Instrumentation Equipment Dealers in Kopar Khairane, Navi Mumbai

• Features: High efficiency , Long functional life , Easy to use
• Item Code: A-701

GoGoA1 BLDC High Efficient Hub Motor kit Mechanical Parameters  Position:  Rear  Number of  Holes: 36  Cable Length: ~1ft  Cable Diameter: 6sqmm  Applications: Electric Bicycle/Ebike    Electrical Parameters  Rated Voltage(DCV): 48V  Rated Power :250W  Peak Power: 500W  Continuous Current: ~7.3A  Load Current: ~15.7A  no(rpm) 404  Regenerative: Yes  Max Torque: 60NM    Controller Specifications  GoGoA1 48V 23A 450W controller   Output Power: 350W    Operating  Voltage: 36/48V  Operating Current: 15A    How To Fit The Conversion Kit?  Motor – it depends on the type of wheel. It is easy to fit the Magnesium wheel hub– all you need is to replace your back wheel with the magnesium hub motor wheel. For fitting spoke wheels bicycle with the hub motor, you have to remove spokes from the wheel, place the motor and then put the spokes back. Controller and Battery box placing fully depends on your personal preferences.   

• Product Name: DI/Do
• MOQ: 10
• Size: 30

2 serial Ports, 1 USB Device , and 8 digital I/P - Bidirectional Type(3 Highspeed I/P),  Digital o/p PNP Type (2 high speed, 6 Normal)

In a large solar photovoltaic (PV) array, multiple solar modules are connected in series in a string to build the voltage up to proper levels for the inverter. Multiple strings of solar modules are then combined together in parallel to multiply the string output currents to higher levels for input into the inverter. The combiner box is a device that combines the output of multiple strings of PV modules for connection to the inverter. It is typically used in the larger commercial and utility scale PV power plants. The combiner box commonly houses the input overcurrent protection fuse assemblies for several strings, as well as the combined bus of those inputs into a single main output. Combiner box may also house several other components for the site, such as a DC disconnect, surge protective devices(SPD) and, in some cases, string monitoring hardware for SCADA system.

We are offering ac servo system. Extremely quick response time, highly precise, energy efficient, low vibration & noise, smooth running with accurate torque, customized programming, entire set

We are a prominent name offering quality-centralized array of products that are the perfect outcome of premium raw material and modern work methods. Also, we source the material from the reliable places only. Each consignment of ours is packaged carefully utilizing premium packaging supplies and technologies in order to maintain the products' environment and quality during shipping and handling.

The Electric Solar Panels that we offer are extensively used to convert the sunlight into electricity. These Solar Panels are made using high-grade components and appreciated for durability and corrosion resistance. Solar Panels that we offer are used for providing electricity to various sectors like residential, commercial, industrial, etc. Our Solar Panels are highly energy efficient and available at very affordable rates.

• Cabinet Material: Mild Steel
• IP Rating: 44
• Cable Entry: Back side
• Coating: Polished
• Current (A): 100
• Frequency (Hz): 50
• Mounting Type: Floor Mounted
• Output Voltage: 240V
• Phase Type: Single
• Power (kW): 5
• Automatic Grade: Automatic

This is an AC current measuring sensor featuring CT technology, CT stands for current transformer, a transformer unit split in two half like a clamp for measuring alternating current source.  Non-invasive AC Current Sensor can measure a load up to 100 Amps AC source, simply clamp the current sensor on the live wire or neutral wire. The sensor measure the amount of current flowing through the wire. The output is a small AC signal which can be further use for energy meter application or for over-current protection of AC devices. To facilitate the application need the sensor has 3.5mm jack on the output side. Popular application of Non-invasive current sensor are like safeworking on the high voltage electrical lines, protection of over current of the electrical device like AC motor, Air compressor.   Input Current 0-100 Amp AC Core Material Ferrit External Material Plastic Opening Size 13 x 13mm Output Plug 3.5mm Dielectric  Strength 6000V AC/1min Working Temperature -25-70°C Cable Length:  1-1.5m

• Large Memory: 128KByte Data Memory
• Connectivity: EtherNet
• EtherNet Port: 10/100Mbps
• Security: Powerful Password Protection
• Compatibility: Win XP/Vista/7(32/64bit)
• Performance: Optimum

• Application: Industrial, High-Rise Buildings
• Feature: Shorted output device, Heater current indication, Loop break alarms
• Phase: Three Phase

We have a team of professionals who keep their vigil eyes on the entire lot that is stored in the warehouse. This unit keeps the lot free from the factors like dust, rain, sunlight, etc. With the assistance of our modern transportation facilities, we are able to deliver the orders on time. Power Distribution Control Panels have excellent dimensional accuracy with excellent heat and chemical resistance. 

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

Our team professionals and experts ensure that the transactions done are exactly as per the guidelines. We maintain stern records of all the transactions done to gain complete satisfaction of our clients. Our organization is a famed one that is located in Navi Mumbai(India) and has a well-developed network for reaching different Navi Mumbai(India)s.

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

buildtrack home automation system, Johnson bathroom Fittings, finolex wire