Measuring Instruments Dealers in Kharghar, Navi Mumbai

• EC Range: 0.00 to 19.99 mS/cm
• EC Resolution: 0.01mS
• EC Accuracy: ±2% F.S.
• EC Calibration: Manual, one point
• EC/TDS Temperature Compensation: Automatic, 0 to 50°C (32 to 122°F)
• Cell Type: Amperometric graphite
• EC/TDS Probe: Amperometric graphite electrode
• Battery Type/Life: 4 x 1.5V alkaline / approximately 200 hours of continuous use
• Environment: 0 to 50°C (32 to 122°F); RH max 95%
• Dimensions: 175 x 41 x 23 mm (6.9 x 1.6 x 0.9’’)
• Weight: 95 g (3.4 oz.)
• Ordering Information: HI 98304P (DiST®3) is supplied with protective cap, screwdriver, batteries and instructions

• temperature: -0

Standard Industrial pH Electrode Configuration:- Model:-REF-200, Working pressure: 0.4MPa (Even high pressure is option)Cable length: 5 meter with BNC header Glass electrdoe, NYLON jacket. HIGH PERFORMANCE pH Electrodes Configuration:- Model:- REF-300, Working pressure: 0.6MPa (Even high pressure is option), Cable length: 5 meter with BNC header (VP header is optional)Glass electrdoe, PPS jacketLiquid ground pole: Available. Can be used in dual high-impedance differential amplifier, improve anti interference, improve response speed.

• Size: φ 40mm x 185mm
• Brand Name: TOPLAB INDIA PVT LTD,TOPLAB INDIA
• Driven Type: Battery
• Meter Type: Hand-Held
• Color: White and Blue,White and Blue
• Certification: CE Certified
• Display Type: Digital
• Type: Ph Testers
• Accuracy: 0.02pH / 1°C
• Weight: 88g
• Country of Origin: India
• Measuring Range: 0 to 14pH
• Resolution: 0.01pH / 0.01°C
• pH Calibration: Three Point (4.01pH, 6.86pH, 9.18pH)
• pH Electrode: Built-in Electrode (Replaceable)
• Warranty: 06 months
• Warranty: 06 months

• Application: Industrial
• DO Range: 0.00 to 90.00 ppm (mg/L); 0.0 to 600.0 % saturation
• DO Resolution: 0.01 ppm (mg/L); 0.1% saturation
• Temperature Range: -20.0 to 120.0 Deg C; -4.0 to 248 Deg F; 253.15 to 393.15 K
• Temperature Resolution: 1 mm Hg

• Application: photometric ,pH measurements.

Float and Board Level Indicator is commonly used for the measurement of liquid level in over ground or overhead storage tanks. We are enlisted among the leading Manufacturers and Suppliers of Float and Board Level Indicators in Mumbai, Maharashtra. Our Float and Board Level Indicator is known for its superior strength and durability. The reason behind this is that we use only high grade material in the manufacturing of Float and Board Level Indicator.

• Type: Ph Meter
• Certification: CE Certified, ISO 9001:2008
• Feature: Accuracy, Durable, Light Weight, Stable Performance
• Voltage: 2 CR2032 Batteries
• Display Type: Digital
• Automatic Grade: Automatic
• Power Source: Battery
• Resolution: 0.01pH
• Brand Name: Peak Instrument
• Item: Pentype PH Meter
• Resolution: 0.01pH
• Measuring Range: -1.00
• Calibration: 1, 2, 3 point

Reflex level gauges applicable upto 200 kgcm2 and upto 400 deg cent cryo applications upto-196 deg cent toughened borosilicate glass with swerrations for applicability in critical, acidic, cryo and temperature zone ibr certified device available nace,h2s service compatibility applicable.

• Material: Metal
• Application: For Liquid Measuring
• Color: Blue, Grey, Orange, Shiny-silver, Silver
• Condition: New
• Frequency: 0-25Ghz, 25-50Ghz
• Beam Angle: 0-5 Deg, 5-10 Deg
• Country of Origin: India
• Process Pressure: 0-0.5Mpa.0.5-1Mpa
• Range: 0-30Mtr
• Signal output: 0-20mA

10mm (0.4”) LCD Display   Auto Manual Shutdown   Low Battery indicator   DC Output : 0 ~ 1.3V 10mV/db   ‘A’, ‘C’ or ‘Flat’ Weighing with Slow / Fast response   94db in full Callibration at (1KHz)   Optional RS-232 Communication (Advances Software Program for all Windows) Alarm Volume o/p : 30 ~ 130db Alarm o/p : LED Optional Relay Output   Backlight

• Type: online monitoring system

We are the main supplier of this product.

• Measuring Range: 0 - 20000 Lux
• Resolution: 0.1 Lux
• Usage/Application: Laboratory
• Accuracy: +/- 0.4 %
• Display: LCD Type
• Pack Type: Box

• Display Type: 3 Digit LED Display
• Brand Name: Novotech
• Type Of Ph Meter: Table-Top
• Usage/Application: Laboratory
• Ph Range: -2.000 to 20.000 pH

Lux Meter is a device that is widely used for checking the intensity of the visible light during inspection. Our Lux Meter is appreciated for providing accurate measurements of brightness. Lux Meter that we offer is known for its small size, portability and light weight. Clients can avail bulk quantities of our Lux Meter at competitive rates from us.

• Brand Name: BSK
• Temperature Range: -5 to 95°C (23 to 203ºC)
• DIMENSION: Standard
• Measuring Range: 0 to 14 pH; 0 to +1000 mV or ±1000 mV
• Sensitivity: 0.002 pH; 0.2 mV
• Stability: 0.02 pH; 2 mV (per 24 hours, non-cumu-lative)
• Temperature Compensation: Pt100 or Pt1000 RTD
• Sensor Cable: 6 conductor plus 2 shields, HDPE Jacket
• Pressure Range: 0 to 100 psig
• Max. Flow Rate: 10 feet (3 meters) per second
• Max. Sensor to Analyzer Distance: 3000 feet (914 meters)
• Sensor Body Options: 1" NPT convertible 1W" insertion 1Q" or 2" sanitary-style

• Operating Temperature: 15
• Meter Dimensions (mm): 165 (L) x 190 (D) x 60 (H)

CpH -102, an advanced Bench top pH Meter is the perfect combination of the state of the art electronic design coupled with advanced software & reliable electro chemical sensor higher uses a combination plastic pH electrode with inbuilt temperature sensor for the simultaneous measurements of pH & temperature & automatic temperature correction. CpH-103, a higher end bench pH Meter incorporates a glass electrode & seperate temperature sensor for high accuracy pH measurement & automatic temperature compansation.

We are involved in offering a wide range of Measuring Instruments, which is developed in line with industry norms and guidelines. The raw inputs used in the production of these instruments are sourced from leading and certified vendors of the market after rigorously examinations of quality and flawlessness.

Holiday detectors are employed in the non-destructive detection and location of pinholes, holidays, bare spots or thin points in protective coatings applied for corrosion protection over metal or concrete.

• Application: Industrial
• Brand Name: Testo
• Battery Type: 9v battery
• Weight: 300 g
• Working Temperature: +5 to +45 C
• Measuring Range: -300 to +300 hPa

DESCRIPTION - The rapid moisture meter consists of an aluminium body fitted gauge at one end and a sealing cup at the other end held to the body by U-clamp and a clamp screw with an 'O' ring between the body and the cup. The cup can be removed from the body, by just unscrewing the clamp screw, by swinging the U-clamp to the side. The gauge is calibrated percentage of moisture content the wet weight basis. A balance is mounted on a base which is fixed in the carrying case and bring into position when required. When the catch to the left of it is moved back and the base is rotated about the swivel pin. When the balance base is set horizontal the same catch engages to keep it in that position. The balance arm is preloaded to indicate the level ( coincides with index mark when the correct weight 6 gms ) of sample is placed in the pan. Calcium carbide (reagent). Scoop for measuring reagent. Cleaning brush. Steel balls (for cohesive soils), three balls of about 10 mm diameter and one of 20 mm diameter.

• Range: -0.01 sec. to 99.99 sec

New CT series adopts RS 485 communication function so that each parameter setting and monitoring can be available from PC. In addition, it allows up to 6 digit prescale setting possible to provide user convenience. Increased contact capacity of load to 5A and new design nameplate are another features of NEW CT series. ( ※ NOTE that existing CT series will be discontinued. )

• Display: DIGITAL
• Country of Origin: Made in India
• Model Name/Number: LUX-101-IS
• Measuring Range: upto 1,00,000 Lux
• Brand Name: MAGNAFIELD ELECTRONICS AND ENGG
• Resolution: 1 Lux
• Accuracy: 4%
• Warranty: 1 YEAR AGAINST ANY MANUFACTURING DEFECT
• Accessories: with Carry case
• Low Battery Indication: Yes

• * Measuring Range: Refractive Index nD
• Brix: 0 to 95%
• Brix-TC: 0 to 95%
• * Accuracy: Refractive Index nD
• Brix: +/-0.1%
• * Range of temperature display: 0 to 50°C
• * Range of temperature for correction of Brix value: 15 to 45°C
• * Power Supply: 220 V +/-10%, 50Hz
• * Dimension: 330x180x380mm
• * Weight: 10 kg

• Feature: Operates on electrical power/battery., * Storage facility for 100 data.

Contech digital force measuring guage is a device used for measuring axial force. This can be used as handheld instrument or attached to a testing bench.

• Range of temperature display: 0 to 50°
• Power Supply: 220 V +/-10%, 50Hz
• Weight: 10 kg
• Dimension: 330x180x380mm

Abbe refractometer, Abbe Refractometers measure the refractive index (nD) of transparent, translucent liquids and solid substances. It is also used to measure percentage of solids (brix) of sugar solutions as well as temperature compensated brix values.

• pH Range: 0-14 pH
• Temp Range: -5° to 135° C
• Pressure: 300 psi @ 25°C
• Bulb Glass Type: HT-3 / High Temperature / Low Na Ion Error
• Cable Length: 6 Ft
• Make: Broadley James , USA 

vibration measurement equipments, sound measurement equipments, HUMIDITY

• Light source: Infrared LED
• Wave length: 589.44nm
• Modulator: Faraday magneto optical modular
• Optical Rotation: -45°
• International Sugar Scale: -120°
• Optical Rotation: ±( 0.001° + measuring value x 0.05%)
• International Sugar Scale: ±(0.03° Z+ measuring value x 0.05%Z)
• Minimum transmittance of sample: 1%

Polarimeter is an instrument used for determining optical rotation of substances. It is also used for measuring specific rotation, concentration & international sugar scale of optically active substances. Polarimeter is ideal for pharmaceutical, food and beverages, sugar, cosmetics, oil refinery, chemical industries & also scientific research studies. CONTECH Digital Polarimeter is a fully automatic instrument and eliminates the need for manual adjustments thus offering a high degree of measurement precision. The polarized light after passing through the sample falling on the analyzer deviates from the optical zero position to the extent of optical rotation of the sample and the photomultiplier detector will produce an electrical signal with the frequency corresponding to the optical rotation of the sample. This signal after passing through the selective frequency circuit and power amplifier drives the servo-motor & in turn the analyzer until the optical zero position is regained. The analyzer rotation is measured by an encoder and is displayed on the digital readout as the optical rotation of the sample.   DIGITAL POLARIMETER CDP - 001 Manufacturer Supplier and Exporters * Measures optical rotation, specific rotation, concentration and sugar content. * Based on Optical Null principle. * Multiple readings and calculation of average value and standard deviation. * Measurement of dark samples upto 1% transmittance due to adjustment of high voltage supply to the detector in accordance with the darkness of sample.* RS-232 interface. * Large backlite LCD display. * Various types of sample tubes, Sample tube length : 100 mm or 200 mm* Software for computer interface (Optional)

• Brand Name: Tracer
• Model Number: LEMS-TR-MT
• Weight: 800 gram
• Operating Voltage: 12V, 5000mA Battery with external charger
• Battery Backup Time: 30Days ( interval time 1Hr)
• Power Consumption: 12V Max 100mA /Average 10mA
• Environmental Temperature: -40 to +70 degree C
• Housing: Plastic ABS enclosure
• Battery Charger Size: 160x80x85 mm
• Battery Charger Weight: 1000 gram
• SIM Card: Supporting 3V SIM Card
• Digital Input: 4 digital inputs
• Minimum Order Quantity: 5 Piece