Machine Parts Dealers in Rabale, Navi Mumbai

• Thickness: 2mm To 7mm Thickness
• Surface Finishing: Polished
• Weight: As Per Size
• Country of Origin: Made In India
• Material: Ferrous and Non Ferrous All Grade Metals
• Application: Industrial and Automotive etc.
• Size: 1mm to 150mm diameter
• Min. Order: 50kgs to 1000kgs
• Finish: As Per Customer Specification

Special Metals Machined Components We provide the best quality machined components. These machanied components are special metals which are in variably resistant to erosion, corrosion and stress-corrosion cracking.

Fasteners & Machined Components in fabrication and machining of exotic metals like Ti, Ta, Zr, Has B & C Ni and its alloy. We offer all type of Bolt, Nut and other machined components like shaft, sleeve as per ANSI, DIN, BS and IS standards.

With our fully in-house setup as in Powder Coating and latest CNC machine, a dedicated team of programmers, designer, and operators work hard along with this state-of-the art machinery to offer complete solution to the customer. With 23Ton of punching force, 500 x 500 part shoot, 2.5Meter without repositioning machine along with wide range of tooling we are able to achieve critical componets with high accuracy amd minimum leadtime. Moreover availablity of In-house powder coating plant boosts our efficency and provides our customer with full soluton under one roof.

• Weight (lbs): 6.45 lbs.
• Stroke Range: 3.1 inches
• Bore Size (inch): 2.6 inches

The function of the core inlet guide vane (CIGV) actuator is to mechanically position the inlet guide vanes when commanded by the full authority digital engine control (FADEC). During normal operation, the actuators are modulated according to the FADEC based upon feedback from the master’s linear variable differential transformer (LVDT) signal. Typically, there are two types of CIGV actuators, master and slave. The master is the only one that contains an electro hydraulic servo valve (EHSV) and a LVDT position sensor provides electrical feedback to the FADEC. Generally, core inlet guide vane (CIGV) actuators are fuel or oil operated. Fuel enters the EHSV cavity of the spoolsleeve area through the “P” inlet port. Electrical signals sent to the dual-coil servo from the full authority digital engine control (FADEC) cause the servo to modulate pressures Control 1 (C1) and Control 2 (C2). C1 and C2 are connected to the two chambers of the actuator piston.

• FEATURES: Sealing system proven to have low-external leakage, minimal friction, and reduced contamination • LVDT adjustment feature which guarantees actuator-LVDT assembly and interface accuracy
• Weight (lbs): 6.45 lbs.
• Stroke Range: 3.1 inches
• Bore Size (inch): 2.6 inches

The function of the core inlet guide vane (CIGV) actuator is to mechanically position the inlet guide vanes when commanded by the full authority digital engine control (FADEC). During normal operation, the actuators are modulated according to the FADEC based upon feedback from the master’s linear variable differential transformer (LVDT) signal. Typically, there are two types of CIGV actuators, master and slave. The master is the only one that contains an electro hydraulic servo valve (EHSV) and a LVDT position sensor provides electrical feedback to the FADEC.

• Brand Name: NSK
• Material: High Carbon Steel
• Shape: Rectangle
• Usage/Application: Industrial
• Made In: Japan/Korea
• No of Hole: 3

Polyurethanes are known for Abrasion and Tear Resistance, best amongst all engineering thermosetting plastics known. Transportation of ferrous and non ferrous Sheets, Plates, Rods, Bars, Coils or chains, results cutting of even respective metallic object. JEPL selected and formulated compositions have been working beyond customer expectations hence preferred.   Two types formulations are considered on the basis of application at site.           Polyester Polyurethanes For :     Cut resistance Oil and Solvent resistance Impact and Abrasion resistance           Polyether Polyurethanes For: :     Water Resistance Good compressive ability High temperature Stability     Though shore hardness is the key word used for the application selection, JEPL understands to read between the lines to identify and at times modifies the formulation to satisfy customer needs more accurately. We believe when Roller works with Customer, his confidence works with us.

CNC Machined Stainless Steel Parts, offered by us, are manufactured by our seasoned professionals with great precision. These parts are made from different grades of stainless steel such as AISI 303, 304, 316, 316L, 430, 413, etc. Also, our CNC Machined Stainless Steel Parts are subjected to stringent tests in order to ensure their defect-free delivery at the customers’ end. One can obtain CNC Machined Stainless Steel Parts from us in both retail and bulk quantities.

• Material: Stainless Steel
• Thickness: 2-10 mm
• Hardness: 55-80 HRC
• Weight: 10-150 gram
• Tensile Strength: 100-300 Mpa

x-ray machine parts, dental x-ray machines, Laboratory Equipment

Vessels, Spiral L Type Fins, rectangular fins

Industrial Machinery Parts, Used Industrial Machinery, Tool Room

Press Parts, Deep Drawing Machine, Jigs, tube end forming machine

Traub Components, precision cnc lathe

metal pressed component

STAINLESS STEEL SHIM, Perforated Plate, Perforated Sheet, Stainless Steel

machined component, alloy steels, Washers, Titanium

brass sheet metal, Nuts, Bolts, Washers

Sheet Metal, drawout mcc enclosures, drawout mcc enclosures

dsl system, Metal, Construction Equipments, Fabricated Equipments

rail clamps, Material Handling Equipment, Jib Crane, Goods Lift

Sheet Metal, FABRICATION

Laser Marking machine Spare parts, bis Hallmarking Center Project Report

Blister Machine Format Parts, Galaxy Cartoning Machine

sheet metal components for elevator / furniture

Textile Machine Spare Parts, Textile Machinery

Sheet Metal Dies, bakelite moulding, Paper Plate Mould, moulding boxes

Angle Rings