RCC Material Dealers in Mahape, Navi Mumbai

KEM SUPLAST 101 S is a sulphonated naphthalene formaldehyde based superplasticizer enables the concrete to achieve following parameters:High retention in workability. Good cohesion and homogenity. Less bleeding and segregation. Increased durability.

(HRWRA, conforms to IS 9103-1999 (Amendment 2003) and ASTM C 494 Type G) KEM SUPLAST 101 S is a sulphonated naphthalene formaldehyde based superplasticizer enables the concrete to achieve following parameters:High retention in workability. Good cohesion and homogenity. Less bleeding and segregation. Increased durability.

Concrete blocks use mix of cement, sand, stone chipcrusher dust with low wc ratio suitable for moulding in block making machines. These mixes have very low work ability. It improves the work ability and homogeneity of the mix which help in attaining higher density of blocks when pressed in block machine or hand operated machines or cast at site in steelwooden moulds.

• Packaging Type: 250/200/50kgs. Drum.
• Appearance: Light Brown / Yellowish liquid
• SP. Gravity: 1.20 to 2.02
• pH: 7+1
• Chloride Content: NIL
• Air Content: <0.5%
• Normal Temperature: Around 28C
• Self Life: 12 Months
• Storage: Under Shed

PCP I00 IOIL h light brown/yellowish coloured polycaboxylic ether based new generation hyper plasticier confirming to EN specification, developed for specitic application in high performance concrete.The hyper dispersion effect products by PCP EASE 101L. Exhibits better durability and performance in concrete. PCP EASE 101L is compatible with all portland cement and pozzolonic materials confirming to international standards.Advantages Increases early and ultimate compressive strength. Make higher E modules. Imparts better resistance to carbonation and aggressive atmospheric effects. Reducces permeability. Reducces shrinkage and creep. Increases durability of concrete. Places concrete with zero vibration -reduces labour cost. Primary appliction areas Rheodynamic concrete self consolidated concrete OPC-Pozzolana concrete High volume fly ash concrete Dosages / Uses PCP EASE 101L in the range of 0.3 to 1%  by weight of cement. The dosage can be enhanced to further 3% as per requirements, but it is advisable to go for trial mix to determine the optimum dosage. The Requisite of CIS LPC-111 Should be added after addtion of minimum 50 tom 70% of gauging water before mising with wet cement aggregate system. SafetyPCP EASE 101L is non toxic, non flammable and non hazardous, However, any splash on the human bosy should be washed out immediately with plenty of waters.

• Type: Concrete Additives
• Application: Concrete Use
• Shelf Life: 1 Yr
• Form: Powder
• Content: 98.0%
• Moisture: 3%
• Packaging Size: Plastic Bags
• Country of Origin: India

vitcon 9005 sf is a filter powder generated from the reduction of high purity quartz – ferrosilicon metals or silicon metals. vitcon 9005 sf consists primarily of very fine smooth spherical silicon oxide particles. when vitcon 9005 sf is added to concrete, it changes the rheology and reacts with the cement hydration products to dramatically improve physical properties of concrete like strength, durability and impermeability.

• Brand Name: Homesure
• Purity: 99%
• Country of Origin: India
• Form: Liquid
• Packaging Type: Drum
• SKUs: 230kg
• Specific Gravity: 1.15 ± 0.05
• pH: 6 - 8
• Chloride Content: Max. 0.1 %

Features: Enables a modification of the flow properties & rheology of mortar & concrete. Increases the viscosity & cohesiveness of the concrete mix. Reduces concrete bleeding. Reduces segregation in high water cementitious & high slump mixes. Aids in concrete mix stability with gap-graded aggregates. Can be introduced at the batch plant or job site.   Benefits & Advantages: For SCC Excellent Stability Setting of Concrete Easy to Disperse Enhanced Pumpability and Finishing

Shopper be is into supplying building material ,industry tools and home decors across india. Our aim is to be one stop solution for all your building material, furnitures, gardening tools, electronic security and safety tools at a best price.

• Application: Construction
• Grade: 20/40
• Color: Brown
• Packaging Type: HDPE Bags
• Hardness: 3-6mohs
• Packaging Size: 25kg, 50kg

Our Multipurpose Solid Fuel Additive is a free flowing powder treatment designed primarily for treating coal, wood and other solid fuels. It acts as combustion catalyst and thereby loss due to unburnt fuel gets minimized resulting in improved combustion efficiency. It has an anti�fouling agent that helps to keep heat transfer surfaces clean and thus improves the steam generation for same heat transfer area. It softens the hard clinker and reduces the tendency of hard clinker formation, thus helps in reducing the boiler maintenance, provide ease in cleaning and increase the boiler availability for long term operation. It promotes smoke free combustion at lower excess air levels, resulting in improved fuel economy.

• Brand Name: TIGER FLATE PLASTER OF PARIS

We offer Plaster of Paris that is widely used to design and protect ceiling and walls. Plaster of Paris is resistant to fire and can protect buildings from large damage and destruction. We offer Plaster of Paris of the finest quality. We make available Plaster of Paris in suitable packaging in different quantities. Definition : Plaster was a common building material for wall surfaces in a process known as lath and plaster, whereby a series of wooden strips are covered with a semi-dry plaster and then hardened into surface. The plaster used in most lath-and-plaster construction was mainly lime plaster. Lime plaster cure time is about a month. To stabilize the lime plaster during curing, small amounts of Plaster of Paris were mixed into the putty*. Because Plaster of Paris sets quickly, "retardants" were used to slow setting time enough to allow workers to mix large working quantities of lime putty* plaster. A modern form of this method uses expanded metal mesh over wood or metal structures, which allows a great freedom of design as it is adaptable to both simple and compound curves. Today this building method has been partly replaced with drywall, also composed mostly of gypsum plaster. In both these methods a primary advantage of the material is that it is resistant to a fire within a room and so can assist in reducing or eliminating structural damage or destruction provided the fire is promptly extinguished. Plaster moulding is made using a sliding jig that holds a die with a cross section of the Moulding. *Putty as Known as Whiting Kaolinite China Clay, it is for chalk powder Application : Plaster of Paris forms the basis of many commercial, Plasters used for interior decoration as House, Office, Building. As a false ceiling, studio sets etc. Precaution to be taken before & during usage of product : Take a water for mixing with plaster of paris as volume ratio 60 ml water 100 gms powder. After mixing this product apply on a wall with steel plate to make level or fill hole of wall. Setting time is 3 minutes as final setting time is 10 minutes. Packing list : 1 kg, 2 kgs, 5 kgs, 20 kgs

• Type: LIQUID
• Brand Name: ACI
• Application: CONSTRUCTION
• CAS No.: 3824
• Purity: 99%
• Condition: GOOD
• Appearance: WHITE
• Application: CONSTRUCTION
• Packaging Size: 225 Kg
• Form: Liquid
• Application: Set-retarding,Air-entrainment, Water-reducing
• Condition: Good
• ASTM C494: Type A, B & D
• Applications: Industrial

• Shelf Life: 1yr
• Color: White
• Form: Powder
• Packaging Size: 20Kg Bag, 25Kg Bag
• Purity(%): 90 %
• Calcium (%): 56 %
• Features: Finely grained Water soluble Highly stable

We offer Quartz Grit. The most popular sizes of our High Purity Quartz Grits and Filler are as under: 0.1 to 0.4 mm 0.3 to 0.7 mm 0.6 to 1.2 mm 1.2 to 2.5 mm 2.5 to 4.0 mm 4.0 to 6.0 mm 0.8 to 0.15 mm 38 Microns

Refractory Mortars are finely ground refractory materials which become plastic when mixed with water. Theses are used to bond the brickwork into solid unit, to provide cushion between the slightly irregular surfaces of the brick, to fill up spaces created by a deformated shell, and to make a wall gas –tight to prevent penetration of slag into the joints.

• Country of Origin: India
• Type: sand
• Color: white
• Condition: New
• Function: All Types Of Construction Work
• Automatic Grade: All
• Packaging Type: Bags
• Application: All Types Of Construction Work
• sand: good Quality

Gujarat Sand Price is Rs. 105 par Bags 50 kg  to as per location. 100% pure Gujarat Sand, rate will be negotiable as per loaction and requirements.

• Size: 4*4
• Color: Black
• Shape: Standard
• Thickness: 16 MM,20MM,22MM,25MM
• Brand: JollyBoard
• Usage/Application: Road Construction

VITCON 9013 AFS is a high performance, alkali free powder accelerator for dry shotcrete mix. This product is formulated to increase the rate of hardening of cement and concrete mixes and this can be controlled by varying the dosage to the sprayed concrete. VITCON 9013 AFS helps to improve productivity by shortening the time between each subsequent layer of sprayed concrete.

Alumina castables Excellent mechanical performance in all temperature range High refractoriness and lot properties Improved volume stability.