Mortar Dealers in Navi Mumbai

• Brand Name: Homesure
• Country of Origin: India
• SKUs: 40kg
• Consistency: 20 – 30 %
• Pot Life: > 30 minutes
• Setting Time: 30 - 600 Minutes
• Density: 1.5 to 1.8 g/ml

Features: Increasing overall masonry strength & load-bearing capacity Providing high compressive & flexural strength Superior adhesive strength Higher durability Strong bond between the blocks   Benefits & Advantages: Easy to apply & gives better levelling Zero Wastage No Shrinkage Cracks No Curing Required Save Time Cost-Effective

• Application: Construction Use
• Packaging Size: 20 Kg,50 Kg
• Type: Polymer Mortar
• Country of Origin: India
• Brand Name: Silico Bond
• Shelf Life: 1 Year if Stored in a Sealed Container
• Note: Depending On the Porosity and the Type of Substrate
• Manufactured By: Precise Conchem Pvt. Ltd.

silicobond is a modified polymer emulsion specifically designed for cement based applications   advantages: excellent bonding: the bonding strength between old concrete & fresh mortar will be distinctively improved. excellent adhesion to concrete, masonry, brick, wood, metals etc. higher strengths:flexural & impact strength is increased compared to the unmodified mix lower. permeability:water absorptions is reduced, therefore providing excellent water proofing capabilities. better resistance: increases resistance to industrial chemicals. uv light and heat as well as improved abrasion resistance. lower shrinkage:modified mortar is plasticised considerably. mortars with low water, cement ratio can be achieved without affecting workability and therefore. enhanced curing: the modified mortar has better water retention capability and holds the mix water in mortar for enhanced curing. improves surface hardening: limits wear & dust production of concrete. safe to use:being water-based it is eco-friendly in nature & is easy to handle.   uses: bonding coat:as a bonding coat between old concrete & new mortar/concrete. passivating coat:anti corrosive /passivative treatment to reinforcement and concrete surface. concrete repair & adhesive mortar by polymer modified mortar: for repairing spalled concrete floors, beams, columns, slabs, foundations. wear resistant mortars for floors: abrasion resistant, crack resistant polymer mortars on industrial repairing floors & stairs: as a patch-up polymer mortar for filling up voids, loose pockets, spalled edges etc. crack sealing: can be used as a crack filling compound by mixing with cement and cement injection mixing for grouting purposes. renderings & coatings: cement based renderings especially in tanks, water treatment plants, etc. for improving the water impermeability also for renderings on foundation.   application guidelines: surface preparation: the concrete surfaces and the reinforcing steel should be clean,free from dust,dirt,loose particles, grease oil etc. when repairing, the base concrete must be sound and firm. preparation of bonding coat: the prepared bases, such as concrete, bricks, stones etc. should coat consisting of one part silicobond to two part portland cement, mixed homogenously. preparation of polymer modified mortar: to prepare silicobond modified cement mortar, premix thoroughly solid components viz, portland cement, sand in required proposition pour silicobond at a ratio of 20% of cement weight with required quantity of water to mixture, and mix thoroughly for about 3 to 4 minutes. finally add the water little by little, until the required consistency achieved.