Instrumentation Equipment Dealers in Rabale, Navi Mumbai

Output frequency 0.5-240 OHz Analog Setting(DCO-10V) and (DC4-20mA) Automatic Voltage compensation and slim compensation PWM frequency 1.5- 16KHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz

• Large Memory: 128KByte Data Memory
• Connectivity: EtherNet
• EtherNet Port: 10/100Mbps
• Security: Powerful Password Protection
• Compatibility: Win XP/Vista/7(32/64bit)
• Performance: Optimum

In industry, most of the load is inductive in nature which results in lagging power factor that is why there are loss and wastage of energy which results in high power bills and heavy penalties from electricity boards. If the load is uneven it is very difficult to maintain unity power factor. To overcome this difficulty apfc panel is used which maintains unity p.f. Features and applications : 1) high speed power factor correcting system is designed to compensate the reactive power of any load or equipment required p.f. Correction within one cycle of operating frequency or time delay of 30 sec to 5 min after command signal from apfc controller. 2) renders the distribution network more stable since there is no contactor switching causing high voltage transients, spikes, harmonics and other disturbances by applying zero crosses over voltage switching on and zero current switch off of the capacitors. 3) prevents voltage drop and flickering reduces failures in highly sophisticated electronic equipment like plcs. Computers and other control systems. 4) helps in reducing maximum demand and rkvah consumption hence a substantial reduction in monthly electricity tariffs. 5) it is highly suitable for spot welding applications where the reactive energy is to be compensated for a short period of 200 msec or less and for a number of times in a second. 6) accurate power factor control even in the presence of harmonics.

Applicable to all industries ethernet audio output extended temperature internal flash memory support micro sd slot supports functional keys & usb port custom aluminum front frame design.

• Application: Toxic Gas Transmitter for connection to PLC
• Brand Name: Technovation
• Voltage: 24 V DC, 24V DC
• Accuracy: +/-2% for O2, +/-5% for other gases
• Usage/Application: Online gas sensing suitable for connecting tube Multi gas PLCS
• Model Number: 4-20 mA, 4-20mA Transmitter
• Frequency Range: 50 Hz
• Output Value: 4-20 mA
• Input Value: PPM/% Gases
• Depth: 100 mm
• Height: 100 mm
• Product Weight: 300 grams
• Rated Supply Voltage: 12-28 V DC

This motor control center panels is exclusive tailor made product & is designed as per requirement of customer. Nos. of motors are started from this panel center & mostly these are DOL or Star- delta Starter motors. All the push buttons & indicators are mounted on panel or remote controlled.    Features :- Simplex & Duplex pattern. Degree of Protection :-IP-52 to IP-65. Painting: - Powder Coating / Spray Paint / Epoxy Paint. Compartmentalized design eliminates risk to maintenance personal. Sufficient space for incoming and outgoing cables. Provided with buzzer & hooter during emergency. Separate Bus bar and cable chambers. Motor Control Center shall have hinged door with lockable arrangement. Motor Control Center shall have detachable gland plates of 2-3mm thick. Motor Control Center Available with Aluninium / copper bus bar. Fabricated with 2/2.5/3mm CRCA sheet steel. Motor Control Center is suitable for use on 415V, 3Phase, 4 wire, 50H.z    Application :-   These are widely used for :- »  Protection against electrical Short Circuit, overload and earth fault of the system. »  Control & monitoring of the entire electrical system of an industry / plant. »  Systematic power catering to various load of an electrical system. »  Normally used in Hospitals, Multi-storied buildings, steel industries, cement industry, open –cast mines, shopping 

Combustible Dust: Zone 21 & Zone 22 as per IEC600079-2, Combustible Dust: Class II, Division 1 & Division 2 as per NFPA 496 Hazardous Gases Vapours: Zone 1 & Zone 2 Gas Group- IIA, IIB, IIC as per IEC600079, Hazardous Gases Vapours: Class I, Division 1 & Division 2, Gas Group A, B, C &D as, over 300 Purge Panels for various applications and they are functioning without a single failure till now Our supplied panels not only working in in India but also in various countries like Dubai, Qatar, Saudi Arabia KSA, Oman, Abudhabi,Kuwait and also in Austria, Germany, USA, Australia, Sri Lanka, Singapore, Malaysia, Vietnam, Indonesia, India, Nigeria, China, South Korea, Bangladesh, Zambia, Kazakhstan, Uzbekistan, North Africa, Moroco etc.

• Ratings range: 63A up-to 400A

Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections. Drawout Panel Accessories With drawable panel accessories are in direct contact with the vertical bus-bars. The power contacts are available in ratings from 63A up-to 400A. The Power contacts are tested from mill-volt drop & temperature rise at C.P.R.I. Laboratories. Sunesons has recently developed a new set of main power contacts with a swivelling rear link, which makes it convenient for use in power feeders that have bus bar connections to be made between the pore contact & the switchgear. These contacts are available in a ratings of 100A to 630A. They are tested for mill-volt drop & temperature rise at C. P. R. I laboratories. Spring-loaded, tinsilver plated main power contacts are provided for both the incoming as well as outgoing side main circuit connections.

We are well known manufacturers as we deal with electrical devices that are immensely important in the day to day industrial life. They are fabricated in such a manner that they impart all the functional properties in a definite manner. The very appearance of it is installed with various technical arenas but they are offered by us with elaborated manuals that are very easy to understand. The very purpose of this panel is to contribute to the ongoing work without fail. Features: Elaborated version. Precise make. Good quality.

We manufacture, supply and export a complete range of Control Panels. Fabricated using high grade components, these control panels strictly conform to the international quality standards.

• Width: 1000mm

It can give you multiple benefits including applying it over the roof as well as under roof insulation. The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work. Apart from temperature or thermal insulation and upholding your premises or industry in better climate condition in higher temperature, low cost is another advantage why the popularity of roof insulation is increasing. One can apply as much as insulation to make it thicker and more thermal barrier as there are very little difference on the overall cost. Apart from temperature conversation and heat resistance, roof insulation material also gives helping hand to your pocket. It also saves money because every bit of loss in temperature can result into to higher energy consumption and higher expense.

We are offering electrical cables. Having accomplished a strong foothold in the engineering sector, silverline metal engineering is pioneer in the domain of manufacturing crane components.

Type tested to conform to leading Global Product Standards. (IEC-61439-1 & 2). Fully Compartmentalized (Form IV) Design. Drawout modules are simply pushed in for withdrawal, ensuring smooth & tool-less operation. Drawout modules plug-in directly on to Vertical Bus Bar, minimizing maintenance issues. Vertical Bus is Joint-free along the feeder area, therefore is highly reliable. Safety shroudshutter providing IP 20 levels of segregation upon withdrawal. Shock-free operation with Double Stab-in earthing in all Drawout modules. Fully Bolted Modular Structural design. Drawout Modules have interlocks for Test, Service & Isolated positions. Drawout Modules available in 3 Pole for Starter feeders & 4 Pole for Power feeders.

We are a buyer's best bet when it comes to purchasing Perforated Acoustic Panel. Our company is a promising supplier. We have an in-house facility, which is used for making stocks. Laced with modern amenities, our storehouse keeps the products away from moisture, rainwater, sunlight, etc.

DSL SYSTEM ALSO KNOWN AS DOWN SHOP LEAD SYSTEM Conductor Power Bar (DSL SYSTEM)Components & Specifications Power supply to the runway electrification shall be by means of bridge conductors and collector system as shown above. The typical components and specifications are as follows: Conductor Bar – Track are super finished and cross section is maintained to achieve required Ampere.The material for track is GI,Al/SS & Copper. Conductors shall be accurately aligned to ensure positive electrical contact between the collector and the conductor. Separate conductors shall be provided for each phase. More than one conductor in a single enclosure will not be permitted. Maximum voltage drop from the building power takeoff point for the track electrification system tothe hoist motor shall not exceed 4 percent, and the equivalent conductance shall not be less Size of bridge conductors shall be proportioned to limit the total voltage drop in the conductors to a maximum of 3 percent of the supply voltage when the current on the individual motors is full load. Power feed – This is an attachment for incoming power and is a fully insulated simple clamp type is easily installed anywhere on the system for incoming power to the conductor rails. The power supply to the runway conductors shall be controlled by a switch or circuit breaker located on a fixed structure, accessible from the floor, and arranged to be locked in the open position. A fused, manual disconnect switch with a lockable handle mounted through the panel door shall be provided and wired into the incoming power circuit. All power for crane shall be supplied through one main visible blade fuse switch located on the crane bridge in an easily accessible position. 3) Collectors - Current collector assembly consists of a spring loaded sliding contact type shoe of hard copper alloy or sintered copper graphite. Shoe shall be mounted in an insulating case of phenolic or urea compound of suitable temperature and insulation quality. Exposed parts of current collectors shall be grounded and of corrosion-resistant material. Current collector assembly shall be designed to operate through gaps, splices, and switches and shall be self-centering. System shall include expansion sections for every 150 meter for systems using galvanized steel conductors and every 175 meter for systems using copper conductors. 4) Hangers- Supports the conductor bar, may also be used as an anchor to direct movement due to expansion and contraction 5) End Cover- Used to close the end of the conductors to cover exposed conductor and avoid accidental contact. 6) Insulating cover –Insulation cover shall be rigid PVC, self extinguishing, with a heat distortion point of 160ºF at 260psi. 7) Connector pins - Used to join the conductor bar sections together . System shall be complete with unit length conductors, insulating conductor covers, insulators, splices and splice covers, end caps, support brackets and fasteners, current collectors, expansion, isolation and power-interrupting sections, disconnect switch, and conduit and wiring to power takeoff point. We manufacture Dsl system ranging from 60A to 1250 A Advantages Of Our Dsl System 1.Dip of the track is maintain properly for movement of Current collector 2.Center Powerfeed is provided to decrease voltage Drop 3.The play between Track & Sleeve is Minimum 4.Current collector is provided spring steel with max dia to avoid breakage We give Test certificate & Warranty Certificate for Dsl system & There erection for Period of 1 Year

    FEATURES * HMI* I/Os (upto 50) * 1 Analog Input*  MODBUS Communication* 24 VDC to drive inputs* Encoder Input   APPLICATIONS * Heating*  Loading & unloading of material*  Close loop operation* Chemical Process*  Industrial Process   DESCRIPTION programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

HG 2003/ 1 is a fully synchronised, true three phase angle thyristor power controller for 3 wire or 4 wire resistive, transformer coupled resistive & inductive loads. The output through 3 pairs of SCR''S in inverse parallel mode gives synchronised full wave control over all the three phases. The drive accommodates all feathers like soft start, current limit & over current limit as a standard features. It is built to work in harsh industrial environment. It gives very smooth control at the set value of a PID Controller with a 0 shoot up and shoot down which saves at least 5 to 10% of energy. This unit is well suited for Ovens, Kilns, Furnaces, Plastic Injection Moulding Machines & Many More where smooth control at set value is required. As this unit is vigorously tested in our own Furnaces, it can be used blindly on any equipment.   * Advanced hybrid design incorporating logic & analog circuits* Compact robust construction with copper bus-bars* Bulkhead mounting for easy installation* Self synchronizing* Isolated heat sink* shrouded electronics meeting CE norms for added safety* Field adjustable current limit & current trip* Phase angle control* Field adjustable soft start* Semi-conductor fuse* Line to load regulation* High to load rated SCR's* Configurable inputs* Standard models & customization* Comprehensive operating*  installation & trouble shooting manual*    

• Application: IEC Standard
• Voltage: 220 V/380 V/400 V/660 V/690 V
• Frequency: 50/60Hz

With the assistance of our modern transportation facilities, we are able to deliver the orders on time. We have developed automated warehousing system that ensures us safe assembling as well as storage of the products. This system is handled by our professionals. Power Control Center Panels are largely used in ships, aircraft, mainframe computers and many other things. 

We are a prominent name offering quality-centralized array of products that are the perfect outcome of premium raw material and modern work methods. Also, we source the material from the reliable places only. Each consignment of ours is packaged carefully utilizing premium packaging supplies and technologies in order to maintain the products' environment and quality during shipping and handling.

we are looked upon as the prime manufacturer, supplier and exporter of compact pressure transmitter which is specially designed to offer accurate transmission and measurement of pressure. Ideally suited for hydraulic applications which are subjected to severe shocks, vibrations, and electro-magnetic interference, the compact pressure transmitter offered by has been termed as the best option available in the market. attributes : pressure ranges from 0 .. 0.25 bar to 0 ... 1000 barwiring with l-connector or flying leadingress protection ip 65 or ip 67medium temperature -30 ... + 100 °c / -22 ... + 212 °fvacuum tight applications : mechanical engineeringhydraulics / pneumaticsgeneral industrial applications click here for more information

• Frequency: 50 - 60Hz
• Surface Finished: Coated
• Capacity (Ampere): 100
• Meter Type: Analog
• IP Rating: IP45
• Phase Type: Three Phase
• Voltage (V): 380 - 440
• Humidity (%): 85
• Cable Entry: Back Side
• Automatic Grade: Semi-Automatic
• Body Material: Mild Steel

Conventional Traditional fire alarm panels installed prior to 1998 were conventional zone panels. In a zoned system, fire alarm devices in a common area or floor of a facility are connected to the same alarm initiating circuit. Each zone requires its own circuit conductor. This arrangement allows alarm annunciation to be reported by areas of the building to identify which device is in alarm. Conventional panels are often used in small facilities where a few zones can provide sufficient alarm annunciation.  Addressable With the advent of microprocessors and digital electronics, addressable fire alarm control panels and devices have become more common than conventional systems for medium and large-sized facilities. They have become more cost effective in some small applications as well. Addressable fire alarm systems use digital encoding and multiplex technology to more accurately identify alarm locations and device conditions. Each fire alarm device in a system is programmed with a unique address. The fire alarm control panel is capable of communicating with a single address or a group of addresses depending on the functions required. The communication is often multiplexed over a common cable, sometimes referred to as the signaling line circuit (SLC). This arrangement significantly reduces the amount of cabling necessary to install the system. The communication channel allows two-way communication, thus enabling the fire alarm control panel to control as well as monitor fire alarm devices. A significant component of addressable fire alarm system is the software programming necessary to make the system function correctly. The programming allows for flexible applications where you want to have specific control over the inputs and outputs. The communication technologies employed in addressable systems allow for advanced features to accommodate sensitivity changes due to age and accumulation of dust prior to maintenance. These features are not available with the standard conventional system.   Fire Alarm Devices Automatic Detection Components of a fire consist of: Smoke (particulate and aerosol) Heat Light Radiation Fire detection devices are built to detect one or a combination of these components. While all components are necessary for a fire to exist, all components may not exist at a detectable threshold. Detectors will be selected that will detect the elements that may exist in a fire for the ambient conditions that are present. It also should be realized the similar non-fire components might exist in the same ambient conditions, which could cause unfavorable false alarm conditions. Devices used for fire detection include smoke detectors, thermal detectors, flame detectors, fire-gas detectors, and other devices. Smoke detectors sense visible or invisible particles of combustion generated by burning, smoldering, or the incipient stage of combustion. These devices fall into two categories -- photoelectric and ionization. Thermal detectors sense the high temperature or the temperature rise caused by a fire. Flame detectors sense the radiation produced by a fire. Fire-gas detectors sense the gases produced by a fire. Other detectors sense some phenomenon other than smoke, thermal, flame, or fire-gas to detect a fire. Smoke Detectors There are three types of smoke detectors: Ionization, photoelectric, and combination.   Ionization The ionization smoke detector is widely used. Its capability to detect smoke originating from fire is best utilized for clean-burning fires that produce small particles during combustion.   The ionization smoke detector consists of an alpha particle producing a radioactive source, a smoke chamber, and charged detector plates. The alpha source causes the air within the smoke chamber to become ionized and conductive As smoke particles enter the smoke chamber, the smoke particles attach themselves to the ionized air molecules and the air in the chamber becomes less conductive When the air conductivity within the chamber drops below a predetermined level, the alarm is triggered Advantages of Ionization Smoke Detectors: Detects invisible products of combustion -- It can detect fires that are in the incipient stage or detect other aerosol-type smoke products Quick acting -- Provides for earlier detection than other types of smoke detectors or thermal detectors

• mono solar panels: poly solar panels
• multi solar panels: all solar panels

We are offering solar panels from 2 watt to 320 watt. monocrystalline type, polycrastalline type, multicristalline type. for all type of photovoltaic applications

Our team professionals and experts ensure that the transactions done are exactly as per the guidelines. We maintain stern records of all the transactions done to gain complete satisfaction of our clients. Our organization is a famed one that is located in Navi Mumbai(India) and has a well-developed network for reaching different Navi Mumbai(India)s.

• Type: Thermocouple
• Material: Stainless Steel
• Length: 2.5mtr, 3.5mtr, 3mtr, 4mtr
• Application: Industries
• Power Source: Electric
• Feature: Durable, Fine Finished, High Strength, Quality Tested, Reliable
• Tenmperature: 0-100 Deg C, 100-200 Deg C, 200-300 Deg C, 300-400 Deg C, 400-500 Deg C
• Power Source: Electric
• Material: Stainless Steel
• Surface Treatment: Powder Coated
• Frequency: 50 Hz
• Temperature Range: 0-200 Degree C
• Voltage: 220 V

• Condition: New
• Power Source: Electric
• Application: Battery Clamps
• Feature: Durable
• Type: Jump Starter
• Country of Origin: India

WE ARE DEAL WITH  CAR MECHANICAL WORK, CAR DENTING WORK, CAR ELECTRICAL WORK, CAR PAINTING WORK,7506051356

• Brand Name: Spark Motors
• Temperature: Max. 40 Degree C
• Width: 76 mm
• Length: 118 mm
• Height: 33 mm
• weight (Greater than): 300 g
• Output Cuurent: 4.5 A
• DC Power Input Type: 50VDC
• Humidity: Greater than 90

We are successfully meeting the demands of generator control panels which have high demand among our valued clients for their capability to deliver efficient performance standards. These generator control panel are manufactured using quality materials procured from reliable vendors including switched, aluminum, copper, L angle, CR sheets, which provides in them optimum functionality standards. Further, we deliver these generator control panels in modular, compact, and rugged construction with fully compartmentalized design options. Features - Controls for diesel generators consist of following:     Auto mains failure DG panels   Auto synchronizing panel   Standard DG panel

• Input Method: Finger
• Glass Thickness: 3mm (for sensor size above 10.4)
• Chattering Time: 10 ms or less

Capacitive touch sensor uses its remarkable patented FFT (Film Free Technology) to maintain accuracy and robustness in a variety of harsh environments over the life of the product. Capacitive sensors provide a solution for high-use applications that demand reliable, accurate and sensitive touches performances. Capacitive touch sensor surface with protective hard coat enables scratch-resistance and contaminant-resistance to dirt, dust, liquids and corrosive chemicals. Capacitive sensors have been tested to withstand over than 300 million touches in a single location without noticeable degradation.