Measuring Instruments Dealers in Kamothe, Navi Mumbai

Reflex level gauges applicable upto 200 kgcm2 and upto 400 deg cent cryo applications upto-196 deg cent toughened borosilicate glass with swerrations for applicability in critical, acidic, cryo and temperature zone ibr certified device available nace,h2s service compatibility applicable.

• Material: Metal
• Application: For Liquid Measuring
• Color: Blue, Grey, Orange, Shiny-silver, Silver
• Condition: New
• Frequency: 0-25Ghz, 25-50Ghz
• Beam Angle: 0-5 Deg, 5-10 Deg
• Country of Origin: India
• Process Pressure: 0-0.5Mpa.0.5-1Mpa
• Range: 0-30Mtr
• Signal output: 0-20mA

• Application: Industrial
• Brand Name: Testo
• Battery Type: 9v battery
• Weight: 300 g
• Working Temperature: +5 to +45 C
• Measuring Range: -300 to +300 hPa

• temperature: -0

Standard Industrial pH Electrode Configuration:- Model:-REF-200, Working pressure: 0.4MPa (Even high pressure is option)Cable length: 5 meter with BNC header Glass electrdoe, NYLON jacket. HIGH PERFORMANCE pH Electrodes Configuration:- Model:- REF-300, Working pressure: 0.6MPa (Even high pressure is option), Cable length: 5 meter with BNC header (VP header is optional)Glass electrdoe, PPS jacketLiquid ground pole: Available. Can be used in dual high-impedance differential amplifier, improve anti interference, improve response speed.

• Brand Name: REFINEMENT
• Usage/Application: Industrial
• Model Name/Number: REF-1000pH

We are offering portable ph meter, temperature meter, mv meter etc. the meter are used to measure acidity and alkalinity of liquids. microprocessor-based: sts-321 has built-in high performance cpu, it can work about 200 hours continuously with 9 volt battery. two points push-button calibration: the meter with two points calibration function, it will prompt ph calibration solution when you calibrate the meter, you need only immerse the ph electrode into standard solution and press enter key, then the meter will be calibrated automatically. auto-buffer recognition: in calibration, the meter will display error if you use ph standard solution by mistake or not by the calibration prompt. Viewing of electrode slope: after calibration, the meter will indicate electrode slope, you can judge by the indicator to replace electrode or not. automatic temperature compensation: sts-3 series with temperature sensor, you can view temperature value on the lcd, the meter with automatic temperature compensation for accurate reading under changing conditions. hold function: the meter with hold function, press meashold key, the meter momentarily freezes reading. Message indicator: sts-3 series with operational message indicator. When you need setup or measurement, the message indicator will help you what you can do and how do it. You can set parameter or select functions under it's guide. Save data: the meter can save 50 data sets, press save key, and the meter will store current measured value, serial number, date, time and other information. Output data: the data can be sent to computer through usb communication interface, you can print out test report via software. model sts-321 ph range -2.00~16.00ph ph accuracy ±0.01ph mv range 0~±1999mv mv accuracy ±1mv orp range 0~±1999mv orp accuracy ±2mv temperature range 0~100.0 or 32~212of temperature accuracy ±1.0, ±1.8of temperature compensation 0~100.0, 32~212of calibration points 2 points ph standard solutions nist, ph4.006.869.18 or usa, ph4.017.0010.01 memory 50 output usb power requirement 9v800ma battery display 4.3 inch lcd dimension 185(l)mm×88(w)mm×32(h)mm weight 300g

• Weight: 205 g (7.2 oz.)
• pH Range: 0.00 to 14.00 pH
• pH Resolution: 0.01 pH
• pH Accuracy: ±0.01 pH
• pH Temperature Compensation: Automatic
• EC Range: 0 to 3999 µS/cm
• EC Resolution: 1 µS/cm
• EC Accuracy: ±2% F.S.
• TDS Range: 0 to 2000 ppm (mg/L)
• TDS Resolution: 1 ppm (mg/L)
• TDS Accuracy: ±2% F.S.
• EC/TDS Temperature Compensation: Automatic with β adjustable from 0.0 to 2.4% / °C
• EC to TDS Conversion Factor: 0.45 to 1.00
• Temperature Range: 0.0 to 60.0°C / 32.0 to 140.0°F
• Temperature Resolution: 0.1°C / 0.1°F
• Temperature Accuracy: ±0.5°C /±1°F
• Automatic Shut-Off: after 8 minutes of non-use
• Battery Type/Life: 1.5V (3) AAA / approximately 500 hours of continuous use
• Environment: 0 to 50°C (32 to 122°F); RH max 100%
• Dimensions: 150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)

• Warranty: 2 Year
• pH Range: 0.0 to 14.0 pH
• Application: Industrial
• pH Resolution: 0.1 pH
• Conductivity Range: 0.00 to 4.00 mS/cm

• Automatic Grade: Automatic, Manual
• Color: White,WHITE ND ORANGE
• Brand Name: TOPLAB INDIA PVT LTD,TOPLAB INDIA
• Design: Microprocessor bsaed
• Power Source: Electric
• Power Supply: DC 9V (AC Adaptor) Input Voltage: AC230V,50/60Hz
• Model Number: TOP-500pH
• Certification: CE Certified, ISO 9001:2008, GMP Compliant
• Feature: Accuracy, Durable, Light Weight, Low Power Comsumption, Stable Performance
• Voltage: 6-9VDC, DC 9V (AC Adaptor) Input Voltage: AC230V,50/60Hz
• Display Type: Digital
• Type: Digital Ph Meters
• Weight: 1 Kg
• Resolution: 0.1, 0.01 pH
• Warranty: 1Year
• Accuracy: ±0.01 pH
• Country of Origin: India,India
• Display: Digital LED
• Testing Range: -2.000 to 20.000 pH
• Physical Dimension: 242×195×68 mm
• Warranty: 01 year

• Material: Aluminum
• Brand: GlobeTrek
• Model: GT-LS-01
• Application: Industrial
• Length: 5 Meter

• Display Type: 3 Digit LED Display
• Brand Name: Novotech
• Type Of Ph Meter: Table-Top
• Usage/Application: Laboratory
• Ph Range: -2.000 to 20.000 pH

• Application: photometric ,pH measurements.

electronic liquid level indicators, automatic water level controllers

digital measuring diameter instruments

vibration measurement equipments, sound measurement equipments, HUMIDITY

We are offering hour meter.

Air Pollution Monitoring

Water Level Indicator, wireless cctv camera, pump controllers

Ph Meters, Water Softener, Cartridge Filters, Conductivity Meters