PID Controllers Dealers in Kopar Khairane, Navi Mumbai

Features Provides Enhanced Features for Data Acquisition or Multi-zone PID Control Applications Supports up to 16 modular controller module Stores Module Configuration Information and Automatically Reprograms Replaced Modules Protocol Conversion Feature Converts up to 15 Protocols Simultaneously Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems 2 RS-232 Serial Ports 1 RS-422/485 Serial Port 10 Base-T/100 Base-TX Ethernet Port Independent Serial Ports Provide Virtually Unlimited Integration Methods UL Listed for use in Hazardous Locations. (See literature for class and division details.)

X96 is a full-featured PID controller designed for use in hazardous environments. It is housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100, Cu53 as well as other 3-wire RTD sensors, 0 - 50 mV and 4-20 mA or 0 - 20 mA linear inputs. A large LED dual-display on the front of the process controller shows the difference in values of the setpoint and process value while 11 additional LEDs indicate the state of each of the 4 relays, 4 setpoints, AutoManual and communication status. Buttons on the front of X96, accessible through the flameproof enclosure, allow operators to easily set up to 5 setpoints - 4 for the relays as well as one for a 4 - 20 mA signal should they choose to use the linear output for control. With an error of only 0.1% of the full-scale, this is a process controller of superior accuracy. X96's electromagnetic relays trigger heating, cooling or any of 6 types of alarms - full-scale highlow, deviation highlow, inband and outband. It also retransmits an isolated output signal to other devices such as a Programmable Logic Controller (PLC). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. X96 is an auto-tuning controller; from cold start or at setpoint. Typical applications are temperature control, RH control, thyristorised heating applications, AHU control in HVAC and BMS applications.

   Feature: T/C, RTD, Linear Input selection. P, PD, ON/OFF control mode selection. Universal Power supply : 100-240V AC, 50/60Hz. DC 24V is also available for option. 3 Alarm output. (note 1) Form A or Form B contact alarm function can be selected. 4-20mA PV Retransmission , or RS-485 communication(MODBUS RTU) is available for option.

pid controllers, Vaf Meters, Electrical Panel, Hmi, Temperature Controller

pid controllers, Fixed Gas Monitor, bitumen drum filling system