Laboratory Cement Autoclave Dealers

With stainless steel chamber (21 kgcm.sq. Pressure) The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height suitable for operation on 230 v, 50 Hz, Single Phase, A.C.Supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant
• Drive Type: Electric

We are instrumental in offering excellent quality Laboratory Cement Autoclave. It is used for conducting accelerated soundness tests on cements. Also, Laboratory Cement Autoclave facilitates the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure.  The Laboratory Cement Autoclave consists of a stainless steel cylinder with a welded heat insulated voer. Control unit of the instrument encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units. Further, Laboratory Cement Autoclave is provided with test bar holder.Specifications : Inside chamber dimensions - 10.5 cm diameter x 40.5 cm height Suitable for operation on 230 v, 50 Hz, single phase, ac supply

It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kgcm2 pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply. Supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

• Material: Stainless Steel
• Application: Laboratory Use
• Power: 2000 watts
• Inside Chamber Dimension: 15 Cm Dia X 40.5cm Height.
• Pressure Range: 21 Kg/cm2
• Least Count: 04 kg/cm2
• Temp. Range: 215 Deg C
• Power supply: 230 Volts AC , 15 Amp

silent features: rust proof stainless steel pressure vessel specially designed steam safety valve, pressure control switch and temp. control switch - triple safety precautions for operator safety accurately calibrated pressure gauge guaranteed timings and performance as per is 4031 general description & speci???cations the autoclave is double walled. inner boiler chamber of stainless steel cylinder, with concealed yet easily replaceable heaters surrounding the vessel for quick heating. the boiler lid is of thick stainless steel and can be bolted to the chamber by heavy hexagonal nuts. the silicon gasket, seated in a groove, makes the unit leak proof even at high pressure. the boiler is mounted in between the strong angle iron frame and covered with crc sheet – attractively powder coated. the outer cover can also be of stainless steel at an extra cost. the gap in between the walls is ???lled with thermal insulation to prevent heat loss and energy. the control system

The Laboratory Cement Autoclave is suitable for conducting accelerated soundness tests on Cement or the Autoclave expansion test. The equipment meets the requirement of IS: 4031 (P-3). The equipment consists of a Stainless Steel Pressure Vessel with insulated outer shell, fabricated out of high quality Stainless Steel Sheet. The pressure inside the vessel is controlled through a micro processor based PID controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, PID controller with RTD for control of Heater unit.Specification Working Pressure : 21 Kg / cm² ± 1kg / cm² at 215° C Pressure Vessel : ID 150mm X Depth 500 mm Overall Dimensions : 390 mm (L) X 390 mm (W) X 810 mm(H) Weight : 70 Kg Heater : 3000 Watts Supply : 220 V, 50 Hz, 1 phase Panel mounted PID controller with international safety certifications. Product Code: EKE 408-1Standrad: IS : 4031 (Part - 3)Optional Extra EKE 40201 Set of 20, Smooth Reference Points EKE 40501 Set of 20, Knurled and Threaded Reference Points FeaturesRust proof stainless steel pressure vessel & enclosure Microprocessor based PID controller for accurately controlling the temperature & pressureThree fold safety mechanism for the equipment & the operator Reliable sillicon rubber lid sealing gasket. Very Compact

It consists of a stainless steel cylinder with an insulated cover, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating units. Inside Chamber dimensions: 15 cm dia x 60 cm height, with stainless steel Cylinder (20 kg/cm2 pressure capacity) Suitable for operation on 220 V, 50 Hz, Single Phase, AC Supply and supplied complete with Test Bar Holder, Special Rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner.

The Autoclave is suitable for conducting accelerated soundness tests on cements of the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a weldedheat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing, attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge, power switches and pilot lights forcontrolling the electric heating units.

Product Code: EKE 408-1Standrad: IS:4031 (Part - 3)   SPECIFICATION   Working Pressure : 21 Kg / cm² ± 1kg / cm² at 215° CPressure Vessel : ID 150mm X Depth 500 mmOverall Dimensions : 390 mm (L) X 390 mm (W) X 810 mm(H)Weight : 70 KgHeater : 3000 WattsSupply : 220 V, 50 Hz, 1 phasePanel mounted PID controller with international safety certifications. The Laboratory Cement Autoclave is suitable for conducting accelerated soundness tests on Cement or the Autoclave expansion test. The equipment meets the requirement of IS: 4031 (P-3). The equipment consists of a Stainless Steel Pressure Vessel with insulated outer shell, fabricated out of high quality Stainless Steel Sheet. The pressure inside the vessel is controlled through a micro processor based PID controller. The equipment is supplied complete with spring loaded safety valve pressure gauge, PID controller with RTD for control of Heater unit. FEATURES Rust proof stainless steel pressure vessel & enclosure Microprocessor based PID controller for accurately controlling the temperature & pressure Three fold safety mechanism for the equipment & the operator Reliable sillicon rubber lid sealing gasket. Very Compact Optional Extra EKE 40201 Set of 20, Smooth Reference PointsEKE 40501 Set of 20, Knurled and Threaded Reference Points

The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.

The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature.  

The high pressure autoclave is designed for conducting accelerated soundness tests on cement or the autoclave expansion test. It is also suitable for other testing purposes requiring constant steam pressures between 60 and 350 pounds per squire inch, with the correspondent constant temperature. The autoclave consists of a drawn steel cylinder with a bolted cover. It is mounted in in a sturdy supporting frame and enclosed in heat insulated metal housing which is attractively finished in stove krankle paint. The control unit attached to the side of the housing encloses a sensitive pressure regulator and pressure gauge, power switches, pilot-light for controlling the electric heating units. Inside chamber dimensions are 6-d18" in dia by 16" hight fitted with 3 Nos. heating elements of 2400 watts.

• Dimensions: 10.5 cm
• Diameter: x 40.5 cm

The autoclave is suitable for conducting accelerated soundness test on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure.It is consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metal housing attractively finished. The attached control unit encloses sensitive pressure regulator and pressure gauge, Power switches and pilot lights for controlling the electric heating units.

• Automation Grade: Semi Automatic
• Material: Stainless Steel
• Voltage: 220/240V
• Brand Name: SISCO INDIA
• Inner Chamber: Stainless Steel
• Usage/Application: Laboratory

• Application: Laboratory
• Material: Stainless Steel
• Inside chamber dimensions: 15 cm dia x 40.5cm height
• Power Rating: 2000 watts
• Pressure range: 21 kg/cm2
• Least Count: 04 kg/cm2
• Temp. range: 215 deg C
• Power supply: 230 Volts AC 
• Current: 15 Amp

• Type: Laboratory Cement Autoclave
• Material: Carbon Steel, Metal, Mild Steel, Stainless Steel
• Shape: Horizontal, Vertical
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Application: Laboratory Use
• Weight: 1-10kg, 20-30kg, 30-40kg, 40-50kg
• Color: Black, Golden, Grey, Grey-Golden, Metallic, Shiny Silver, Silver
• Voltage: 240V, 380V, 440V, 580V
• Condition: New, Used
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Surface Finishing: Polished, Power Coated
• Feature: Accuracy Durable, Auto Reverse, Dimensional, Hardend & Temper, High Quality, High Tensile
• Temperature: 0-50ºC, 100-200ºC, 50-100ºC
• Automation Grade: Manual, Semi Automatic

  BIS-4031. It is high pressure autoclave designed especially for conducting accelerated soundness tests on Cement or the autoclave expansion tests. It mounted in a sturdy supporting frame, and enclosed in a heat-insulated/metal housing which is attractively finished in hammertone paint. The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switcnes and pilot light for controlling the electric heating unit.

• diameter: 10.5 cm
• height: 40.5cm

The autoclave is suitable for conducting accelerated soundness tests on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It consists of a stainless steel cylinder with a welded heat insulated metal housing attractively finished. The attached control unit encloses a sensitive pressure regulator and pressure gauge. Power switches and pilot lights for controlling the electric heating units. Inside chamber dimensions 10.5 cm diameter x 40.5cm height suitable for operation on 230 V, 50 Hz Single Phase A. C. supply. Supplied complete with test bar holder, special rack to hold specimens above water level in the autoclave and in a vertical position to expose them in the same manner. A Digital PID Controller is fitted for controlling the desired temperature. Ordinary laboratory cement autoclave with mild steel chambers are also available.

Laboratory cement autoclave These products are appreciated by the clients in domestic as well international market due to their durability, easy operations, compact designs and robust construction.