Overhead Cranes Dealers in Navi Mumbai

• Country of Origin: India
• Type: Eot Crane
• Application: Construction

Nandan recognizes the fact that the facilities are the biggest constraint in the execution of orders. We have designed our facilities to be of redundant capacity. We have factories in four locations around Mumbai in Andheri, Kurla, Navi Mumbai and Khopoli. We are also planning a further addition to capacity by means of additional plant within the next 1-2 years. Head Office : Marol 2500 sq ft with small assembly facility. Close to our hearts as it was established 19 years ago. Works (Old) : Kurla 15,000 sq ft workshop which is in the heart of the city and 4 km from the airport. Works Unit 1 : The Turbhe unit of NGSEPL is in the heart of Maharashtra Industrial Area in Turbhe (District Thane) with access to rail and road infrastructure. The unit is completely owned by NGSEPL. The unit consists of the following facilities : 22,500 sq. ft. with shed of 5 m high and having a concrete floor 12� thick and asbestos sheet Office building with 4000 sq of space housing a conference room, staff rooms, directors offices, stores, design room and even an in-house pantry Scope of expansion : The facility can be expanded here by increasing the height of shed as well as the office building. The current space is planned with optimal layout and with full space utilization and leaves scope for future expansions. Works Unit 2 : Khopoli New facility with operates started in March 2008 and having a total area of 40,000 sq ft and built up shed (phase 1 ) of 15,000 sq ft of 9m height and having an EOT of 5 ton capacity Another feature is just 20 kms from JNPT port of Mumbai. Capabilities : All kinds of fabrication Designing and execution PUF and FRP in house Special Purpose machine conceptualization and delivery Design Capabilities : Licenses owned for ALIBRE 2012 for 3 D modeling and analysis Autodesk Simulation mechanical 2012 for FEA modeling and analysis Knowledge to operate Solidworks and ProE Access to third party design firm (LUMIUM) based in Ahmedabad who have tremendous experience in modeling and huge engineering projects Machinery Used : EOT Crane (5 ton) Profile cutting machine (80mm thick capacity with 2000mm dia) Lathe upto 4 feet for machined components Hydraulic Hacksaw machine Part off saws for pipes MIG welding machines TIG welding machines Arc welding machines Inverter based 400A, 300A, 200A, 150A Sheet metal press for 4mmx2500mm capacity Hydraulic press 200, 150, 100, 80 ton capacity Radial Drill machines 50mm, 38mm Pedestal Drill Machines 38mm Magnet drill machines 20mm Hand drill machines 6mm, 10mm, 13mm, 16mm, 19mm Angle Grinder 125mm, 175mm Hydraulic powerpacks for testing upto 6000 psi Pug machines for straight cuts Jib cranes Crane pulleys for site jobs Hydraulic floor crane Vertical Access equipment on wheels upto 10m Stackers for loading/ unloading Painting systems for Polyurethane, enamel, rust proof paints Fibre Glass upto 6mm thick and size of 7.1mx3m PUF with density of 40 kg/m^3 and insitu poring as well as pads with standard size of upto 2m panel Stainless steel work incuding final buffing and polishing upto pharmaceutical grade Access to third party processes : Sheet metal bending upto 12mmx 6300mm single stroke Lathe for long shafts, screws and rounds upto 600mm and 3m long Hot dipped galvanizing Powder Coating Hard chrome plating Centerless Grinding, shaping, slotting, etc Wheel cranes upto 11-20 tons for loading/ unloading Specialized tackles for site assembly Material already working with : MS (Flats, Tubes, Channels, Angles, etc) Aluminum (sheets, chequered plates, tubes, sections, etc) Stainless Steel 304 (sheets, flats, sections, grills) FRP PUF

Aditya make Single Girder cranes are modular in construction and are available in two verities – Electric Overhead Travelling (EOT) and Under slung type.The cranes are of modular design using standard wire rope hoist. Compact and light weight design ensures lower building space, most optimum utilization of floor space and lower building loadsSpecial Features of Modular Cranes : Light Weight and compact construction minimizing building loads and space saving Suitable for Light and Medium duty workshop applications All motors are TEFC with class F insulation Heavy duty cast steel rope guide Upper and Lower hook travel limit switch Additional Counter weight operated over hoist limit switch as option VVVF drives are available as an option Compact and lightweight festoon cable system Pendent and Radio remote control operation The EOT Crane moves over the rails placed on the top of crane runway or Gantry Girders. The crane mainly comprise of bridge girder made from rolled sections such as I beams/ U beams or fabricated box section. The bridge girder is supported on two end carriages, each housing a pair of wheels. The wheels are driven by motor gearbox units. A wire rope hoist is suspended below the bridge girder. The crane can be operated through pendent station hanging from wire rope hoist or through radio remote control. The pendent station can be made to move independent of hoist movement as per customer’s choice.The wire rope hoist comprise of rope drum made from seamless tube. Grooves are machined on rope drum for proper support to the wire rope. Cast Iron rope band and guide prevents wire rope jumping from grooves. The hoisting drive arrangement comprises of motor coupled to an oil lubricated, spur/helical gearbox that in turn provides the motion to the rope drum. An electromagnetic fail safe brake prevents accidental lowering of load in the event of power failure. Limit switch is provided to prevent over hoisting of hook block. Additional limit switch can also be provided to prevent over lowering of hook block.The cross movement of hoist is achieved through the movement of wheels supported on the beam/ box flange. The drive to the wheels is provided through an electric motor-gearbox unit. Fail safe brake and limit switch are provided as additional features is so desired by customer.Power supply to the wire rope hoist is through festoon cable system. The flexible cables are supported by cable hanger or cable trolleys that move on either taught wire or enclosed C track depending on customer choice.The Under slung single girder crane is very similar to overhead travelling crane except for the fact that the end carriages are hung below the gantry girders made of I section.The single girder cranes find their application mainly for capacities up to 20 MT and Span up to 25 Meters. These are commonly used for light and medium workshop duty applications. However, in rare cases the single girder cranes are also used for hot metal ladle handling as well as with grab bucket.

The company has come up as a highly trusted Exporter and Supplier of Double Girder Cranes in Navi Mumbai. The Double Girder Cranes, offered by the company, are offered at the market leading prices on a timely basis. The company sources these Double Girder Cranes from the best in the business. Highlights : High efficiency Strong and reliable Highly durable Quality assured

Aditya make Under Slung Cranes are modular in using standard wire rope hoist or electric chain hoist. The Under slung single girder crane is very similar to overhead travelling crane except for the fact that the end carriages are hung below the gantry girders made of I section. The Crane’s end carriages are hung below the shop I Beam. The Long travel wheels move on the beam flanges and the beam girder is supported below the end carriages.   The Under Slung Cranes can also be supplied with overhang (girder extending beyond crane span) on one side or both the sides as per the requirement of customer. The crane mainly comprise of bridge girder made from rolled sections such as I beams/ U beams. The bridge girder is connected to two end carriages, each housing a pair of wheels and running on the shop beam flanges. The wheels are driven by motor gearbox units. A wire rope hoist or electric chain hoist is suspended below the bridge girder. The crane can be operated through pendent station hanging from wire rope hoist or through radio remote control. The pendent station can be made to move independent of hoist movement as per customer’s choice. Power supply to the wire rope hoist is through festoon cable system. The flexible cables are supported by cable hanger or cable trolleys that move on either taught wire or enclosed C track depending on customer choice.

We are engage in providing Double Girder Cranes in different configurations. We also manufacture an under slung version. Decision regarding the configuration is made depending upon the shed dimensions and lifting requirements of the client. We also provide services like Crane Repair and Crane Maintenance. These equipment, customized as per the requirement of the clients, are assured of greater longevity and smooth functioning. They are anti corrosion in nature and completely safe to operate

Single Girder EOT cranes are a common feature of many industrial workplaces serving various lifting applications. We have the expertise to assist with the design and supply of every aspect of a new Single Girder EOT Crane system, assuring you of unrivalled quality. Safe working load capacity ranges from 0.5 ton to 10 ton and are designed & manufactured as per IS: 807 and IS: 3177 standards. Further, Single Girder EOT Cranes are available in various standards and tailored according to customer specifications. Features Single and double speed type. Safe and reliable hoisting and travelling. Long service life and therefore high efficiency provided by all components. High tensile friction bolt connections between the main girder and end carriages ensures mechanical engineering tolerances creating minimum wear. Power supply to the crab by means of a highly flexible flat cable with a protective earth conductor. Simple and optimum design ensuring minimum dead weight. Easy to install and maintain Electro Thruster Brakes. All motion are protected with limit switches. Available in Class-I, Class-II, Class-III and Class-IV duty. Available in Pendant Control Type and Radio Remote Control Type.      

• Capacities: 1 Ton to 125 Tons

Hercules overhead traveling cranes are designed and manufactured in accordance with IS 3177 OR IS 4137 and classes ranging from M1, M2, M3, M4, M5, M6, M7 and M8, considering adequate factor of safety with respect to appropriate duty classifications. The structural parts of Hercules industrial cranes are designed in accordance with IS 807.In case of double girder crane, a crab is used for hoisting and cross traversing machinery move on the top of two bridge girders. The bridge girders could be of box type construction made from rolled plates or made of standard rolled section depending on the capacity and span of the crane.

We are known for providing our customers with highly functional EOT Cranes. Cranes offered by us find widespread application in factories and industries. In this range, we also offer single as well as double girder cranes at most competitive prices. Premium quality components and hi-tech technology utilized to manufacture our cranes help us ensure these cranes’ compliance with international standards. Specifications: Double Girder Cranes: Up to 150 ton capacity Tailor-made end carriages Twin drive (geared brake motors) Sturdy hoisting crabs Conical rotor hoists 100 % fail proof brakes Panels with genuine Siemens switches VVF (Ac) drives for soft start (optional) Remote control (optional) Desired DSL systems Single Girder Cranes: Up to 20 ton capacity Tailor-made end carriages Twin drive (geared brake motors) Sturdy hoisting crabs Under slung conical rotor hoists 100 % fail proof brakes Panels with genuine Siemens switches VVF (Ac) drives for soft start (optional) Remote control operation (optional) Desired DSL systems

Electric Mobile Cranes are built to handle continuous industrial load in repetitive lifting application. Electric driving and lifting allow handling of heavy loads, offers quick and effortless loading & transporting feature and offer additional productivity and ergonomic advantages. It’s Counterbalance design allow it to lift heavy load of up to 5ton to 3mtrs height. Thanks to its compact, rugged & strong design which make it reach under and over obstacles for increased efficiency. The hydraulic powered telescopic boom gives more flexibility.

• Feature: Specially designed equipment to meet customer’s specific requirement.,Reliable, quiet operation & Low operating cost.

Electric Mobile Cranes are built to handle continuous industrial load in repetitive lifting application. Electric driving and lifting allow handling of heavy loads, offers quick and effortless loading & transporting feature and offer additional productivity and ergonomic advantages. It’s Counterbalance design allow it to lift heavy load of up to 5ton to 3mtrs height. Thanks to its compact, rugged & strong design which make it reach under and over obstacles for increased efficiency. The hydraulic powered telescopic boom gives more flexibility.

Double Girder Cranes, Wall Mounted Jib Cranes, Eot Crane, electric wire rope

Ishar hoist & cranes pvt. Ltd. Is one of the premier organizations involved in manufacturing and supplying of a wide range of hot cranes in india.

electric overhead travelling cranes, cable trolleys, crane components

container handling cranes, Eot Crane, Gear Box, Hoist, mono rail track

Eot Crane, Manual Hoists, Material Handling Equipment, Electric Hoist

Girder Eot Cranes, Hydraulic Hand Pallet Truck

HOT Crane, Transfer Trolley, Eot Crane, Jib Crane

Eot Crane, Steel Alloy

Frequency Conversion Overhead Crane, Hp Casing Rotor Turbine