OMKAR PUF INSULATION PVT.LTD. Rabale, Navi Mumbai, Maharashtra

Insulated roofing panels are made with high quality colour coated sheets of superior quality that is corrosion resistant Apart from temperature conversation and heat resistance, roof insulation material also gives helping hand to your pocket. It also saves money because every bit of loss in temperature can result into to higher energy consumption and higher expense.

The insulation of tank is done to preserve the temperature inside the tank. The tanks can be vertical or horizontal, fixed or mounted on vehicles for transportation. The ends can be parabolic dish or flat as per requirement. CO2 (carbon dioxide) tank insulation or NH3 (ammonia) tank insulation is done on a very large scale. These tanks can be of irregular shape. For void free insulation and to avoid sweating over the surfaces proper insulation is required. Proper temperature can be maintained with minimum heat loss through proper insulation. Insulation properties of polyurethane foam are much better than other insulating material hence it is preferred over other insulating materials. Cladding is done over the tanks using various surfaces such as • GI Pre coated • Aluminium • SS • FRP Thickness of insulation varies as per the ambient temperature and the internal temperature of the tank to be maintained. The density of Polyurethane foam insulation is maintained around 40kg/m3. Higher densities are also achieved as per the requirement of the customer. PIR can also be used as an insulating material. Dual insulation can also be done as per requirement of customer.   Advantages with in-situ foaming in tanks: • The risk for voids in the insulation is eliminated by the spray method • No joints in the foam • Homogeneous insulation • Increased insulation efficiency • Increased tightness • Non-corrosive and watertight cladding • Complete bonding to all surfaces • No penetration or space for accumulation of moisture • Excellent corrosion protection • Good fire fighting properties • Easy to Insulate Uneven Surfaces, Corners, Supports and Odd Geometrical Shapes  

Country of Origin : India

Material : Polyurethane Foam

Prefabricated sandwich panel with polyurethane insulation is the best solution for wall and ceiling partitions and cold rooms. Formed in place with fire retardant polyurethane using high pressure, CFC-free and use of HCFC 141B technology which results in a superior insulation and construction material. Thin walls, Fast installation • Partitions or Rooms can be dismantled and reinstalled. • Outstanding load bearing capacity, High impact resistance.

This product is fully compatible with fibre glass-laminating production methods. This PU Foam is non-abrasive and can be machined with standard high-speed steel (HSS) cutting tools. It can also be cut cleanly with water jets and traditional wood-carving tools. Our polyurethane foams are produced in a range of densities, allowing designers and engineers to best align physical properties with structural needs.

These polyurethane foams provide structural strength with moisture resistance, enabling boat designers to replace wood components with a top-quality, non-decaying product. This product is fully compatible with fibre glass-laminating production methods. This PU Foam is non-abrasive and can be machined with standard high-speed steel (HSS) cutting tools. It can also be cut cleanly with water jets and traditional wood-carving tools.

. A wide range of other optional extras is also available to provide you with the correct fit out for your operational needs. Dual compartments and shelving for example, can be configured to suit your load requirements, including height adjustable, folding and removable options. Pallet slides, compartment divisions and PVC curtains are other key areas that we can tailor to suit your needs.

The internal lining has been created by bonding a layer of insulating foam to a layer of high specification plywood and then adding a layer of fiberglass. This gives a strong inner surface, being easy to clean; it is also extremely durable and therefore can still look good for many years. So that our insulated conversions can withstand the constant loading and unloading process involved in daily distribution operations, we have developed a very strong insulated floor, with special insulated wheel boxes which are able to reduce the ingress of heat. OPI can be relied upon to insulate and refrigerate your van so you can transport your goods in a safe and true temperature-controlled environmen

. The door edges are constructed from resistant heavy gauge aluminium profiles. The door leaf panels are injected with high pressure polyurethane, leaf thickness upto 150mm, stainless steel finishes are available. The perfect insulation and sealing of the doors prevents the formation of ice and helps to constantly save energy. All doors have a smooth metal surface which can be easily and hygienically cleaned.

Features : Durable, Void Free Insulation, Dimensionally Stable, No Thermal Bridges, Fire Resistant

Thickness : 15mm And Above

Density : 36Kg/M3 And Above

Application : Under Deck Roof, Walls And Flooring Of Cold Stores And Refregerated Ware Housing

Foam emerged as a material with extremely effective thermal insulation qualities and high strength to weight ratio at low temperatures. These inherent physical characteristic enable it to perform extremely well with other alternatives products Rigid insulation, above 90% closed cells, remains durable for years, no thermal bridges, high mechanical strength, maintains insulation effectively. FEATURES ADVANTAGES: • Superior Insulating Effeciency Leading To Energy Savings • Durable • Void Free Insulation • Water And Moisture Resistant

Polyurethane foams are specially formulated to meet the physical property demands of FRP-composite boat builders. These polyurethane foams provide structural strength with moisture resistance, enabling boat designers to replace wood components with a top-quality, non-decaying product. This product is fully compatible with fibre glass-laminating production methods. This PU Foam is non-abrasive and can be machined with standard high-speed steel (HSS) cutting tools. It can also be cut cleanly with water jets and traditional wood-carving tools. Our polyurethane foams are produced in a range of densities, allowing designers and engineers to best align physical properties with structural needs. Our scarce natural energy resources have compelled us to save energy. By using PU Foam, the overall weight of the boat is reduced which helps in increasing the fuel efficiency. We offer our clients with the high quality Puf sheets which are very useful for their thermal insulation purposes. Due to the good quality of insulation the ice stored in the ice box does not melt for longer duration resulting in the longer durability and the freshness retained by the fish stored in fish holes.   ADVANTAGES: • Grain-free material • Closed-cell polyurethane foam • Will not absorb liquid water, and is largely unaffected by solvents and paints • Fiber glass laminating resins bond readily to PU Foam   PRODUCT DETAILS • Standard Size- 8 Ft X 4 Ft And 1 Mtr X ½ Mtr. • Thickness – 2”, 3”, 4”, 5” • Density- 40kg/M3 And Above • Temperature Range - -40 Deg To +100 Deg   We also manufacture High Density PUF Blocks which can be used as Stringers instead of wooden blocks to reduce the weight of the boat.   ADVANTAGES • Reduction in weight increases fuel efficiency • Labour work can be reduced as they are easy to machine and handle.

These inherent physical characteristic enable it to perform extremely well with other alternatives products Rigid insulation, above 90% closed cells, remains durable for years, no thermal bridges, high mechanical strength, maintains insulation effectively.

Thickness : 25mm and above.

Polyurethane foam is one of the major components of pre-insulated pipe supports manufactured at OPIPL. Polyurethane is different from most plastic materials in that it can be tailored to meet various load requirements of varying applications. Old techniques of wooden pipe support for the erection of plant & pipe lines are now replaced by Puf Pipe Support. OPIPL offers a wide range of Puf Supports. Normally the density range of Puf Support is 100 kgm3 to 350 kgm3. But OPIPL also offers the density from 100 kgm3 to 500 kgm3 OPIPL offers the Puf Saddles as per requirement of clients in terms of design

Finishing : Non Polished, Polished

Color : Black, Dark Brown, Grey, White

Application : Constructional

Grade : AISI, ASTM, BS, DIN

Thickness : 25mm And Above

Features : Void free insulation, Durable, Water and moisture resistant, Dimensionally stable, Fire resistant

Prefabricated sandwich panel with polyurethane insulation is the best solution for wall and ceiling partitions and cold rooms. Formed in place with fire retardant polyurethane using high pressure, CFC-free and use of HCFC 141B technology which results in a superior insulation and construction material. These sandwich panels are design for a fast and easy assembly. OPIPL Sandwich Panel comprises of two steel skin (Pre-painted Galvanized Iron Sheet – PPGI) that are bonded with high pressure injected polyurethane foam with tongue and groove joint system complete with cam-locking mechanism. Our slim insulated partitions enable you to divide your interior space into cool and normal temperature zones. With a desired thickness of insulating Polyurethane foam inside, our partitions can be used in any office and provide a visually appealing interior look and reduce your energy consumption at the same time.   These give us the following advantages • Thin walls, Fast installation • Partitions or Rooms can be dismantled and reinstalled. • Outstanding load bearing capacity, High impact resistance. • Hygienic, Odorless • Long life and durable • Resistant to most oils, chemicals and solvents • Fire resistant • Minimizes electric consumption for maintaining desired temperatures

It can give you multiple benefits including applying it over the roof as well as under roof insulation. The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work. Apart from temperature or thermal insulation and upholding your premises or industry in better climate condition in higher temperature, low cost is another advantage why the popularity of roof insulation is increasing. One can apply as much as insulation to make it thicker and more thermal barrier as there are very little difference on the overall cost. Apart from temperature conversation and heat resistance, roof insulation material also gives helping hand to your pocket. It also saves money because every bit of loss in temperature can result into to higher energy consumption and higher expense.

In case of narrow spaces and if pedestrians and vehicles frequently access cold rooms, sliding cold room doors are the ideal solution OPIPL Team offers a top quality cold room and freezer sliding doors at the best price, with a selection of the most competitive products thanks to their efficiency, quality and innovation. OPIPL System is professional in sliding door design and construction. OPIPL Doors Single Sliding Door is used for personnel and material handling traffic where space restricts the use of swing doors or when installation space is only available on one side of the door opening (corridors and loading platforms). Suitable for interior and exterior applications in coolers, freezers and food processing facilities. Unique range of sliding doors for chillier and freezer applications 0°C to -40°C. The door edges are constructed from resistant heavy gauge aluminium profiles. The door leaf panels are injected with high pressure polyurethane, leaf thickness upto 150mm, stainless steel finishes are available. The perfect insulation and sealing of the doors prevents the formation of ice and helps to constantly save energy. All doors have a smooth metal surface which can be easily and hygienically cleaned.   SLIDING DOOR TYPES For Normal and Medium Temperature 0C°/+15C° Doors Type – 90 mm panel thickness For low Temperature -5C°/ -25 C° Doors Type – 100 mm and 125 mm panel thickness For freezing Temperature -25C°/ -40 C° Doors Type – 150 mm panel thickness   ADVANTAGES: • Strongest door leaf edging • Energy savings at freezer doors – using self regulating heating wires • No deformations thanks to extra durability • Very competitive price • Short lead time FEATURES: Application: Sliding doors for chill room, freezer, or blast temperature (Manual Operated) Dimensions: Standard dimension from 900*2100 mm (clear doorway), all other dimensions are available upon customer request. Temperature range: +15C°to -40C° Door leaf: Single leaf, aluminium edges. Heated door frame edges below 0C° using self regulating energy saving wires. Leaf thickness: 90 mm, 100 mm, 125mm or 150 mm Insulation: PUR-foam filled. Density- 40kg/m3 Leaf surface: P.P.G.I shade RAL 9002 with removable protection foil, Stainless steel, Aluminium

OPIPL Hinged doors for both freezer and cool store applications. OPIPL Doors Team offers a top quality cold room and freezer doors at the best price, with a selection of the most competitive products thanks to their efficiency, quality and innovation. The door construction and fittings are specially designed for the food industry and fulfill the environmental requirements of that industry as well as being able to withstand rough treatment. Rooms with a temperature range between 0°C and -50°C are best locked with an OPIPL cold room door. The door edges are constructed from resistant heavy gauge aluminium profiles. The door leaf panels are injected with high pressure polyurethane, leaf thickness up to 150mm, stainless steel finishes are available. The heaters prevent the formation of ice and help to constantly save energy. All doors have a smooth metal surface which can be easily and hygienically cleaned.   Hinged doors TYPES For Normal and Medium Temperature 0C°/+15C°  OPI  Doors– 90 mm panel thickness For low Temperature -5C°/ -25 C°  OPI Doors– 100 mm panel thickness For freezing Temperature -25C°/ -40 C°  OPI Doors– 150 mm panel thicknes   Application : • Strongest door leaf edging • Energy savings at freezer doors – using heaters • No deformations thanks to extra durability • Very competitive price • Short lead time Features: • Application: Hinged doors for chill room, freezer, or blast freezing temperature. • Dimensions: Standard dimension is 900*2100 mm (clear opening), all other dimensions are available upon customer request • Temperature range: Upto -50C° • Door leaf: Single leaf, Aluminium edges. Heated doorframe edges below 0C° using self regulating energy saving wires. • Leaf thickness: 90mm,100mm, 125mm, 150mm. • Insulation: PUR-foam filled. Density- 40kg/m3 • Leaf surface: P.P.G.I shade RAL 9002 with removable protection foil, Stainless steel, Aluminium.

Clean Room Doors offered comes in quality G.I. OR Stainless Steel construction finish and provides for durable, long lasting usage support. These clean room doors also come with drop bottom seal as well as special hinge design so as to avoid accumulation of dust. Some of its features include Aluminum door frame finish, G.I. or S.S. door leaf, superior PUF insulation material support, lock with handle, flush type sealed door options, allows for air tight fully flush connection between wall panel, door frame and door leaf, offers superior chemical and corrosion resistance among others. Rigid PUF insulation of 40 kg/m3 density is injected from high-pressure foaming machines for uniform density throughout the door. The doors are durable, reliable, safe and economical. CLEAN ROOM DOOR SPECIFICATIONS:   SINGLE LEAF AND DOUBLE LEAF. • STANDARD SIZE FOR SINGLE LEAF DOOR IS 900MM*2100MM • MAXIMUM WIDTH OF SINGLE LEAF DOOR CAN BE MANUFACTURED UPTO 1200MM AS PER CUSTOMER`S REQUIREMENT. • DOUBLE LEAF DOORS CAN BE MANUFACTURED IN COMBINATIONS AS PER CUSTOMER`S REQUIREMENT. • COLOR COATING CAN BE DONE IN STANDARD SHADES WITH GUARD FILM. TECHNICAL SPECIFICATIONS: • STANDARD DOOR LEAF THICKNESS – 41MM • STANDARD DOOR LEAF METAL THICKNESS – 0.8MM • STANDARD DOOR FRAME ALUMINIUM/G.I. THICKNESS- 0.8MM • STANDARD DOOR FRAME THICKNESS - 63MM • Infill: Rigid Polyurethane Foam Of Density 40Kg/M3 • 6-STANDARD DOOR ACESSORIES: VIEW GLASS, HINGES, DOOR CLOSER, DOOR HANDLE, DOOR LOCK. • DROP SEAL / PANIC BAR (IF REQUIRED) NOTE: DOOR LEAF THICHNESS AND DOOR FRAME THICKNESS CAN BE CUSTOMISED SALIENT FEATURES OF OUR CLEAN ROOM DOORS * Non-porous surface * Good stability towards water-vapor * High scratch and impact resistance * High chemical resistance * Antistatic * Maintenance free * Maintenance free, Maintains leak proof atmosphere     SEE THROUGH GLASS WINDOWS All window units for the modular clean room system are double glazed, and fit flush with both surfaces of the wall panel system. Each unit is constructed of two panels of 5+5 mm Tempered glass with Double glazed flush view panels. These two panels sit within a structured framework and air fills the space between the two panels. These easy-clean windows add visibility and transparency to modular clean rooms. We provide single-pane or double-paned see through glass to meet your needs. It is completely silicone sealed, and includes a micro-perforation profile with an integral silica gel moisture absorption system, designed to eliminate fogging. Right angled corners add to the strength of the clean room window unit and enhance their appearance.  OVERALL DOUBLE SIDED GLASS THICKNESS CAN BE AVALIABLE IN 50MM, 60MM, 80MM, 100MM. Single-paned toughened glass of thickness 5MM onwards also can be provided as per customer`s requirement.

These sandwich panels are design for a fast and easy assembly. OPIPL Sandwich Panel comprises of two steel skin (Pre-painted Galvanized Iron Sheet – PPGI) that are bonded with high pressure injected polyurethane foam with tongue and groove joint system complete with cam-locking mechanism.

Polyurethane foam is one of the major components of pre-insulated pipe supports. Manufactured at Piping Technology & Products. Polyurethane is different from most plastic materials in that it can be tailored to meet various load requirements of varying applications.

The process of applying insulation material is comparatively easy as most of the housing roof as well as industrial ceilings have some access for caring insulation work. Apart from temperature or thermal insulation and upholding your premises or industry in better climate condition in higher temperature, low cost is another advantage why the popularity of roof insulation is increasing. Light weight and extremely easy to install. • Aesthetically beautiful • Long life