Motor Drives Dealers in Navi Mumbai

Stepper Motor Drives

We are a prominent name offering quality-centralized array of products that are the perfect outcome of premium raw material and modern work methods. Also, we source the material from the reliable places only. Each consignment of ours is packaged carefully utilizing premium packaging supplies and technologies in order to maintain the products' environment and quality during shipping and handling.

GoGoA1 BLDC High Efficient Hub Motor kit Mechanical Parameters  Position:  Rear  Number of  Holes: 36  Cable Length: ~1ft  Cable Diameter: 6sqmm  Applications: Electric Bicycle/Ebike    Electrical Parameters  Rated Voltage(DCV): 48V  Rated Power :250W  Peak Power: 500W  Continuous Current: ~7.3A  Load Current: ~15.7A  no(rpm) 404  Regenerative: Yes  Max Torque: 60NM    Controller Specifications  GoGoA1 48V 23A 450W controller   Output Power: 350W    Operating  Voltage: 36/48V  Operating Current: 15A    How To Fit The Conversion Kit?  Motor – it depends on the type of wheel. It is easy to fit the Magnesium wheel hub– all you need is to replace your back wheel with the magnesium hub motor wheel. For fitting spoke wheels bicycle with the hub motor, you have to remove spokes from the wheel, place the motor and then put the spokes back. Controller and Battery box placing fully depends on your personal preferences.   

Output frequency 0.5-240 OHz Analog Setting(DCO-10V) and (DC4-20mA) Automatic Voltage compensation and slim compensation PWM frequency 1.5- 16KHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz Output frequency 0.5-240 OHz

• Input Phase: Single Phase
• Input Voltage: 230- 240 V
• Frequency: 50 Hz
• Automation Grade: Automatic
• Packaging Type: Box
• FEATURES: Energy Savings. Utility Company Rebates. Lower Cost. Smooth Start-Up. VFD allows precise pressure control and reduced noise level.

A1000 AC DRIVE Technical Specifications: Product Range: 0.55 to 355 kW. Output Frequency range: 0.01 to 400 Hz. Input Voltage: 380-480 VAC, -15 % to + 10 % Starting Torque: Upto 200 % for 60 Secs Control Method: V/f Control, V/f Control with PG, Open Loop Vector Control,Closed Loop Vector Control with PG, Vector Control for PM, Advanced Open Loop Vector Control for PM, Closed Loop Vector Control for PM. Special Features: Braking Transistor Built In till 30 K.W. Working Ambient Temperature: -10 to 50 deg C. without derating. Last Ten Fault History for easy Troubleshooting. Instant Setup of New drives using stored Backup. Swing PWM function to decrease noise at low carrier frequencies. USB Connectivity & Modbus RS485/422 onboard

    FEATURES * Advanced hybrid design incorporating logic & analog circuits* Compact robust construction with copper bus-bars* Bulkhead mounting for easy installation* Self synchronizing* Isolated heat sink* shrouded electronics meeting CE norms for added safety* Field adjustable current limit & current trip* Phase angle control* Field adjustable soft start* Semi-conductor fuse* Line to load regulation* High to load rated SCR's* Configurable inputs* Standard models & customization* Comprehensive operating*  installation & trouble shooting manual*       APPLICATIONS * Smooth control of complex heaters such as:*  Molybdenum disilicide*  Tungsten*  Silicon carbide*  Quartz Lamps*  Infra-red heaters & all types of heating systems* Ovens*  Kilns*  Autoclaves*  Furnaces*  Lighting* Considerable savings in electrical consumption   DESCRIPTION HG 2003/ 1 is a fully synchronised, true three phase angle thyristor power controller for 3 wire or 4 wire resistive, transformer coupled resistive & inductive loads. The output through 3 pairs of SCR''S in inverse parallel mode gives synchronised full wave control over all the three phases. The drive accommodates all feathers like soft start, current limit & over current limit as a standard features. It is built to work in harsh industrial environment. It gives very smooth control at the set value of a PID Controller with a 0 shoot up and shoot down which saves at least 5 to 10% of energy. This unit is well suited for Ovens, Kilns, Furnaces, Plastic Injection Moulding Machines & Many More where smooth control at set value is required. As this unit is vigorously tested in our own Furnaces, it can be used blindly on any equipment.

• Frequency: 600 Hz to 1000 hz.
• Input Voltage: 230 vac
• Input Phase: 1 - Phase
• Output Power: upto 15 kw
• Motor Power: 0.8 kw to 12 Kw
• Brand: Frecon

HG 2003/ 1 is a fully synchronised, true three phase angle thyristor power controller for 3 wire or 4 wire resistive, transformer coupled resistive & inductive loads. The output through 3 pairs of SCR''S in inverse parallel mode gives synchronised full wave control over all the three phases. The drive accommodates all feathers like soft start, current limit & over current limit as a standard features. It is built to work in harsh industrial environment. It gives very smooth control at the set value of a PID Controller with a 0 shoot up and shoot down which saves at least 5 to 10% of energy. This unit is well suited for Ovens, Kilns, Furnaces, Plastic Injection Moulding Machines & Many More where smooth control at set value is required. As this unit is vigorously tested in our own Furnaces, it can be used blindly on any equipment.   * Advanced hybrid design incorporating logic & analog circuits* Compact robust construction with copper bus-bars* Bulkhead mounting for easy installation* Self synchronizing* Isolated heat sink* shrouded electronics meeting CE norms for added safety* Field adjustable current limit & current trip* Phase angle control* Field adjustable soft start* Semi-conductor fuse* Line to load regulation* High to load rated SCR's* Configurable inputs* Standard models & customization* Comprehensive operating*  installation & trouble shooting manual*    

We are offering ac/dc drives. We offer a wide range of drives that improve the way our customers efficiently use energy and optimize process control. Our offering includes low voltage ac and dc drives and medium voltage ac drives. They are used across all industries and applications acdc drives, servo systems, soft starters, and packaged drives oem brands available abb, emerson, kirloskar, siemens etc.

• Input Phase: Single Phase & Three Phase
• Brand Name: CG Emotron
• Output Type: Single
• Input Frequency: 50 Hz
• Motor Power (kW): 1 - 3000 kW
• Output Power: 1-20 HP, 0.75-15 kW
• Input Supply Voltage: 380-480 VAC
• Motor RPM: 2880 RPM, 1440 RPM

High Frequency Inverter, educational trainer kit, cfl chokes, Lab Equipments

We are engaged in providing highly efficient Variable Frequency Drives of all major brands. We offer variable frequency AC as well as DC drives as per customer’s requirement. We provide Variable Frequency Drives in heavy duty or normal duty as per the application needs. The Variable Frequency Drives, offered by us, are applied in ventilation system, power elevators, factory transmission belts, steamship pumps and engines, high speed motor controls, pumps, fans and centrifuges. Range : Low Voltage range up to 560 KW High voltage range up to 7100KW Application : Ventilation system Power elevators Factory transmission belts Steamship pumps and engines High speed motor controls Pumps Fans Centrifuges  

We are providing our clients an exclusive range of AC Drives also called Variable Frequency Drive that are known for their ease of use, durability and options for wide ranging applications. The offered drives are designed as per the diverse requirements of the customers using high grade materials and sophisticated technology.

ac servo motor drive, Programmable Logic Controller, Temperature Controller

VFD, cctv, Electronic Equipment, Power converters, scada

Variable Frequency Drives, Automatic Power Factor Controller

Variable Frequency Drive, control panels board, Dc Drive, Soft Starter

Ac Drives, DC Drives, Transformers, Electric Motors, low vibration motors