Process Control Equipment Dealers in Airoli, Navi Mumbai

• Type: Thermocouple
• Material: Stainless Steel
• Length: 2.5mtr, 3.5mtr, 3mtr, 4mtr
• Application: Industries
• Power Source: Electric
• Feature: Durable, Fine Finished, High Strength, Quality Tested, Reliable
• Tenmperature: 0-100 Deg C, 100-200 Deg C, 200-300 Deg C, 300-400 Deg C, 400-500 Deg C
• Power Source: Electric
• Material: Stainless Steel
• Surface Treatment: Powder Coated
• Frequency: 50 Hz
• Temperature Range: 0-200 Degree C
• Voltage: 220 V

SIXSENSE offers complete system for molten metal temperature measurement which consists of SENSE-1800 (Molten metal indicator in 2” /4 “) SRD-1800 (Remote Jumbo Display) SLC-1800 (Traffic Light Indicator) Foundry Master Computer Software

FEATURES: Programmable sensor inputs enable the simple connection of numerous sensors Up to 5 alarm outputs (relay, SSR or norm signal).2- or 3-point controller,3-point-step controller as well as PID controller.Safe heater break function.Digital control inputs for external set point setting.RS 485 interface, MODBUS protocol.Programming adapter for easy transfer of operating data. AUTOTUNED , MICROPROCESSOR BASED DIGITAL CONTROLLER PID control function2- and 3-point control function3-point-step control MEASURING INPUTS Resistance thermometer Pt100Semiconductor PTC / NTCThermocouples J, K, S, B, E, L, N, R,T,CVoltage signals 0...50 mV, 0...60 mV NORM SIGNALS 4...20 mA0...10 V OUTPUTS Max. 4, up to 2 x control- resp. 3 x alarm-output possibleRelay SPST 5 A / 2 A / 250 VacSSR drive 14 Vdc/ 7 mA (20 mA) NORM SIGNALS (CONTROL OR SIGNALS) 4...20 mA0…10 V DISPLAY 4-digits 7-segment LEDs 2-lines Process value red, 7 mm high Set value green, 7mm high.

• Features: Excellent performance, Compact design , Durability.
• Supply Voltage: 24 VDC, ±10%, 250 mA, 6 VA

We offer range of Air Shower units that are made of high grade stainless steel sourced from authenticated vendors. Air showers are made from the usage of steel powder coated in stainless steel, these are basically the specialized chambers through which a person has to pass before entering clean room in order to prevent contamination from external sources that a person might carry with himself. Decontamination is done by clearing off dust and dirt particles from bodies of clean room personnel to minimize contamination of equipment or products. Features: Decontamination process High grade material Sterilization of environment High dust holding capacity Wide range of standard sizes Customized specifications as working areas Usage: Air showers have wide usage in clean rooms, hospitals for fine particulates filtration mainly in operation theatres, pharmaceutical & chemical research laboratories, nuclear industry, food processing and electrical industries. Instructions to use: The air shower should be installed with sterilized hands and clothes preventing the system from any sort of contamination that prevents any further adverse effect on the processes.

Having excellent seismic resistance, the Programmable Logic Controller is manufactured in confirmation to the set industrial standards. We offer the best Programmable Logic Controller at rates that will never break the bank. The Programmable Logic Controller works well in an environment having corrosive gases and dust. We have become a respected name to get world-class Programmable Logic Controller, which are admired for durability, easy & safe usage and high heat resistance. Uses : Industrial control Automation

Features: Type of control PID Control unit Digital indicating controller, Temperature sensor Type RTD, Pt100 Heating control Proportional power controller, (SSR), Input 4-20 mA, Capacity 20 A. Heater Type Electrical 2 coil, Capacity 3 KW. Rotameter 6-200 LPH., Process tank Capacity 0.5 lit, insulated. 230 +/- 10 VAC, 50 Hz, 1 phase with On/Off Switch.

• Large Memory: 128KByte Data Memory
• Connectivity: EtherNet
• EtherNet Port: 10/100Mbps
• Security: Powerful Password Protection
• Compatibility: Win XP/Vista/7(32/64bit)
• Performance: Optimum

We are offering electronic pressure controller. * netel gas chromatograph model chrom lite gc-3000a with single flame lonization detector, with one packed or one splitsplit-less injection port. * electronic pressure controller (epc) provides excellent performance with capillary columns. *3 independent heated zones up to 400 c for individual control of injector, detector and oven. *higher sensitivity flame ionization detector requires no make up gas due to unique zero dead volume design. *32 keys for setting of the parameters & eight status l.e.d. Indications including oven ramp status. * pc control communication with rs. 232.

ATS is a full service fire sprinkler and low voltage contractor. We have dedicated inspectors who are certified to inspect fire pumps, fire sprinkler, fire hydrant, and fire alarm systems. Our fire pump inspectors comply with the code requirements of the National Fire Protection Association (NFPA) 25, NFPA 72, state requirements, and city and county local ordinances. Upon completion of an inspection, ATS will provide your staff with a detailed inspection report. Our electronic inspection record systems gives us the capability to know when future inspections are due; we will call to schedule the inspection to insure your system is within guidelines.

We are offering hot runner controller. Dual line led display, soft start, pid auto temp control, card type controller, optional buzzer & hmi control

• Features: Microprocessor based for fast and accurate measurements. Weatherproof Case and Compact Design (IP 54) Programmable Relay & 4 to 20mA Outputs with user defined Hysteresis Programmable High & Low Alarm functions Etc.

TDS Conductivity are the primary controlling parameters for any process used in a wide variety of industries ranging from water, chemical, pharmaceutical, food processing etc. Our online controllers are used to monitors these process parameters continuously and helps to take corrective action with its relay & current outputs. These reliable, accurate and robust meters are designed with a compact housing which fits in standard industry panel. Also these meters can be easily calibrated and can display multiple parameters at the same time.

X48V1 is a full-featured PID controller designed for use in hazardous environments. It is housed in a heavy-duty enclosure certified flameproof for gas groups I, IIA & IIB with IP65 rating - completely dust proof and a good level of protection against water. It receives input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100, Cu53 as well as other 3-wire RTD sensors, 0 - 50 mV voltage and 4-20 mA or 0 - 20 mA analog current signals. A triple 7-segment LED display and individual LEDs on the front of the process controller indicate set point and process values, relay status, automanual power status and communication status. Buttons on the front of X48V1 ,accessible through the flameproof enclosure, allow operators to easily set up to 1 2 3 set points.X48V1's electromagnetic relays trigger heating, cooling or any of 6 types of alarms - full-scale highlow, deviation highlow, in band and out band.It also retransmits an isolated output (1 or 2) signal to other devices such as a Programmable Logic Controller (PLC). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. X48V1 is an auto-tuning controller, from cold start or at set point. Typical applications are temperature control, RH control, thyristorised heating applications, AHU control in HVAC and BMS applications.

The c015 series is adjacent measuring thermocouples designed for measurement of surface temperature of moving or rolling materials, such as heating rollers, press rollers and running sheets. The thermocouple has the built-in automatic correction circuit for the difference between surrounding air and actual temperature of an object.

In modern world most of the conventional controls of relay-contactor based logics are being replaced by PLC based systems. Being flexibility of operation and changing of logic PLC- Programmable Logic Controllers are extensively used in all type of industries Considering the preference of client from view of past experience, availability of support  we offer our client any make of PLC such as Siemens, Allen Bradley, GE Fanuc, Mitsubishi, Schneider for making of PLC based control system panels. Also wide range of MMI are used in combination of above PLCs these include Siemens, Allen Bradley, GE Fanuc, Mitsubishi, Schneider. We provide complete solutions for the process control and other applications right from Designing, Drawing approval, manufacturing and commissioning. Our engineering team is capable of providing support for end  to end solutions REMOTE INPUT OUTPUT – RIO PANELS To save the cost of field cabling and also the time Remote I/Os are increasing the applications in the fields where no of I/O – input outputs increase beyond 500 I/O We also provide the Remote I/O Panels for usage in the field. The link between main PLC and Remote I/O can be Optical fibre, TCOIP or any other communication protocol. We have worked with wiring for all above linking from Optical Fiber, TC/PIP –Ethernet, ASCII, MODBUS, CANOPEN, PROFIBUS etc.

Features Provides Enhanced Features for Data Acquisition or Multi-zone PID Control Applications Supports up to 16 modular controller module Stores Module Configuration Information and Automatically Reprograms Replaced Modules Protocol Conversion Feature Converts up to 15 Protocols Simultaneously Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems 2 RS-232 Serial Ports 1 RS-422/485 Serial Port 10 Base-T/100 Base-TX Ethernet Port Independent Serial Ports Provide Virtually Unlimited Integration Methods UL Listed for use in Hazardous Locations. (See literature for class and division details.)

• Power Supply: 24 VDC, 2 Amps.
• Dimensions: 270 mm (W) x 178 mm (H) x 100 mm Depth max.

Flame Proof Temperature Indicator a top class industrial controller at an affordable price.!! The series HMI-040 is a perfect replacement to strip chart paper recorders, data loggers andmonochrome displays.

• Weight (lbs): 1.6 lbs
• Size: 7.13L x 5.13W x 1.91H inches
• Operating Temperature (C): -40°C to 80°C fuel temperature
• Electrical Output Range: 2970 watts

Parker’s Fuel Boost Pump Controller is a 270 VDC brushless, sensorless motor drive controller with electro-magnetic interference (EMI) filtering and lightning protection. The controller performs motor power regulation based on a discrete input command. The controller features a multiprocessor-based architecture which allows motor control operation along with health monitoring and status reporting. The primary Digital Signal Processor (DSP) is responsible for the motor control. The Secondary DSP is responsible for health monitoring and status reporting. The discrete input command has four power settings : OFF (pump off), LOW (50 percent), MEDIUM (75 percent) and HIGH (100 percent).

    FEATURES * HMI* I/Os (upto 50) * 1 Analog Input*  MODBUS Communication* 24 VDC to drive inputs* Encoder Input   APPLICATIONS * Heating*  Loading & unloading of material*  Close loop operation* Chemical Process*  Industrial Process   DESCRIPTION programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

• Type: Motion Controllers
• Material: Aluminium, Plastic, Stainless Steel
• Voltage: 110V, 220V, 240 V
• Application: Industrial
• Power Source: Electric
• Feature: Durable, Light Weight, Low Power Consumption, Stable Performance
• Warranty: 1Years, 2 Years

Ac Induction Motor, sensor products, Variable Frequency Drive

fabricated water level controllers, industrial water level controllers

amc gas plants, valve spares, auto valves, Air Storage Tank

sensor rtd, Recorders, Infrared Sensor, Counters

ac servo motor drive

TEMPERATURE, industrial instrument calibration services

maximum demand controllers, proximity control unit, instrument stands

Pressure Monitors Controller, Media Preparator, coating thickness measurement

Flameproof Indicators, Conductivity Meter, Ion Concentration Meter