Instrumentation Equipment Dealers in Kharghar, Navi Mumbai

Electric Control Panels are manufactured for the purpose of balanced and uniform electrical power distribution. We are one of the prominent Electric Control Panel Suppliers based in India. Electric Control Panels are developed with modern technology for safe and stable power distribution. Range Of Electric Control Panel Synchronizing PanelsCapacitor PanelHT & LT Distribution Panels,PCC, MCC PanelsAuto Mains Failure (AMF) Panel

• Voltage: 220V
• Body Material: Mild Steel
• Power: 1-3kw
• Power Source: Electric
• Phase: Double Phase
• Autoamatic Grade: Automatic
• Brand Name: SAAKVEE

Shrouded Bus Bar (DSL) system are used for the electrification of mobile equipment. This system is very easy to install and has less failure rate. Wear and tear is also less which improves life of the system. Smooth running of the DSL ensures best performance of control panels with VVF drives.   Features: Compact design Sturdiness Highly durable Epoxy coated, stainless steel, and insulated hangers for wet and corrosive atmospheres Factory bent curved conductor sections systems It is accident free It is compact and occupies less space Totally enclosed covers with flap for air-born contaminants, indoor & outdoor versions Bare conductors available for extreme heat applications Special long-wear collector brushes for systems Longer service life Rigid construction Easy to install Low Maintenance

• Features: Complete dog feed for the large breed bitch (from 26 to 44 kg) and her puppies : bitch at the end of gestation and during lactation - Weaning puppies up to 2 months old

The fruit of ongoing science from Royal Canin, start complex, is an exclusive combination of nutritional elements which are present in mother�s milk, Reinforced with specific nutrients which actively contribute to promoting digestive health and supporting the puppy�s natural defences. Easy rehydration the kibbles easily rehydrate to a porridge like consistency which is very palatable weaning puppies.

RTD Probes are well known in the nuclear industry for inspection of critical weld areas in pipes and pressure vessels. The realm of applications for these transducers is extensive: inspection of coarse grain austenitic steel, location of under cladding cracks, detection and sizing of IGSCC (Intergranular Stress-Corrosion Cracking), automated scanning of pipe and pressure vessels, and continuous high temperature applications.

• Input Phase: Single Phase
• Input Voltage: 230- 240 V
• Frequency: 50 Hz
• Automation Grade: Automatic
• Packaging Type: Box
• FEATURES: Energy Savings. Utility Company Rebates. Lower Cost. Smooth Start-Up. VFD allows precise pressure control and reduced noise level.

This is an AC current measuring sensor featuring CT technology, CT stands for current transformer, a transformer unit split in two half like a clamp for measuring alternating current source.  Non-invasive AC Current Sensor can measure a load up to 10 Amps AC source, simply clamp the current sensor on the live wire or neutral wire. The sensor measure the amount of current flowing through the wire. The output is a small AC signal which can be further use for energy meter application or for over-current protection of AC devices. To facilitate the application need the sensor has 3.5mm jack on the output side. Popular application of Non-invasive current sensor are like safe working on the high voltage electrical lines, protection of over current of the electrical device like AC motor, Air compressor.   Input Current 0-10 Amp AC Core Material Ferrit External Material Plastic Opening Size 13 x 13mm Output Plug 3.5mm Dielectric  Strength 6000V AC/1min Working Temperature -25-70°C Cable Length:  1-1.5m

• Usage: All type of liquids
• Specialities: High accuracy and reliable performance, long functional life and optimum quality
• Voltage: 220-360V
• Output: 4-20 mA/HART/Baching/Relay
• Condition: New
• MOQ: As Per Client Requirement
• Pipe Sizes: DN 10 to DN 1000

We are well known Exporter and Supplier of Copper Busbars in Maharashtra, India. Our Busbars are known for their perfect finishing and excellent quality. The Busbars that we offer are fabricated using high-grade copper in order to provide durability. We can provide Copper Busbars in different thickness, dimensions and other specifications. Our Copper Busbars has wide industrial application. We can make available Busbars at reasonable prices.

Stepper Motor Drives

tm218lda40drphn schneider plc, p3u30-6aaa2bcaa schneider protection relay

• Color: Available In Many Colors
• Conductor Material: Copper And Aluminium
• Insulation Material: PVC
• Rated voltage: 450/750 V
• Ambient Temperature: 40°C
• Quality: Superior

  110 Volts grade Control Copper cables, Solid/Stranded conductor, PVC/XLPE insulated, Armoured/Unarmoured ranging in single and multi core from 1.5 sq.mm and 2.5 sq.mm as per IS1554 / IS7098 (Part 1).  

• Voltage Supply: 20 To 30 VAC/DC
• Material: Aluminium
• Application: Pressure Measurement
• Color: Grey

Differential pressure is the difference of pressure measurements taken between two points in a system. It is usually used to measure the change in pressure of gases or liquids.

• Application: High precision temperature measurement
• Model: ETS-01
• Specifications: -10
• Details: Stainless steel material, Platinum resistor Pt-100

Features : Ample amount of spacing between the phase busbars Easy installation High reliability & extremely low maintenance. Précised ventilation slots. More economical in terms of current rating as compared to power cables of the same rating. Description : We manufacture L.T bus ducts of exceptional quality of the desired current rating and fault level which have the capability of conducting large amount of electric current through the aluminum or copper busbars. It is used in various industries to supply power from the secondary side of the transformer / outgoing side of the D.G set to the incomer side of the Main L.T panel / distribution panel. L.T Bus duct is the most preferred substitute to power cables. Usually it is preferred due to its high-power transmission ability. We design & manufacture efficient L.T bus ducts as the application demands or as per the customer’s specifications. We also provide MCCB’s or other electrical protection devices on customer’s demand to make it easier to control the power flow in events of maintenance/shutdown. Used In:   Commercial & Residential buildings Malls Pharmaceutical Plantss Chemical/Oil/Gas Plants Hospitals

• Usage: Industrial use
• Type: Lever Limit Switch
• Certification: ISO 9001:2008 Certified
• Color: Blue
• Condition: New
• Max. Voltage: 240 VAC
• Surface Finishing: Power Coated
• Current Rating: 10 Amps
• Switch Type: Lever Limit Switch

• Application: Multiple Application
• Model Number: copper busbars
• Brand Name: Panbase
• Supply Ability: 300 Ton/Tons per Month
• Place of Origin: Maharashtra, India
• Cu (Min): 99.90 Min
• Grade: Grades
• Packaging Details: Export Worthy Packaging, As Per Request from client.

• Automatic Grade: Automatic
• Minimum Order Quantity: 1 Piece

• Brand Name: Autonics
• Model: PSAN Series
• Pressure Measurement: Any gas, liquid or oil
• Standard Pressure: 0.1 kPa, 1 kPa

• Brand: Siemens
• Usage/Application: Electric Fitting
• Type: Current Relay
• Phase: 3 Phase
• Frequency: 60 Hz
• No.of Poles: Triple Pole
• Current: 100 A
• Voltage: 224 V
• Mounting Type: Direct
• Model Name/Number: XT2N 160
• Thermal adjustable: 0.8 to 1 In
• Magenatic Fixed: 10 In (fixed at 400 A for In 16 A and 25 A)

• Country of Origin: India
• Type: Temperature Transmitters
• Material: ABS Plastic
• Style: Head Mounted
• Certification: CE Certified
• Application: Industrial Automation

We offer wide range of Industrial Pressure-Temperature Transmitters used for converting weak, low-level RTD or thermocouple temperature sensor signal into high-level analog signal. This makes them more appropriate for long-distance transmission through a loud plant.

A Fire Alarm Control Panel (FACP), or Fire Alarm Control Unit (FACU), is the controlling component of a Fire Alarm System. A fire alarm system is number of devices working together to detect and alert people through visual and audio appliances when smoke/fire is present. These alarms may be activated from smoke detectors, and heat detectors.

• Technical Specification: Output Voltage DC: 11V to 15V +-5% AC Input Voltage: 240V/50HZ

Handy, Safe and easy to operate Emergency Halogen Light Flexible pivot light to operate in dark Cigarette lighter option for on the way charging Air compressor for inflating at emergency situations

Altair designs and offer PLC automation panels for all gas applications where remote operation & monitoring of gas equipments is required. PLC's with closed looped feedback system to communicate with BMS are programmable as per exact customer requirements. These panels are the most advance piece of equipments in gas control technology and easily integrate with various SCADA platforms.

• Alloy Or Not: Is Alloy
• Grade: Grades
• Place of Origin: Maharashtra, India
• Diameter: 2-20mm
• Model Number: copper busbars
• Length: 3000 - 5000 mm
• Brand Name: Panbase
• Packaging Details: Export Worthy Packaging, As Per Request from client.

• Phase: Single Phase
• Current Range: 20 A
• Usage/Application: Commercial
• Input Voltage: 220 V
• Power Source: Electric
• Frequency: 50 Hz
• Features: Longer working life,Easy to use,Fine finishing,High strength,Available in different configurations,Top performance