Process Control Equipment Dealers in Sai Nagar, Navi Mumbai

• Brand Name: REFINEMENT SCIENTIAL
• Input Sensor: pH/ORP sensor
• Model Name/Number: REFX1
• Usage/Application: Industrial
• Range: 0 - 14 pH

We are offering conductivity controller. This instrument is a panel instrument for on-line monitoring of industrial process conductivity. Range switch over and constant check can both be freely set and adjusted through the operation component on the rear panel; unique signal collecting and processing technology and special thick film circuit are adopted to make measurement accurate and operation stable; there are also other features such as linearized data, automatic temperature compensation, not subject to the length change of cable and maintenance-free. It has control function, including setting of over limit of conductivity, and the outputs are control contacts. It’s an ideal auxiliary instrument of various types of small pure water equipment sepicification: measurement range: 0~20, 0~200, 0~2000 (μscm) optional accuracy 1.5% (fs) stability ±2 × 10-3 (fs) 24h display mode back light 3.5 lcd digital display auxiliary electrode 1.0cm-1 plastic electrode thread dimension 12″pipe thread control output mode single relay contact (normally open) contact capacity 5a250v ac ( with resistive load) environment conditions temperature: 0~50; relative humidity: ≤85% temperature compensation automatic compensation with 25 as the reference temperature. Cable length 5m or on other agreement (5~30m) temperature compensation automatic compensation with 25 as the reference temperature power supply ac 220v ±10% 50hz cable composition rvp+coaxial 75-2 double shielding operation pressure of conductance cell 00.5mpa cable length 5m or on other agreement dimensions 48 × 96 × 100mm (height × width × depth) slot dimensions for installation 45 × 91mm (height × width)

We are providing process control equipments:- industrial valve our range of industrial valves is used for various applications across the industry. These comprise a forged steel valve, industrial globe valves, piston valve, gate and check components. The valves are procured from reliable vendors in the market. features: forged steel valve, industrial globe valves, check valves, gate valves, piston valve excellent mechanical strength available in different specifications screw air compressor we are one of the leading suppliers of world class high efficiency screw air compressor that are procured from trusted vendors in the industry. These industrial air compressor are powered by an electric motor and gears. The industrial air compressor have pressure range of 8 – 10 bar and 115 – 150 psig. the other features include: effective fad: 5.25 – 13.01 m3min; 185 – 459 cfm rated power: 45 – 90 kw; 60 – 125 hp etp stp wtpwe are one of the eminent suppliers of etp stp wtp plants to our clients in the country. These water treatment plants, sewage treatment systems, effluent treatment systems are procured from trusted companies and quality tested at all parameters. We also offer installation service on the water treatment plants, sewage treatment systems, effluent treatment systems. Used for removing chemicals and impurities from water, these water treatment plants, sewage treatment systems and effluent treatment systems are mostly, used in chemical and pharmaceutical industry.

we offer you considerably more than just a simple time over current protectionthe siprotec 7sc80 feeder protection can be used for protection and automation of medium voltage distribution feeders with grounded or low resistance grounded, isolated, or compensated neutral point.the 7sc80 features flexible protection functions. 20 additional protection functions can be created by the user. For example, a rate of change of frequency function or a reverse power function can be created. The relay provides circuit-breaker control.additional primary switching devices (grounding switches, transfer switches, and isolating switches) can also be controlled from the relay. Automation or plc logic functionality is also implemented in the device. The integrated programmable logic (cfc) allows the user to add own functions, e.g. For the automation of switchgear (including interlocking, transfer and load shedding schemes). The user is also allowed to generate user-defined messages. The upgrade of device and communication firmware is also possible via ethernet.highlights-support of feeder automation applications, e.g. Fault isolation and service restoration-designed for harsh environment-extended temperature range 50 c up to 85 c-open for all different communication technologies, e.g. Radio, which are used for feeder automation-integrated gps module is available for time synchronization-full remote access supported for firmware and parameter updates and upgrades-a web based hmi provides complete remote control of the device-9 programmable function keys-6-line display-integrated switch for low-cost and redundant optical rings. Devices can be connected directly with each other at electrical modules-parallel running communication protocols-redundancy protocols rstp, prp, and hsr for highest availability-current jump detector-extended cfc capabilities-rtu version without protection features-secondary current transformers values (1 a / 5 a9 settable using digsi-buffer battery exchangeable from the side-usb front port-relay-to-relay communication through ethernet with iec 61850 goose-stainless steel housing-millisecond-accurate time synchronization through ethernet with sntp-inputs for low power cts and vts according to iec 61869-6 (formerly iec 60044-7 and iec 60044-8) functions control functions/programmable logic commands for the ctrl. Of cb, disconnect switches (isolators/isolating switches) control through keyboard, binary inputs, digsi 4 or scada system user-defined plc logic with cfc (e.g. Interlocking) monitoring functions operational measured values v, i, f energy metering values wp,wq minimum and maximum values circuit-breaker wear monitoring fuse failure monitor 8 oscillographic fault records trip circuit supervision   communication interfaces hardware ethernet electrical and optical (miltimode or single-mode) iec 61850 edition 1 and 2 dnp3 tcp profinet iec 60870-5-104 ethernet redundancy protocols rstp, prp and hsr usb front interface for digsi 4 hardware 4 current transformers 1/4 voltage transformers 12 binary inputs 8 binary outputs 1 life contact pluggable current and voltage terminal blocks connection option for low-power current and voltage transformers

We offer you considerably more than just a simple time over current protectionThe SIPROTEC 7SC80 feeder protection can be used for protection and automation of medium voltage distribution feeders with grounded or low resistance grounded, isolated, or compensated neutral point.The 7SC80 features flexible protection functions. 20 additional protection functions can be created by the user. For example, a rate of change of frequency function or a reverse power function can be created. The relay provides circuit-breaker control.Additional primary switching devices (grounding switches, transfer switches, and isolating switches) can also be controlled from the relay. Automation or PLC logic functionality is also implemented in the device. The integrated programmable logic (CFC) allows the user to add own functions, e.g. for the automation of switchgear (including interlocking, transfer and load shedding schemes). The user is also allowed to generate user-defined messages. The upgrade of device and communication firmware is also possible via Ethernet.Highlights-Support of feeder automation applications, e.g. fault isolation and service restoration-Designed for harsh environment-Extended temperature range 50 C up to 85 C-Open for all different communication technologies, e.g. radio, which are used for feeder automation-Integrated GPS module is available for time synchronization-Full remote access supported for firmware and parameter updates and upgrades-A web based HMI provides complete remote control of the device-9 programmable function keys-6-line display-Integrated switch for low-cost and redundant optical rings. Devices can be connected directly with each other at electrical modules-Parallel running communication protocols-Redundancy protocols RSTP, PRP, and HSR for highest availability-Current Jump detector-Extended CFC capabilities-RTU version without protection features-Secondary current transformers values (1 A / 5 A9 settable using DIGSI-Buffer battery exchangeable from the side-USB front port-Relay-to-relay communication through Ethernet with IEC 61850 GOOSE-Stainless steel housing-Millisecond-accurate time synchronization through Ethernet with SNTP-Inputs for Low power CTs and VTs according to IEC 61869-6 (formerly IEC 60044-7 and IEC 60044-8)

• Brand Name: ION Electricals
• Temperature Range: -100 to 400 deg cel
• Voltage: 220 V
• Frequency: 50 Hz
• Model No.: Multi PID
• Controller Function Type: PID
• Controller Type: On/Off Control, PID
• Input Sensor: RTD, Thermocouple
• Display Size: 4 digit,7 segment
• Logic: Heating or Cooling
• Input Sensors: Thermocouple (J & K) & RTD (PT100)

Water Pump, Water Pumps

automatic water level controllers, Electronic Liquid Level Controllers

Water Pumps

process control equipment, master clock, DIGITAL MASTER SLAVE CLOCK SYSTEM

Temperature Controller, Industrial Items, sensor, instrument calibration

auto pump controller, Smart Relay Panels

Speed Dome Camera Keyboard Controller, Electrical Power Substation

pump controllers