Back Back
IVEX Series Butterfly Valve
Get Price Quote
1 Piece (MOQ)
The ultimate in high performance Butterfly valves, IV’s IVEX – series incorporates the ‘state of the art’ valve technology to out perform the competition. The double offset disc design nearly eliminates the seating wear due to the cam action of the disc during closing. The mechanical stopper provided on the valve body ensures precise valve closing every time to ensure specified seat tightness. The disc has a spherical profile and comes out of contact with seat in the initial opening itself. The valve is available with 3 distinctly different seat design versions, viz. Soft seated, Fire safe and Metal to Metal seated with wafer or wafer lugged body option. The valve has excellent throttling characteristics with good low flow control capability, which offers an inherently higher range ability. This feature of IVEX series makes them ideal for the flow control / modulating duties. An adjustable gland box type shaft sealing arrangement permits on line adjustment of the packing to ensure zero leakage. The fire safe version, IVEX – F model has been fire tested and certified as per the requirements API 607 standard by Lloyd’s Register of Shipping & API 607 Edition. V by Bureau Veritas and TUV. Key Features: Double offset disc design with a spherical profile seat eliminates seat wear and ensures perfect sealing every time. Availability of wafer lugged body with through drilled or threaded holes. Available in 3 distinctly different seat version viz. PTFE seat, Fire Safe seat and Metal to Metal seated. Self- lubricated drive end and non-drive end bearings for IVEX–T and IVEX-F models and galling free metal bearing for IVEX-M versions. Stuffing box type gland sealing to enable field adjustment of shaft sealing. Gland packing standardised on graphoil rings (non-asbestos) to offer widest operating temperature range coupled with excellent media resistance. Metal seat standardised on Inconel 625 material to offer maximum temperature resistance and minimum seat deformation. Option of seat material for soft seated version in virgin PTFE or filled PTFE. Seat removal without disconnecting of shaft and disc. Split ring type thrust pad provided for the drive end shaft prevents axial movement of the disc as well as ensures the required ‘anti-static’ feature for the valve. IVEX-F model fire tested in presence of third party agencies as per latest version of API 607 standard. Special material of construction available optionally for specific services.
JORC MAKE EZ-1 Electronic Timer Drain
7,000 - 19,000 Per unit
1 Piece (MOQ)
Best Deals from Industrial Valves
Mercury Type Solenoid Valve
Get Price Quote
Gate Valve
Get Price Quote
1 Piece (MOQ)
In order to meet the diverse requirements of the clients, we are providing a wide array of Cast Steel Gate Valves. The valves we are offering are widely appreciated by our valuable clients for their durable finish and other salient features. Manufactured by our professionals by making use of high quality basic material and cutting-edge technology, these are designed at our well-equipped production unit. Specifications : ANSI Class Size Range 150 2" to 24" 300 2" to 16" 600 2" to 12" Bolted bonnet outside screw & yoke Rising stem Wedge disc Flanged raised face ANSI B16.5 Face-to-Face Dimensions ANSI B16.10 Alternative valve ends Butt weld ends to ANSI B16.25
Globe Valves
Get Price Quote
Spire Industrial Equipments Co. globe valves are heavy duty, outside screw & yoke type, bolted bonnet, rising stem and hand wheel. Valves are highly efficient for services requiring frequent operation and throttling. The internal passage within the valve diverts flow through 90° changes of direction resulting in pressure drop and turbulence. The most advanced design features provides the ultimate in dependable, economic flow control. They are available in wide range of sizes and weights. Globe valves are generally considered where moderate control or regulation of flow is required. Body : Body is cast with integral flanges meeting operating conditions with reinforcement to reduce stress. Flanged end and Butt weld end are available with ASME specifications. Bonnet : Bonnet is as cast with integral yoke for better alignment and fewer parts. All bonnets are precision machines with exacting tolerance as the body for exact alignment of the stem and disc center. Seat Ring : Renewable seat is hard faced and machined to minimize wear. The seat ring is seal welded to the body. Integral Seat is provided for Austenitic Stainless steel valves. High Quality deposits of Stellite 6 & other hard facing alloys are assured by use of controlled preheating and automatic plasma arc facing and controlled cooling process. Disc : Disc is Ground and lapped to mirror finish. Differential hardness difference of 50 BHN is maintained between disc and seat. Stem : Rotating stem with precision ACME threads are machined and burnished to mirror finish to 0.8 microns for low torque. Stem has long engagement with stem nut for accurate sealing. Disc Nut : Disc nut secures stem to the disc. It permits the disc to rotate about the stem axis and aid in tight sealing for trouble free service compensating for disc wear. Thrust Washer : Hard Thrust washer prevents galling. Stem Nut : Precision machined stem nut engage the stem for accurate control of Disc position. Gland : Two piece gland for ease of alignment and exerts even pressure on the packing without binding the stem. Gland Flange Body Stud Nut Packing : Die Molded Grafoil rings with top and bottom braided rings provides ultimate sealing for wide range of service. Assures long packing life and avoids pitting on stem. Back Seat bush : Precision Machined bush helps for replacement of packing at open position. Gasket : Spiral wound metallic gasket with Grafoil enclosed in tongue and groove arrangement. Eye Bolt & nut : Swing type eye bolt for ease in replacement of packing. Solid Groove pin Hand Wheel : Hand wheel are standard up to 10". Gear operator can also be given on request. Hand Wheel Nut Globe Valves are adequate for all service media. Valves are marked with flow direction since they are recommended to install with flow and pressure under the disc. It can also be installed in reverse condition depending upon the conditions. The Globe Valve is generally faster to operate due to less travel. But requires much force to operate compared to Gate Valves.
UPVC Single Union Long Handle Ball Valve
60 - 70 Per Piece
100 Piece (MOQ)
Details : Cost-Effective & easy to install Smooth handle movement No leakage at rated pressure Resistant to chemicals, corrosion & abrasion Socket ends joined with Solvent Cement
Check Valve
Get Price Quote
Industrial Valves
Get Price Quote
We are the main supplier of this product.
Manually Foot Operated Valve
Get Price Quote
5 Piece (MOQ)
Inverted Pressure Balanced Lubricated Plug Valve
Get Price Quote
Cast Carbon Steel Strainer Valve
Get Price Quote
100 Piece (MOQ)
5 Way T Type Manifold Valve
2,800 Per Piece
10 Piece(s) (MOQ)
We are engaged in offering Industrial Valves including 5 Way T Type Manifold Valve from Thane, India..
Air Lock Valve
15,000 - 75,000 Per Piece
1 no (MOQ)
Our airlock valve is manufactured using the best quality raw materials i.e. steel, stainless steel and brass. Our rotary airlock valve is resistant to corrosion, abrasion, extreme temperature conditions and rust. Owing to this, the products have gained immense repute in the market. For the same reason, we are reckoned to be one of the major air lock valve manufacturers and suppliers based in India.
five valve manifold
Get Price Quote
Five valve mainfold g5 vmpp-1 incorporate two process isolation valves, one equalizer valve and two drainvent valves with separate connections in a compact manifold block. The model g5 vmpp-1 is dsigned for remote mounting away from the differential pressure instrument and joined by tube or pipe impulse lines. They have threaded connections of which the most popular are detailed below but also available to suit other sizes and standards.
Industrial PVC valves
8,000 Per Piece
Knife Gate Valve
Get Price Quote
We are actively engaged in offering Knife Gate Valve from Navi Mumbai, Maharashtra (India). Our offered valves are professionally manufactured by using the primary raw material and machinery, at our own facility. These Knife Gate Valves are used for handling semi-solid, dry ash, pulp, fiber content, and chemical. These valves are highly appreciated in the market for being light in weight and highly efficient. Our clients can avail these valves from us at reasonable prices.Details : The high pressure range valves are with special features like water sealed gland for vacuum service, Bypass arrangements for pressure balancing, Special cleaning for oxygen service, Multi start spindle for low effort operation, Extended spindle , NACE for sour service in petroleum industries, etc.
Ingersoll Rand Drain Valve
8,000 Per Unit
Gate Valves
Get Price Quote
Uniglob - a leading internationally acclaimed manufacturers, exporters, suppliers of industrial valves , we manufacture and supply our gate valve , asme class 150 - 2500 50mm - 1600mm (2” - 64”) api 600 • bs 1873 • bs 1868 asme b16.34.
Water Treatment Valve
6,000 Per Piece
Fire Hydrant Valve
Get Price Quote
The offered assortment of quality products is a result of complete quality inspections done at varied stages of sourcing raw material, which plays a vital role in delivering the finest products. Our company offers convenient payment choices. We are well versed with diverse payment methods. Whether online or offline, patrons can make payments as per their convenience.
Steam Traps
Get Price Quote
Knife Edge Gate Valve
3,500 Per Number
1 Piece (MOQ)
Wedge Gate Valve
Get Price Quote
Wedge gate valve Wedge guiding minimizes seat rubbing and scuffing resulting in long cycle life.Hardfaced seating faces resist erosion.Optional live-loading of packing and leakoff.
Needle Valve
3,000 Per Piece
Globe Valve
Get Price Quote
Cryogenic Manual Gate Valve
Get Price Quote
Auto Drain Valves
Get Price Quote
y & T strainers
Get Price Quote
Buyers across the nation can contact us for getting y & t strainers in retail or wholesale at competitive prices. In order to ensure efficient handling of the payment procedure, we have developed our own model that helps us a lot in making safe and secure transactions.
SS - MS Needle Valves
540 Per Piece
SS304 - 1/2" npt mf SS316 - 1/2" npt mf MS - 1/2" npt mf *Other sizes also available *price is indicative and may vary based on specifications.
Filter by Localities
