatus DS 8000 provide great versatility and configurability. It fulfils all requirements relating to ASTM & FDA Mechanical Calibration. The state-of-the-art Dissolution Testing with touch screen is elegant in design and user friendly with advanced features. The DS 8000 is precision engineered for USP dissolution for ease of use. Allows storage of up to 200 product test run parameters. Diagnostic functionality and validation report of the system is reliable enough for QC applications and flexible for R&D use. FEATURES: Advanced, Micro-Controller based: User-friendly, complies with current USP, IP & BP specifications Moulded water bath with 6+2 (3+1 & 3+1) vessel configuration enables comparative studies Mono shaft design with easy changeover between Apparatus I & II eliminates routine height validation as per USP Paddles, Baskets and Vessels are laser marked with serial numbers for traceability Automated Tablet dispenser - drops 6 dosage form at single instance Low Evaporation Lids:   » The conical shape low evaporation recovery lids reduces media loss during long run » Integrated pre-centered lids; no manual removal or positioning of lids. This ensures automatic vessel centering and precise positioning of paddle/basket with shaft without any special tool as per pharmacopeia requirements.  

Aerosol Disinfector Fumigator. Instantly converts liquid formalin into true aerosol particles with evaporation @2~2.5 Ltrs. / Hour. Works on 230 V, 50 Hz, Single Phase AC Supply. Electric Consumption 100 W. Light weight, portable and easy to operate. Virtually no maintenance required. Made of stainless steel. Approx. 5 Ltrs. Tank capacity, mounted on three wheel castors. For Optimum result use formlin @10~12 ml / Ltr. Net Weight Approx. : 8.50 Kg.

• Type: Vacuum Pump
• Number Of Stages: Single stage
• Capacity: 20 CFM- 150 CFM
• Available Power: 1.5- 10 HP
• FEATURES: 4 pole IP54 TEFV motor. Standard voltages (3pH) 400-3-50. Star Delta starting from 7.5 kW. Factory-fill of lubricant. Durable cast iron pump provides 15,000+ hours of trouble free service.

• Flow Rate (GPM): 6 @ 18psi
• Maximum Pressure (psig): 42.6
• Voltage: 115 VAC single phase

This pump uses single-phase 115V AC at frequencies from 360-800Hz to drive a high-efficiency, brushless DC motor. The pump is mounted in line and uses standard flexible coupling style hydraulic connections. The pump is mounted via four mounting holes in the feet. A standard military-style connector is used for the electrical connection.

• Features: Long working life,Superior functionality,Precisely engineered,High operational fluency,Sturdy design

We are the leading exporter and supplier of this products.

• Power Source: Hydraulic
• Motor Horsepower: 1-10
• Maximum Discharge Flow: 1-200
• Discharge Pressure: 1-100

We are offering gear box lubricating pumps. Gear box lubricating pumps are widely used in plants manufacturing fertilizers, cement, food products, plastics, soap as also in refineries, shipping & textile industries , in pharmaceutical plant, blending processes, oems etc.

• Maximum Discharge Flow: 501-1000 LPM
• Maximum Head: > 500 m
• Motor Horsepower: 5 to 20 HP
• Motor Phase: Three Phase

Liquid ring vacuum pumps and compressors are rotary machines. They operate according to the positive displacement principle. In these machines, a liquid is made to act as a piston. The liquid is generally water for most of the applications and hence they are also known as water ring water piston or liquid piston rotary pumps and compressors. Information about construction, working, operation and maintenance of liquid ring vacuum pumps is given in this article.

• Material: Mild Steel
• Surface Finish: Polished
• Pack Type: Box
• Weight: Up To 50 kg
• Product Type: Hydraulic Pump Cylinder

• Application: Industrial
• Country of Origin: Made in India
• Packaging Type: Box
• Head sixe: 6 m
• Capacity: 140 LPH
• Power Rating: 0.75 kW

• Specialities: Low maintenance, Corrosion resistance, Accurate dimension, Long life, User friendly, Fine finish .
• Frequency: 50Hz
• Power Source: Electric
• Maximum Head (in meters): 36m

• Country of Origin: Made in India
• Usage/Application: Industrial
• Power Source: Hydraulic
• Max Flow Rate: 700 bar
• Brand: Enerpac
• Motor Speed: 1000 RPM

Water Pumps. We are the best Water Pumps Dealer In India, our company is specialize in water pump dealer, and supplier, our expertiser are very experence and effective worker, Water pump Dealer in india. Body: Aluminum extruded motor body- extremely compact and light weight, Water Pump Dealer, It is committed to achieving complete customers satisfaction with excellent in services quality and supports. Impeller: Forged Brass impeller, ensuring longer life. Motor Shaft: High Quality alloy steel. our offered pump in india is suitable for various manufacturing industries also. service in india centers thanks to the growth strategies being adopted by the company. Motor:Water Pump Dealer In India are coupled to high efficient V-Guard induction motors. The motors are Totally Enclosed Fan Cooled (TEFC}, Capacitor Start & run type. Direction of Rotation: clockwise, when viewed from motor side, standard centrifugal and reciprocating pump equipment and highly engineered pump systems, Water Pump Dealer In India. water pump used for industrial and domestic purposes. These products are extensively used in the areas where is wide range of voltage fluctuations,this is raw materials to the finished product to keep all the products in a systematic way. We are quality based firm constantly associated with giving best matchless quality tried items to our clients. we have achieved a different position in the business.

• Color: Yellow
• Pump Type: Centrifugal Pump
• Brand Name: Bell
• Power Source: AC Powered
• Motor Speed: 1000 RPM
• Discharge: 50-70 LPH