Pharmaceutical Processing Equipment Dealers in Navi Mumbai

Offered conical blender is an efficient and versatile blending machine for mixing and lubrication process of dry powders and they give best result for powders due to medium speed of the container. This conical blender is mainly suitable for powder and granules type material and also has medium movement and will result in good quality granules. Features : Conical shape enables uniform mixing and easy discharge Easy loading and unloading Easy in cleaning Characteristics of Conical Blender : Dry mixing products in powder form Conical shape enables uniform mixing and easy discharge Easy loading and unloading Easy in cleaning Require minimum maintenance Manual rotating facility Maximum care has been taken to ensure safe operation of unit Made of carbon steel and stainless steel Application of Conical Blender : Food industry Fertilizers Pesticides & herbicides Milk powder Coffee Polyethylene Cosmetics Plastic powder Spice blends

• Brand Name: Alfa
• Material: Mild Steel
• Display: Analog
• Diameter: 15 cm
• Hydraulic Pressure Gauge: 0-2000 kN
• Ram Stroke: 205 mm
• Accuracy: 100 %

We are offering laboratory civil engineering compression testing machine. specification: we supply compression testing machine - plate model, complete with single pressure gauge & self made motor, 440 ‘v’ load frames. Available in 50 tons, 100 tons, 150 tons, 200 tons, 300 tons, 500 tons salient features : the compression testing machine incorporates design features to enable high accuracy testing with economy, speed & versatility. • loading accuracy as high as + 1% • straining at variable speeds to suit a wide range of materials. • continuous roll autographic recorder supplied as standard to enable study of the behavior of materials • motor driven geared shafts for quick effortless adjustment of cross-head-to facilitate rapid fixing of test specimen. • high reading accuracy due to large size and design of dial. • wide range of standard and special accessories, including load stabilizer. • large effective clearance between columns enables testing of standards specimens as well as structures. • simple controls for easy of operation. • robust staining frame of an extremely rigid construction. • safe operation ensured be means of safety devices. Other information pay mode terms: tt (bank transfer) minimum order quantity: 01 piece packaging details: wooden packing

Low maintenance, durability and easy operation of Ss double cone blender make them highly demanded. This double cone blender is ruggedly structured and is used in vast number of industrial purposes. We are called upon as one of the celebrated blender manufacturers from India. These can be obtained at reasonable prices.

• Brand Name: Chemtron Make

A green technology to extract absolutes with the help of supercritical CO2 as a solvent instead of conventional solvent extraction and steam distillation which take up a lot of energy and time for extractions. This SCFE is faster and greener. You get pure extracts free from pesticides, impurities, free from solvent even in ppb levels. Go for the Green Technology of the Future.

• Capacity: 2000KN
• Brand Name: QCCL
• Material: Mild Steel
• Phase: Single Phase
• Voltage: 440V
• Color: White and Blue
• Weight: Approx. 700kg
• Automatic Grade: Automatic
• Country of Origin: Made in India
• Usage/Application: Compression Testing for Concrete Cube
• Display Type: Digital
• Frequency: 50Hz
• Set Content: 1 Compression Testing Machine And 1 Controller

Capacity: 1HP, 3HP, 5HP, 7.5HP, 10HP, 12.5HP Model Application: Granulation of dry powders for tablet manufacture bulk density fine tuning sizing. Uniform sizing of wet granulation in tablet manufacturing.Lump-free homogeneous blending to precise-size requirements.Reducing difficult, sticky, heat-sensitive agglomerates into pieces, crumbs or powders of uniform size, continuously without excessive heat buildup or screen blockage. Working Principle of Co Mills The Co Mill is used for a wide range of products and applications. It can be used for mixing and dispersing, size reducing, separating and bulk density adjustment. The typical particle size distribution (PSD) is tightly contained with the 1 mm Sieve to 0.25 mm Sieve range (18 mesh to 120 mesh), depending on the screen and impeller choices. Traditional milling technologies do not have the same control over the PSD resulting in more fines & thus causing more of dust, whereas, in a Co Mill, the fines generated are much lesser & no dusting of materials, thus, giving a better and efficient milling results. We are manufacturer, supplier and exporter of co mills according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Advantages of Co Mills: The output in co mill is very near to the size of the sieve used approx 80% -90% where as in multi mill it is 1/3 of the sieve used. The fines generated are on a lower side as compared to other mills. Heat generation in co mill is comparatively very low as it works as forced pressure. Other mills have more of dusting as compared to co mill. Drive element are reduced in co mill as it is direct driven. Output in co mill is more than in other mills. Design is flexible as per your requirement. Design is suitable for dry as well as wet milling.

• Brand Name: AIMIL
• Certification: Conforms to BS-12390, ASTM C39, C 109, ASH TO T22, ASTM, EN and BS
• Application: Compression testing of concrete
• Function: Compression and Flexural strength of cubes, beams and cylinders can be measured
• Power: 220V / 230V AC, 50Hz,
• Model Number: Compression Testing Machines Analogue, Digital, Micro Processor Based, Servo Controlled (AIM 302-A)
• Place of Origin: INDIA

Aimil Series Compression Testing Machines are the finest of their types available. Their rugged construction and extreme simplicity makes it possible for even non-technical personnel to operate them with ease and complete dependability. In particular, the portable units, which are small in dimensions, sturdy and light in weight, make quality control testing possible in areas where commercial testing facilities are not available and where the transportation of larger and much heavier machines would be difficult. Aimil Compression Testing Machines conform to IS: 14858(2000) and calibrated with an accuracy of± 1 % as per the requirement of 1828(Class 1) . It can also be supplied as per BS : 1881 and other associated International Standards. These machines are available in 50kN, 1OOkN, 500kN, 1OOOkN, 2000kN, 3000kN & 5000kN Capacities. Compression Testing Machines Classification : Analogue models. Digital models with pace rate indicators. Micro Controller based models with automatic pace rate controllers. Fully Automatic models. Salient Features of Compression Testing Machines are: High stability. Self-aligning platen assembly. Load Gauges are calibrated in kN against certified Proving Rings, traceable to NPL NCC BM. Suitable for testing cubes and cylinders of various sizes. Using special platens, bricks can also be tested. Logged data printing facility through a parallel port interface available in digital and micro controller based versions. Calibration process accreditated by NABL (National Accreditation Board for Laboratories). Machines with CE mark also available, on special request. Operator's safety features like metal door with a perspex window and overload tripping device are provided in all models.

• Capacity:: 1HP, 3HP, 5HP, 7.5HP, 10HP, 12.5HP Model

Application: Granulation of dry powders for tablet manufacture bulk density fine tuning sizing. Uniform sizing of wet granulation in tablet manufacturing.Lump-free homogeneous blending to precise-size requirements.Reducing difficult, sticky, heat-sensitive agglomerates into pieces, crumbs or powders of uniform size, continuously without excessive heat buildup or screen blockage. Working Principle of Co Mills The Co Mill is used for a wide range of products and applications. It can be used for mixing and dispersing, size reducing, separating and bulk density adjustment. The typical particle size distribution (PSD) is tightly contained with the 1 mm Sieve to 0.25 mm Sieve range (18 mesh to 120 mesh), depending on the screen and impeller choices. Traditional milling technologies do not have the same control over the PSD resulting in more fines & thus causing more of dust, whereas, in a Co Mill, the fines generated are much lesser & no dusting of materials, thus, giving a better and efficient milling results. We are manufacturer, supplier and exporter of co mills according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Advantages of Co Mills: The output in co mill is very near to the size of the sieve used approx 80% -90% where as in multi mill it is 1/3 of the sieve used. The fines generated are on a lower side as compared to other mills. Heat generation in co mill is comparatively very low as it works as forced pressure. Other mills have more of dusting as compared to co mill. Drive element are reduced in co mill as it is direct driven. Output in co mill is more than in other mills. Design is flexible as per your requirement. Design is suitable for dry as well as wet milling.

• Voltage: 210-480 V
• Material: Stainless Steel
• Frequency: 50-60 Hz
• Phase: 3 Phase
• Diameter: 12-60 inches

• Automation Grade: Semi-Automatic
• Condition: New
• Portable: No

We are the manufacturers and supplier of this products.

• Voltage: 220 V
• Material: Stainless Steel,Mild Steel
• Capacity: 50-800 kg/hr
• Brand: Sepro

We offer SS Scoop Open Type, which is made of stainless steel 316 quality material. It has a handle on one side. These products are used for different purposes such as scoops that are used for scooping purpose, and measuring jar that is used to measure the liquid content. Specifications: We have collection of 316 stainless steel Scoops close type. Available in various capacity from ¼ kg to 2 kg.

Single deck and double deck vibrating screen with without dust cover in SS 304 / SS 316 / GMP construction. Complete Assembly is mounted on fabricated base & isolated by means of specially designed springs. Vibrating assembly is fitted with vibratory motors. Motors are designed for continuous operation. We are located in Navi Mumbai,Maharashtra and operating as manufacturer, supplier and exporter of double cone octagonal blenders according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and entire world.  

The pharmaceutical industry needs highly accurate metal detection to meet the requirements of demanding consumers and stringent legislation. Tablet metal detector provides class leading, on line metal detection. This metal detector unit is manufactured from stainless throughout to provide a hygienic easily cleaned inspection; a robust stainless steel reject flap is operated by a high- speed electrical solenoid for clean, precise rejection of contaminated product with minimum waste. This metal detector chute can be quickly and easily dismantled for routine cleaning and product changeover. The tablet metal detector is designed for simple adaptation and flexible, efficient operation on the line. The complete unit takes up minimum system length. the tablet metal detectors incorporates a simplified and refined design of automatic balance coil principle which eliminates all setting up controls and permits long consistent performance. The metal detector consists of an electrical coil mounted in stainless steel box with a central opening or aperture. A teflon chute passes through the aperture on an incline, down which tablets flow. The tablets can be fed directly from a tablet press, or after a detester. The tablets passed from the chute through a reject flap which diverts contaminated tablets into a reject flap which diverts contaminated tablets into reject containers and allows good tablets to flow through. Unique metal detectors are capable of detecting minute particles of contamination of ferrous, non-ferrous and nonmagnetic stainless steel.

Reliable De-dusting in accordance with cGMP guidelines.Compact Construction.4 Models Available.Easy operation through integration to the Tablet press, Metal detector and Tablet container.Adoptable to any tablet press.Can be used for any shape & size of Tablets/Capsules Requires less space. Easy to move, dismantle for cleaning.Lifts Tablet/Capsules to the height of tablet container for direct loading. Dust Free operation of gentle De-burring and De-dusting.Metal Detector can be attached.

  In pharmaceutical companies screening is done under Vacuum, for which a specially designed shifter is introduced by Separation Techniques Pvt. Ltd.

We manufacture a range of Scoops and Spatula made extensively for the usage in most of the industrial purpose. These are made of high class stainless steel along with the combination of other metal that provide this product rugged structure and durability, moreover makes it handy and easy to use. The scoops and spatula serve the purpose of handling material like chemicals, dyes, drugs, food items, beverages etc. These are also used widely in laboratories to handle the chemical salts effectively. Features: Easy to handle High strength Highly durable No sharp edges Easy to clean Light weight Usage: This equipment have usage in every industry like carrying material of pharmaceutical industry, chemical laboratories, biological labs, beverages, dyes and pigments. Instructions to use: After transferring the material from the scoop once it is used, the scoops and spatula must be cleaned effectively to avoid chemical reactions between the previous and other material for which these equipments are used afterwards.

Our wide area network helps us in delivering the products across Navi Mumbai(India) and other markets. We have efficiently utilized our storehouse space in the most efficient way as we have segregated units to keep the products sorted for quick and urgent deliveries.

• Type: 1-2 deck
• Brand Name: Promas's
• After-Sales Service Provided: we are always there to help our beloved customers

Single deck and double deck vibrating screen with without dust cover in ss 304 ss 316 gmp construction. Complete assembly is mounted on fabricated base & isolated by means of specially designed springs. Vibrating assembly is fitted with vibratory motors

• Application: Hotel
• Material: Stainless Steel
• Packaging Type: Box
• Thickness: 1-3mm
• Weight: 100-200g

• MODEL: KVS-12"
• Output kg / hour: 1 to 10 kg/hr Depends on sieve and product
• Screen Diameter: 300 mm
• Electric Motor: 0.25 Hp / 0.18 Kw
• Charging height: 1125 max. approx
• Discharging height: 843 max approx
• Electric Motor: 1 HP / 0.75 Kw

The Laboratory Vibro Sifter, due to its high capacity and compact size, is suitable for processing small batch of pharmaceutical materials and in research of pharmacy colleges, research and development laboratories. The machine is embedded with complete S.S. Fabrication structure fitted with Vibro motor and 12" Sieve and movable on 3 Nos. castor wheel for easy movability. It is designed on the principle of 'Gyratory Motion". The material is fed on to the centre of the screen and then travels on a spiral path to the periphery whilst the fine particles fall through. The material being screened is therefore drawn apart automatically and no additional force is exerted to separate coarser particles. The sieving is done gently and with little abrasion. New Design Features : Design is cGMP - Current Good Manufacturing Practices compliance. All contact parts AISI 316 & non contact parts AISI 304. Easy Movability Noiseless and Maintenance free. Low power consumption. High Operating simplicity for easy cleaning of contact parts. Easy accessibility for setting, maintenance and cleaning. Available vide range of sieve.

hydraulic compression molding machine, hydraulic cable cutting machine

We are offering pharmaceutical equipment.

PP Scoop, FBE Bags, Mono Filament Fabrics, ss scoop, PP Scraper

Colloid Mill, Cone Mill machines, V-Blender

ss scoops, Single Decker Air Handling Unit, Swirl Diffusers

capsule inspection cum polishing machine, Manual Capsule Filling Machine

Double Cone Blenders, pharma chemical, pharma machines