Process Control Equipment Dealers in Ttc Industrial Area, Navi Mumbai

• Features: Microprocessor based for fast and accurate measurements. Weatherproof Case and Compact Design (IP 54) Programmable Relay & 4 to 20mA Outputs with user defined Hysteresis Programmable High & Low Alarm functions Etc.

TDS Conductivity are the primary controlling parameters for any process used in a wide variety of industries ranging from water, chemical, pharmaceutical, food processing etc. Our online controllers are used to monitors these process parameters continuously and helps to take corrective action with its relay & current outputs. These reliable, accurate and robust meters are designed with a compact housing which fits in standard industry panel. Also these meters can be easily calibrated and can display multiple parameters at the same time.

• Model Number: HTC96,HX96A, RHC301 ,RHC201
• Size: 96 x 96 x 100,
• Rht sensor: Remote

Radix manufactures two rh+t on-off controllers, htc96 and hx96a, for applications involving humidity and temperature control, and two rh wet and dry bulb controllers, rhc201 and rhc301, for pure humidity control.

Features Provides Enhanced Features for Data Acquisition or Multi-zone PID Control Applications Supports up to 16 modular controller module Stores Module Configuration Information and Automatically Reprograms Replaced Modules Protocol Conversion Feature Converts up to 15 Protocols Simultaneously Extensive Built-in Driver List Allows Easy Data Mapping to PLCs, PCs, and SCADA Systems 2 RS-232 Serial Ports 1 RS-422/485 Serial Port 10 Base-T/100 Base-TX Ethernet Port Independent Serial Ports Provide Virtually Unlimited Integration Methods UL Listed for use in Hazardous Locations. (See literature for class and division details.)

• Weight (lbs): 10 lbs
• Size: 9.0"H x 2.8"W x 13.5"D
• Operating Temperature (F): 59ºF to 158ºF

The fuel tank inerting controller monitors and controls the fuel tank inerting system (FTIS). The FTIS provides protection against fuel tank fire and explosion by creating inert conditions within the ullage space of the fuel tanks. Pressure, oxygen, and temperature data acquired via analog sensors are used by the controller to support the distribution of nitrogen enriched air (NEA) into the fuel tank ullage.

The c015 series is adjacent measuring thermocouples designed for measurement of surface temperature of moving or rolling materials, such as heating rollers, press rollers and running sheets. The thermocouple has the built-in automatic correction circuit for the difference between surrounding air and actual temperature of an object.

• Power Supply: 24 VDC, 2 Amps.
• Dimensions: 270 mm (W) x 178 mm (H) x 100 mm Depth max.

Flame Proof Temperature Indicator a top class industrial controller at an affordable price.!! The series HMI-040 is a perfect replacement to strip chart paper recorders, data loggers andmonochrome displays.

• Type: Motion Controllers
• Material: Aluminium, Plastic, Stainless Steel
• Voltage: 110V, 220V, 240 V
• Application: Industrial
• Power Source: Electric
• Feature: Durable, Light Weight, Low Power Consumption, Stable Performance
• Warranty: 1Years, 2 Years

We are offering temperature controller. Accurate & rugged with 1% tolerance, multiple sizes, multi zone controller available, programmable, universal ip & selectable op & alarm, profile control possible transmitters & converters available too.

• Brand Name: AMT
• Body Material: ABS
• Color: Black
• Power: 3-6kw
• Power Source: Electric
• Certification: Ce Certified
• Voltage: 24vdc
• Type: Dc Controller
• Frequency: 50hz
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 5 Years
• Country of Origin: India

Produced out of premium grade supplies, our entire range is quality assured and conforms to global industry standards. As, our organizations is a suppliers of CNC Machine Controller; purchasers can place wholesale orders for it, and get them at the lowest prices.

SIXSENSE offers complete system for molten metal temperature measurement which consists of SENSE-1800 (Molten metal indicator in 2” /4 “) SRD-1800 (Remote Jumbo Display) SLC-1800 (Traffic Light Indicator) Foundry Master Computer Software

• Type: Thermocouple
• Material: Stainless Steel
• Length: 2.5mtr, 3.5mtr, 3mtr, 4mtr
• Application: Industries
• Power Source: Electric
• Feature: Durable, Fine Finished, High Strength, Quality Tested, Reliable
• Tenmperature: 0-100 Deg C, 100-200 Deg C, 200-300 Deg C, 300-400 Deg C, 400-500 Deg C
• Power Source: Electric
• Material: Stainless Steel
• Surface Treatment: Powder Coated
• Frequency: 50 Hz
• Temperature Range: 0-200 Degree C
• Voltage: 220 V

We are offering electronic pressure controller. * netel gas chromatograph model chrom lite gc-3000a with single flame lonization detector, with one packed or one splitsplit-less injection port. * electronic pressure controller (epc) provides excellent performance with capillary columns. *3 independent heated zones up to 400 c for individual control of injector, detector and oven. *higher sensitivity flame ionization detector requires no make up gas due to unique zero dead volume design. *32 keys for setting of the parameters & eight status l.e.d. Indications including oven ramp status. * pc control communication with rs. 232.

• Large Memory: 128KByte Data Memory
• Connectivity: EtherNet
• EtherNet Port: 10/100Mbps
• Security: Powerful Password Protection
• Compatibility: Win XP/Vista/7(32/64bit)
• Performance: Optimum

ATS is a full service fire sprinkler and low voltage contractor. We have dedicated inspectors who are certified to inspect fire pumps, fire sprinkler, fire hydrant, and fire alarm systems. Our fire pump inspectors comply with the code requirements of the National Fire Protection Association (NFPA) 25, NFPA 72, state requirements, and city and county local ordinances. Upon completion of an inspection, ATS will provide your staff with a detailed inspection report. Our electronic inspection record systems gives us the capability to know when future inspections are due; we will call to schedule the inspection to insure your system is within guidelines.

• Size: 36mm x 72mm
• Supply Voltage: 85 to 270V AC/DC

Display Type: 7 Segment LED, Single Display, Display Configuration: 2 ½ Digits, Type of, Input : NTC type sensor, Type of Output: RelaySSR.

• FEATURES: Over-pressure monitoring system • Independent and isolated analog backup channels to monitor temperature • Built-in-test to check the system and controller health
• Weight (lbs): 10 lbs
• Size: 9.0"H x 2.8"W x 13.5"D

The fuel tank inerting controller monitors and controls the fuel tank inerting system (FTIS). The FTIS provides protection against fuel tank fire and explosion by creating inert conditions within the ullage space of the fuel tanks. Pressure, oxygen, and temperature data acquired via analog sensors are used by the controller to support the distribution of nitrogen enriched air (NEA) into the fuel tank ullage.

• Brand Name: DPM
• Material: SS
• Accuracy: +/- 2.2 DegreeC or +/- .75%
• Features: High efficiency, Optimum quality ,Accuracy
• Measurement System: Degree Celsius and Fahrenheit
• Extended Length: 2.00 meters
• Temperature measurement range: -328 to 932 DegreeF (-200 to 500 DegreeC)

    FEATURES * HMI* I/Os (upto 50) * 1 Analog Input*  MODBUS Communication* 24 VDC to drive inputs* Encoder Input   APPLICATIONS * Heating*  Loading & unloading of material*  Close loop operation* Chemical Process*  Industrial Process   DESCRIPTION programmable logic controller(PLC) is an electronics device which is used for automation purpose's.in industry PLC is used for automation purpose's such as control of machinery.in comparison to general purpose computer's PLC has various advantages like immunity to noise,less effect of vibration,can work in dusty conditions and extended temperature range.

FEATURES: Programmable sensor inputs enable the simple connection of numerous sensors Up to 5 alarm outputs (relay, SSR or norm signal).2- or 3-point controller,3-point-step controller as well as PID controller.Safe heater break function.Digital control inputs for external set point setting.RS 485 interface, MODBUS protocol.Programming adapter for easy transfer of operating data. AUTOTUNED , MICROPROCESSOR BASED DIGITAL CONTROLLER PID control function2- and 3-point control function3-point-step control MEASURING INPUTS Resistance thermometer Pt100Semiconductor PTC / NTCThermocouples J, K, S, B, E, L, N, R,T,CVoltage signals 0...50 mV, 0...60 mV NORM SIGNALS 4...20 mA0...10 V OUTPUTS Max. 4, up to 2 x control- resp. 3 x alarm-output possibleRelay SPST 5 A / 2 A / 250 VacSSR drive 14 Vdc/ 7 mA (20 mA) NORM SIGNALS (CONTROL OR SIGNALS) 4...20 mA0…10 V DISPLAY 4-digits 7-segment LEDs 2-lines Process value red, 7 mm high Set value green, 7mm high.