Measuring Instruments Dealers in Ttc Industrial Area, Navi Mumbai

• Feature: Advanced Teflon Diaphragm Design Built In Temperature Sensor Sealed Double Junction Reference. Etc

Measurement accuracy for ph depends on quality and specification of the instruments you use. We have variety of industrial electrodes that are used in process industries for monitoring and control of ph. These electrodes have compact design with single chamber weatherproof case for insertion or flow through installation.

• Power Supply: 220 V,50 Hz AC Single Phase
• Motor: 1/2 HP 3 Phase 220V AC

High speed with a capacity of counting up to 1500 - 2000 labels per minute 7 inches HMI provided for control panel Ability to count pre-determined label quantity Print out facility to maintain records of exact counted labels Compliance with cGMP Compact and sturdy structure Simple controls for ease of operation

• Working Width: 250 mm (also available in 330 mm & 400 mm)
• Floor Space 250 mm: 9.5 ft. x 4ft.
• Working Speed: 175 Mts. Per/ min

Label Inspection and Slitting & Rewinding machines is designed to slit, count and if missing label found the machine will stop automatically at the splicing table. The machine is suitable for label industries. The Machine has Servo technology Motors electronic control of speed, position and torque. Electronic Web Guide with ultrasonic sensor. Friendly user Coloured Touch Screen for easy to use working programs

In Electrical System, sometime without identification of Phase Sequence it is impossible to proceed further. The Phase Sequence Indicator is used to determine the Phase Sequence R, Y & B of 3 Phase Voltage. It is important that Phase Sequence is known properly prior to energizing electrical motor & other equipment, as incorrect connection could cause damage to the equipment. The correct operation of measuring instrument like 3 Phase Energy Meter, 3 Phase Power Meter and Automatic Control of devices also depend on the Phase Sequence.

The Radix Flow Rate Indicator-Totaliser(Totalizer) models FLT601 and FLT401 accept signals from analog flow meters and display flow rates and volumes on a high visibility LED display. These Flow Rate Totalisers accept a 4~20mA input, and have 4 relays. Also provided are a 4~20mA output for retransmission, and an RS485 communication port with MODBUSRTU. FLT601 has a 6-digit flow rate indicator and an 8-digit flow totaliser display. The FLT401 has a 4-digit and 6-digit display. The FLT Series of Flow Rate Indicator-Totalizers are used for flow monitoring and control, process monitoring and display, as well as voltage and current monitoring and display. The non-volatile memory with indefinite retention does not require batteries. Radix Flow rate indicator-totaliser(Totalizer) model have facilities of communication to connect to PLC DCS SCADA, relay output based of Flowrate or totaliser, totaliser reset, retransmission of flowrate signal to other devices. Flow totalisers totalizers accept signal from various types of flowmeters like electromagnetic, differential pressure transmitter on orifice plate , ultrasonic, turbine type etc. Radix flow rate indicator-totaliser(Totalizer) are mostly used in Process and Chemical industries, Water treatment plant's distribution system, effluent treatment plants etc.

• Weight: 30kg
• Usage/Application: Industrial
• Light Source: Infrared Led
• Dimensions: 600mmx320mmx240mm
• Wave Length: 589.44nm
• Modulator: Faraday magneto optical modular
• Optical Rotation: -450 - +450 degree
• International Sugar Scale: -1200 -+1200 degree
• Accuracy Optical Rotation: +/-( 0.010+ measuring value x 0.05%)
• International Sugar Scale: +/-(0.030 Z+ measuring value x 0.05%Z)
• Minimum transmittance of sample: 1 %
• Power Supply: 1% 230V, +10% AC, 50/60 Hz

• Power: 220V
• Display Type: DIGITAL
• Brand: HIMAX
• Measuring Range: 0.1NM TO 9.80NM
• Usage/Application: Industrial
• Model Name/Number: RT10 RT100

• Feature: 3½ Digit 17mm LCD Display,Single Person Push Button Operation Etc.

Ideal for Insulation Resistance Measurement of Electrical Equipment (Motors, Transformers, Machines, etc), Electrical Cables for Distribution Networks, Cables for Commuinication Networks, House Hold Appliances (Washing Machines, Mixer, Toaster, etc), Industrial, Commercial & Resisdential Installations.

When air is cooled, the temp at which condensation takes place is termed the Dew Point (DP). A simple method of determining the DP is to cool the air around a highly polished surface and cooling it. When the DP is reached, condensation on this surface makes it cloudy and the temp observed at this point is the DP. In our Dew Point Measurement System, cooling is done by dry ice ( solid CO2) in a polished tube and temp is measured by a Digital Temp Indicator. This system can be used whenever periodic checking of dew point is required.

Kl4000 series is a hybrid recorders realize simple and easy operation as analog recorders. Not only can each measured value be read from the custom made analog scale plate which incorporates input type and measurement value input, but a comprehensive led display also enables precise digital measurements to be taken by the user.

We are offering digital insulation tester. Models dit 99a ranges 0 - 20 m ohms testing voltage dc 100 v resolution 0.01 m ohms models dit 99b ranges 0 - 200 m ohms testing voltage dc 250 v resolution 0.1 m ohms models dit 99c ranges 0 - 200 m ohms testing voltage dc 500 v resolution 0.1 m ohms models dit 99d ranges 0 - 200 m ohms testing voltage dc 1000 v resolution 0.1 m ohms models dit 99e ranges 0 - 2000 m ohms testing voltage dc 1000 v resolution 1 m ohms.

• Chart Size: 120 mm Fanfold Chart PAper
• Chart Speed: FIxed ( 20 mm, 60 mm, 120 mm / Hr. Up To 1200 mm/Hr.

Strip chart recorder Highly Precise & Accurate Synchronous Stepper Motor For Chart, One Or Two Pen Continuous Line.Stripcharts Writing Width 120 mm, Easily Replaceable Fibretip Disposable Pens.

Eliminating the filar eyepiece reduces operator fatigue and delivers improved repeatability. Easy-to-use Windows® software provides you with advanced measurement and analysis tools.

• Type: Pocket pH Meter
• Application: Industrial
• Feature: High Accuracy
• Power Source: Battery

Main Features: ● Mini and ultra-thin design with size 180×50×20mm. 10mm diameter electrode can be used to test pH value in tubes. ● Automatic calibration, automatic switch off, low voltage alarm and electrode failure warning.   ● IP57 waterproof and easy-to-read LCD screen, replaceable electrode. There are calibration solution, electrode soak solution and backup batteries. Specifications:  Model                                              : P-310 Measuring Range                           :  -1.00 ~ 15.00 pH Resolution                                       : 0.01pH Accuracy                                         : ±0.2pH Temperature Compensation            : 0 ~ 60℃ Calibration                                       : 1, 2, 3 point   IP Rating                                          : IP57

• Features: High accuracy , Long lasting , Reliability
• Item Code: VFA-VFB

electrical measuring instruments, Led Fluorescent Lights

• Application: Laboratory
• Feature: Precise Digital LCD Readout,Durable Silicon Rubber Keypad .

We Offer Low Flow Rotameter. It is an instrument used to measure instant flow rate of Liquids and Gases and are commonly used for purging or low flow measurement.

• Material: Glass
• Shape: Rectangular
• Certification: ISO Certified
• Application: Lab Use, Medical Use
• Color: Gray
• Feature: Easy To Use, Light Weight
• Temperature Range: 10-50C
• Meter Type: Digital, Thermometer
• Brand Name: Spantech
• Country of Origin: India

right control & instrument is the one name, which is look up by the client with the trust to access the effectual working dew point transmitters. we are providing dew point transmitters in unique designs in the adherence of clients’ needs in the market of uk. range : adht ex – dew point transmittermodel amt – dew point transmitter features : 3 wire, 24v, 4-20ma dew point transmitterintrinsically safe - cenelec eexia iic t6, atex ii 1gvarious ranges : overall range -110ºc to +20ºc dew pointaccuracy ±2ºc dew pointweatherproof rating ip65openshort circuit detectionbuilt-in temperature compensationsupplied with calibration certificate traceable to national & international humidity standardsunit is fully self contained in a robust casing with weatherproof protection to ip65ideal for use in heavy industrial environments click here for more information.

Microprocessor based pocket type Moisture meter with LCD display and rugged housing so that the pins on the end of the instrument can be pressed into the material to be measured .

We are offering ph meter accu ph 3. Instruments for single parameters : ph, conductivity tds & do all these instruments are compact table top units using advanced microcontroller, graphic lcd & rs 232 c interface for pc. They also have manual & auto data logging facility with large memory. Operate on mains as well as on battery.

We are manufacturing wooden boxes, wooden trays, wooden pizza bat, wooden chopping board and all type of measuring tools and instrument etc.

• Model: AM-PH-01
• Resolution: 0.1 pH
• Power: 3V x 2 Lithium Batteries CR2032
• Dimension: 33.5 mm x 170 mm
• Weight: 85g
• I Deal In: New Only
• Range: 0 to 14
• Accuracy: +/- 1% FS
• Meter Type: Digital
• Display: Large LCD display for reading convenience
• Packing: portable pouch
•  :  

• Material: Stainless Steel 303
• Weight (g): 300

MS moisture sensors provide fast, reliable and accurate inline detection of moisture in fluids. Technology developed for reventative maintenance programmes.

• Frequency: 50 Hz
• Brand: Nextech
• Communication: USB or RS232
• Dimension: 9.8 x 6.3 x 3.9 inches
• Accuracy: 5% of full scale
• Display Type: 4 1/2 Digit LCD Backlit Display
• Voltage: 230 V
• Jaw Diameter: 20-200 mm
• Warranty: 1 Year

We are engaged in manufacturing and supplying of Torque Tester

• Packaging Details: 100 pieces packet
• Model Number: N/A
• Tile Accessory Type: Tile Spacers
• Supply Ability: 20000 Pack/Packs per Day
• Lead Time: 15 to 20 Days
• Brand Name: N/A
• Place of Origin: Punjab, India

electronic indicator, aerospace equipment, Electronic Instrument

• Display Type: Digital
• Brand: DPM Instruments
• Features: High Functionality,Energy Efficiency,Master-Slave based clock
• Display Digit: 4 Digit
• Panel Cutout Size: 90 x 90 mm
• Dimensions: 96 x 96 x 110 mm
• Modal: CL-1000