Instrumentation Equipment Dealers in Airoli, Navi Mumbai

To measure various climate and processes values with a hand-held, user-friendly instrument requires extraordinary measurement technology. The hand-held meters of the omniport 20 series meet these multiple demands. The selection of the appropriate sensing probe and accordingly the configuration of the hand-held meter allow for displaying the following values with the highest accuracy click here for more information

• Type: K Type Thermocouple
• Material: Stainless Steel
• Diameter: 10-20mm, 3-10mm
• Application: Industrial
• Temperature Range: 0-1200 Deg C
• Mounting: Customised, Flanged, Threaded
• Finishing Type: Polished
• Type: K Type
• Temperature Range: 0 to 600 Deegree C
• Material: SS
• Usage: Industrial
• Accuracy: 0.6°C Or 0.1%
• Power Source:: Electric
• External Shielding: Metal Shield

• mono solar panels: poly solar panels
• multi solar panels: all solar panels

We are offering solar panels from 2 watt to 320 watt. monocrystalline type, polycrastalline type, multicristalline type. for all type of photovoltaic applications

Crane control panel In our extensive range of products we are presenting our clients a complete range of crane control panels. these are widely applicable in linearly accelerated starting.

A1000 AC DRIVE Technical Specifications: Product Range: 0.55 to 355 kW. Output Frequency range: 0.01 to 400 Hz. Input Voltage: 380-480 VAC, -15 % to + 10 % Starting Torque: Upto 200 % for 60 Secs Control Method: V/f Control, V/f Control with PG, Open Loop Vector Control,Closed Loop Vector Control with PG, Vector Control for PM, Advanced Open Loop Vector Control for PM, Closed Loop Vector Control for PM. Special Features: Braking Transistor Built In till 30 K.W. Working Ambient Temperature: -10 to 50 deg C. without derating. Last Ten Fault History for easy Troubleshooting. Instant Setup of New drives using stored Backup. Swing PWM function to decrease noise at low carrier frequencies. USB Connectivity & Modbus RS485/422 onboard

• Frequency: 50-60 Hz
• Automatic Grade: Automatic
• Capacity (Ampere): 6-100 Ampere
• IP Rating: IP55
• Phase Type: Three Phase
• Surface Finished: Polished

Different types of pressure transducers transmitters are easily available under single window, named as Haris Sensor Technologies Pvt. Ltd. In addition to this, we are specialized in the supplying of all sorts of digital pressure transducers which all are widely admired for their reliability. We, an active member of CII & IMC, are one of the prominent pressure transmitters suppliers, located in India. We have a team of target oriented professionals having abundant experience in the supplying of cutting-edge technology based pressure transducers transmitters and digital pressure transducers. We export pressure transducers transmitters at the most reasonable price.

These Electric Servo Drives are the industry's smallest-class AC Drives achieved through significant panel size reduction. The Electric Servo Drives are made using the ideal AC Drives meant for power sources and motors. We are trader of Electric Servo Drives coming from several brands such as Fuji, Adtech, TDE Macno, Yaskawa, Schneider, Delta, AB and ABB. We have become a respected name to get high-class Electric Servo Drives. Known For : Low noise produced Hassle-free working Easy to install User-friendly

• Country of Origin: Made in India
• Usage/Application: Temperature Measurement
• Material: Stainless Steel
• Temperature Range: -50 to 250 Degree C
• Power Supply: 24 VDC
• Humidity Accuracy: 1.8%
• Connection Head: Flame proof and non flameproof
• Material Grade: SS 316

The Power Command Control is a microprocessor based generator set monitoring, metering, protection and control system. It offers advanced levels of functions for reliability and optimum genset performance.The power command control with digital paralleling control devices such as synchronizers and load sharing controls, and KVAR / Power factor controls.         Vesta Engineering is a Mumbai based company. Presently engaged in design, manufacturing & supply and installation of power panels, control panel, feeder pillars etc.         Manufacturers & suppliers of electrical Control Panels that include PLC Panel, AC Drive Panel, DC Drive Panel, LT Panel, PCC/MCC Panel, APFC Panel, AMF Panel, Generator Control Panel.       We manufacture and supply our high-quality products to cater to our client's requirements.     Our panel boards are made under strict supervision by qualified personnel. Very strict quality control is exercised on the production lines while the components and other raw materials used are of the best quality available   Its Types     1. A.M.F Control Panel 6. PCC Control panel Control (PCC)     2. Synchronizing Panel 7. ACB Panel     3. D.G. Set STD Control Panel 8. APFC Panel     4. Power Dist. Board (PDB) 9. MCC Panel     5. Change Over Panel Boards 10. RELAY Panel

We represent Metreel company of UK in India. We are stocking enclosed festoon cable system components and flatform cables procured from Metreel - UK. The Compact Enclosed Festoon Cable System comprise of GI track of 6 meters in length, splice joints for track, ceiling support brackets, steel polyamide cable trolleys, end clamp, and toeing trolley.

• Application: Server
• Usage: Industrial Laboratory
• Voltage: 415 V - 3 HP/50HZ
• Power Supply: 5V/1.5A,12V/250mA
• Model No: KCL-04

We are offering access cards & access control system. Advision experience in designing and manufacturing superior access control systems and solutions, providing the very latest innovation with an unrivalled product range

• Automation Grade: Semi-Automatic
• Material: steel
• Power Source: Electric
• Voltage (V): 220
• Power (Kw): 5
• Frequency (Hz): 50
• IP Type: IP45
• Surface Treatment: Polished

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

Output frequency 0.5-240 OHz Analog Setting(DCO-10V) and (DC4-20mA) Automatic Voltage compensation and slim compensation PWM frequency 1.5- 16KHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz

Our team professionals and experts ensure that the transactions done are exactly as per the guidelines. We maintain stern records of all the transactions done to gain complete satisfaction of our clients. Our organization is a famed one that is located in Navi Mumbai(India) and has a well-developed network for reaching different Navi Mumbai(India)s.

• Large Memory: 128KByte Data Memory
• Connectivity: EtherNet
• EtherNet Port: 10/100Mbps
• Security: Powerful Password Protection
• Compatibility: Win XP/Vista/7(32/64bit)
• Performance: Optimum

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

Applicable to all industries ethernet audio output extended temperature internal flash memory support micro sd slot supports functional keys & usb port custom aluminum front frame design.

• Condition: New
• Power Source: Electric
• Application: Battery Clamps
• Feature: Durable
• Type: Jump Starter
• Country of Origin: India

WE ARE DEAL WITH  CAR MECHANICAL WORK, CAR DENTING WORK, CAR ELECTRICAL WORK, CAR PAINTING WORK,7506051356

Access control provides security by giving flexible control over who is allowed to enter your premise and when. Our Access Control System recognizes, authenticates and authorizes entry to the premise thereby ensuring ultimate protection for your premise, staff and assets.

Type tested to conform to leading Global Product Standards. (IEC-61439-1 & 2). Fully Compartmentalized (Form IV) Design. Drawout modules are simply pushed in for withdrawal, ensuring smooth & tool-less operation. Drawout modules plug-in directly on to Vertical Bus Bar, minimizing maintenance issues. Vertical Bus is Joint-free along the feeder area, therefore is highly reliable. Safety shroudshutter providing IP 20 levels of segregation upon withdrawal. Shock-free operation with Double Stab-in earthing in all Drawout modules. Fully Bolted Modular Structural design. Drawout Modules have interlocks for Test, Service & Isolated positions. Drawout Modules available in 3 Pole for Starter feeders & 4 Pole for Power feeders.

• Color: White
• Usage/Application: Industrial
• Brand Name: Tan Swa
• Material: Refineries Instrumentation Panels
• Frequency Range: 50 Hz
• Voltage: 220 V

Instrumentation Panels for Refineries  are generally controlled from single point for end to end processes used in various systems and downstream production lines of refineries. These refinery instrumentation panels are used in lubricants, low temperature distillates and coal tar. Various kinds of signals (feedbacks) from the entire plant are transferred and communicated to this refinery instrumentation panels which are displayed on the control panel, with the help of annunciators or mimic or p. C. Monitors and operator gets a glance of entire process. As a manufacturer we have supplied our products to various industries located in various states including gujrat, maharashtra, m. P. Rajasthan and various cities such as mumbai, navi mumbai, midc dombivali, kalyan, ambernath, thane, pune, mahad, ttc mumbai, roha, goa, bangalore, delhi & also export to australia, austria, bangaladesh, brazil, china congo, dubai, indonesia, iran, israel, nigeria, oman, portugal, qatar, russia, saudi arabia, sharjah, singapore, south africa, sri lanka usa, vietnam, yemen and zambia. We are an approved vendor of uhde india

• Probe Diameter: 1/4" (6.3 mm)
• Cable Length: 8
• Probe Material: 304SS
• Operating Temperature: -32 to 240°F (-35.5 to 115.5°C)

The Series I2-4 Weatherproof Immersion Temperature Sensor is ideal for monitoring hot and chilled water lines feeding Air Handlers and Cooling Towers. The plastic housing has a 14 turn twist off cover to reduce installation time. The multiple knockouts allow for easy conduit access to any side of the housing. The Series I2-4 can be ordered with a choice of 11 output options that allow it to communicate to any standard building control system.

DSL SYSTEM ALSO KNOWN AS DOWN SHOP LEAD SYSTEM Conductor Power Bar (DSL SYSTEM)Components & Specifications Power supply to the runway electrification shall be by means of bridge conductors and collector system as shown above. The typical components and specifications are as follows: Conductor Bar – Track are super finished and cross section is maintained to achieve required Ampere.The material for track is GI,Al/SS & Copper. Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. More than one conductor in a single enclosure will not be permitted. Maximum voltage drop from the building power takeoff point for the track electrification system tothe hoist motor shall not exceed 4 percent, and the equivalent conductance shall not be less Size of bridge conductors shall be proportioned to limit the total voltage drop in the conductors to a maximum of 3 percent of the supply voltage when the current on the individual motors is full load. Power feed – This is an attachment for incoming power and is a fully insulated simple clamp type is easily installed anywhere on the system for incoming power to the conductor rails. The power supply to the runway conductors shall be controlled by a switch or circuit breaker located on a fixed structure, accessible from the floor, and arranged to be locked in the open position. A fused, manual disconnect switch with a lockable handle mounted through the panel door shall be provided and wired into the incoming power circuit. All power for crane shall be supplied through one main visible blade fuse switch located on the crane bridge in an easily accessible position. 3) Collectors - Current collector assembly consists of a spring loaded sliding contact type shoe of hard copper alloy or sintered copper graphite. Shoe shall be mounted in an insulating case of phenolic or urea compound of suitable temperature and insulation quality. Exposed parts of current collectors shall be grounded and of corrosion-resistant material. Current collector assembly shall be designed to operate through gaps, splices, and switches and shall be self-centering. System shall include expansion sections for every 150 meter for systems using galvanized steel conductors and every 175 meter for systems using copper conductors. 4) Hangers- Supports the conductor bar, may also be used as an anchor to direct movement due to expansion and contraction 5) End Cover- Used to close the end of the conductors to cover exposed conductor and avoid accidental contact. 6) Insulating cover –Insulation cover shall be rigid PVC, self extinguishing, with a heat distortion point of 160ºF at 260psi. 7) Connector pins - Used to join the conductor bar sections together . System shall be complete with unit length conductors, insulating conductor covers, insulators, splices and splice covers, end caps, support brackets and fasteners, current collectors, expansion, isolation and power-interrupting sections, disconnect switch, and conduit and wiring to power takeoff point. We manufacture Dsl system ranging from 60A to 1250 A Advantages Of Our Dsl System 1.Dip of the track is maintain properly for movement of Current collector 2.Center Powerfeed is provided to decrease voltage Drop 3.The play between Track & Sleeve is Minimum 4.Current collector is provided spring steel with max dia to avoid breakage We give Test certificate & Warranty Certificate for Dsl system & There erection for Period of 1 Year

Electrical Equipments, electrical feeder pillars, power feeder pillars

Along with high level of skilled designers & programmers we also lead with high level of skill fabricators to achieve some of the most complex CONTROL DESK to suit our customer’s requirement.   Features :- Available in Floor mounting type. Degree of Protection :-IP-52 to IP-65. Painting: - Powder Coating, Spray Paint, Epoxy Paint. Compartmentalized design. Designed to accept 3-phase, 4 wire input volt. Provided with buzzer & hooter during emergency. Provided with 12/24 window annunciator for fault indication.    Application :-   These are widely used for :- »  Control & monitoring of various electrical motors, loads etc. of an electrical system. »  Protect against various electrical faults. »  Better & smooth trouble free electrical life of various electrical machines. »  Control Desk may save energy of an electrical system.

HG 2003/ 1 is a fully synchronised, true three phase angle thyristor power controller for 3 wire or 4 wire resistive, transformer coupled resistive & inductive loads. The output through 3 pairs of SCR''S in inverse parallel mode gives synchronised full wave control over all the three phases. The drive accommodates all feathers like soft start, current limit & over current limit as a standard features. It is built to work in harsh industrial environment. It gives very smooth control at the set value of a PID Controller with a 0 shoot up and shoot down which saves at least 5 to 10% of energy. This unit is well suited for Ovens, Kilns, Furnaces, Plastic Injection Moulding Machines & Many More where smooth control at set value is required. As this unit is vigorously tested in our own Furnaces, it can be used blindly on any equipment.   * Advanced hybrid design incorporating logic & analog circuits* Compact robust construction with copper bus-bars* Bulkhead mounting for easy installation* Self synchronizing* Isolated heat sink* shrouded electronics meeting CE norms for added safety* Field adjustable current limit & current trip* Phase angle control* Field adjustable soft start* Semi-conductor fuse* Line to load regulation* High to load rated SCR's* Configurable inputs* Standard models & customization* Comprehensive operating*  installation & trouble shooting manual*    

Features   Full-color HMI touchscreen A variety of 4.3” to 15” models with widescreen ensures the right fit for virtually any application 16M colors Industry-leading protocol conversion Communicate with over 300 protocols Easily convert between serial, USB and Ethernet devices Convert up to 6 protocols simultaneously with CR1000 and up to  15 with CR3000 Manage multi-vendor environments with ease Powerful Integration Capabilities Crimson 3.1 software enables point-and-click configuration Updated 3D symbols and primitives create a modern operator   experience Ethernet, USB and serial ports make communication simple Robust web server* provides remote access and control to   reduce costly site visits