Measuring Instruments Dealers in Turbhe, Navi Mumbai

Digit 10mm LCD Display   Ranges: H,M,L(High, Medium, Low)   Flash Adjust:Coarse adjustment, Fine adjustment X2 and ÷2 for fast Check   Triggering Mode: Interior/Exterior

• Accuracy: 0.1% for sample above 5g
• Resolution: 0.1%

contech moisture balances incorporate rapid halogen heating with emfc precision weighing technology to determine moisture content of sample quickly & effectively.   * easy & fast moisture determination. * 3 types of testing methods:- manual, time programmable, automatic. * weighing based on emfc technique * heating by infrared halogen tube heater * temperature range upto 200°c (1°c) * moisture range: 0.1% to 100% * moisture measurement: unit- % wet base, % dry base, dry weight,% dry to wet weight * display of time, temperature, weight & percentage moisture * graphical backlight lcd for displaying weight, setup parameters, testing parameters & results * rs-232 interface for connecting to a computer / printer * data storage upto 50 tests * 10 programmable memory * time based moisture loss on the graphical display. * study of pattern of moisture loss by printing/display on computer screen of online data-elapsed time, present sample weight and percentage moisture loss. Elapsed time interval can be programmed -10,20,30,60 & 120 seconds

• Model  : pH-102  
• pH-103  : pH Range  
• 0-14pH  : 0-14pH  
• pH Resolution   : 0.01pH  
• 0.001pH  : pH Accuracy   
• +0.02pH  : +0.002pH  
• Temperature compensation   : 0-100 deg C  
• 0-100 deg C  : mV  
• +2000mV  : +2000mV  
• mV Resolution  : 1mV  
• 0.1mV  : mV Accuracy  
• +2mV  : +0.2mV

Contech bottle torque tester is used for measuring the torque required to open the cap of bottles. * Operates on electrical power/battery.* RS232 serial interface for computer connection. * Capacity : 0~100Kg fcm/10 N-m * Units : Kg-cm/N-m * Bottle diameter : upto 200mm * Accuracy : + 0.5% * Over load safety.* Peak hold function.* Backlite LCD display.* Calibration facility (Optional).* Storage facility for 100 data.

• Feature: Dissolved oxygen and temperature measurement., Single and continuous print out of readings.
• Precision: DO : +1 FS Temperature : +0.4°C
• Temperature correction: Automatic 0

Dissolved Oxygen Meter incorporates membrane electrode method to measure dissolved oxygen concentration, and saturation of water solution. Polarographic type dissolved oxygen electrode offers quick response, accurate measurement, short polarization time along with features for automatic salinity and temperature compensation & air pressure correction with the help of built in air pressure sensor. DO meters are useful for aquaculture, monitoring of water resource, beverage production, sewage disposal, biological agriculture, environmental protection and scientific research.

With the assistance of our team of professionals, we are offering Rotameter. These rotameters are used to “calibrate” air sampling pumps so the concentration of airborne fibers. Offered rotameters are manufactured by making use of modern techniques and quality assured material in adherence with set universal norms. We offer these rotameters within the committed time-frame.

A dial gauge is a precision measurement commonly used to measure machined parts for production tolerances or wear. Dial gauges are capable of producing extremely fine measurement values; increments of 0.00005 inch (0.001mm) may be possible with some gauges.

• Range of temperature display: 0 to 50°
• Power Supply: 220 V +/-10%, 50Hz
• Weight: 10 kg
• Dimension: 330x180x380mm

Abbe refractometer, Abbe Refractometers measure the refractive index (nD) of transparent, translucent liquids and solid substances. It is also used to measure percentage of solids (brix) of sugar solutions as well as temperature compensated brix values.

• Range: -0.01 sec. to 99.99 sec

New CT series adopts RS 485 communication function so that each parameter setting and monitoring can be available from PC. In addition, it allows up to 6 digit prescale setting possible to provide user convenience. Increased contact capacity of load to 5A and new design nameplate are another features of NEW CT series. ( ※ NOTE that existing CT series will be discontinued. )

• Weight: 205 g (7.2 oz.)
• pH Range: 0.00 to 14.00 pH
• pH Resolution: 0.01 pH
• pH Accuracy: ±0.01 pH
• pH Temperature Compensation: Automatic
• EC Range: 0.00 to 20.00 mS/cm
• EC Resolution: 0.01 mS/cm
• EC Accuracy: ±2% F.S.
• TDS Range: 0.00 to 10.00 ppt (g/L)
• TDS Resolution: 0.01 ppt (g/L)
• TDS Accuracy: ±2% F.S.
• EC/TDS Temperature Compensation: Automatic with β adjustable from 0.0 to 2.4% / °C
• EC to TDS Conversion Factor: 0.45 to 1.00
• Temperature Range: 0.0 to 60.0°C / 32.0 to 140.0°F
• Temperature Resolution: 0.1°C / 0.1°F
• Temperature Accuracy: ±0.5°C /±1°F
• Automatic Shut-Off: After 8 minutes of non-use
• Battery Type/Life: 1.5V (3) AAA / approximately 500 hours of continuous use
• Environment: 0 to 50°C (32 to 122°F); RH max 100%
• Dimensions: 150 x 80 x 36 mm (5.9 x 3.1 x 1.4’’)

• Type: Moisture Meter
• Application: Moisture Measurement
• Weight: 3.5kg

Cou-Lo Aquamax KF moisture meters have been specifically designed for the determination of water content. Combining coulometry with the Karl Fischer method, Aquamax KF titrators determine the water content of samples by measuring the amount of electrolysis current necessary to produce the required iodine – this is an absolute technique which does not require the calibration of reagents.   Aquamax KF titrators have been developed in response to many suggestions and comments from our customers in routine laboratories, off-shore platforms and in the field. The built-in battery and optional carry case provide the versatility required by the laboratory and also the ease of use and portability required by the field engineer. Key Features: • Simple operation • 10 user programmable methods • 1ppm / 100% • Results in ppm, mg/kg, % & μg water • Multi language display & print out • Small footprint • Integral high speed printer • Fully portable   • Low drift cell design

These instruments are manufactured precisely for achieving better accuracy. Each and every instruments is individually crafted. Borosilicate glass tubes are ground & polished to a high precision internal taper. A float is prepared using anodized aluminium. The tube is then calibrated, using a standard precision master. Markings are made on the glass surface, becoming permanent in the processes of annealing in an electric furnace. The markings on the tubes are then re-checked using another standard master. Besides providing calibrated meter tubes, the instrument set is also provided in an elegant, anodized aluminium/powder-coated frame.

• Type: online monitoring system

We are the main supplier of this product.

• Model Number: HI931101
• Application: Industrial
• Dimensions: 185 x 72 x 36 mm (7.3 x 2.8 x 1.4 Inch)
• Weight: 300 g (10.6 oz.)
• Warranty: 2 Years (Probe 6 Months
• Temperature Range: -20.0 to 120.0 Deg C (-4.0 to 248.0 Deg F)
• Battery Life: 1.5V AAA (3) / approx. 200 hours of continuous use
• Environment: 0 to 50 Deg C (32 to 122 Deg F); RH max 100%

Float and Board Level Indicator is commonly used for the measurement of liquid level in over ground or overhead storage tanks. We are enlisted among the leading Manufacturers and Suppliers of Float and Board Level Indicators in Mumbai, Maharashtra. Our Float and Board Level Indicator is known for its superior strength and durability. The reason behind this is that we use only high grade material in the manufacturing of Float and Board Level Indicator.

• Brand Name: Extech
• Accuracy: 0.05% rdg +1 digit

Quickly measure RPM, surface speed and length with one tool. Use the contact wheel for up-close readings or laser mode for safer, non-contact measurements up to 1.6ft (0.5m) away