Reaction Vessels Dealers in Rabale, Navi Mumbai

Heavy fuel oil has been homogenised successfully for many years. This process considerably improves the fuel quality and results in a better combustion. The homogeniser breaks up the long asphaltene chains in the fuel and enables these to be burnt accordingly. Several ship owners have reported 1% fuel savings and it is also possible to use the LEMAG FQI to reduce sludge by approx. 50%.

The insulation of pharmaceutical vessels is done to preserve the temperature inside the vessels. These vessels are of irregular shape. For void free insulation and to avoid sweating over the surfaces proper insulation is required. Insulation properties of polyurethane foam are much better than other insulating material hence it is preferred over other insulating materials. Cladding is done over the vessels using various surfaces such as • GI Pre coated • Aluminium • SS Thickness of insulation varies as per the ambient temperature and the internal temperature of the vessel to be maintained. The density of Polyurethane foam insulation is maintained around 40kg/m3. Higher densities are also achieved as per the requirement of the customer. PIR can also be used as an insulating material. Dual insulation can also be done as per requirement of customer.   Advantages with in-situ foaming system:: • The risk for voids in the insulation is eliminated by the spray method • No joints in the foam • Homogeneous insulation • Increased insulation efficiency • Increased tightness • None-corrosive and watertight cladding • Complete bonding to all surfaces • No penetration or space for accumulation of moisture • Excellent corrosion protection • Good fire fighting properties • Easy to Insulate Uneven Surfaces, Corners, Supports and Odd Geometrical Shapes

Capacity: 10 litres to 20,000 litres Application: To conduct various types of reactions multipurpose reaction assembly like esterification, etherification, nitration, alkalisation, hydrolysis, hydration, dehydration, sulphonation, reduction, oxidation under alkaline conditions, condensation, polymerisation etc. We are certified manufacturer, exporter and supplier of multipurpose reaction assemblies as per the client’s requirements and need since 1990. Working Principle Multipurpose Reaction Assembly The unique design allows the following unit operations to be conducted efficiently. Solvent recovery, distillation, liquid-liquid extraction, phase separation, dissolution, de-emulsification, heating, cooling, blending, degassing, flash distillation etc. Efficient condenser allows complete condensation of vapours and minimises losses. The subcooler, receiver and vapour trap facilitates recovery of all the material by distillation under reduced pressure. The limpet and the internal coil is provided for cooling as well as heating. The system is designed to facilitate conducting reactions under auto pressure / reduced pressure / under inert atmosphere under subzero temperature as well as temperatures up to 300 C.

We manufacturer pressure vessels for Air and Gas systems.

Capacity: 10 litres to 20,000 litres Application: To conduct various types of reactions multipurpose reaction assembly like esterification, etherification, nitration, alkalisation, hydrolysis, hydration, dehydration, sulphonation, reduction, oxidation under alkaline conditions, condensation, polymerisation etc. We are certified manufacturer, exporter and supplier of multipurpose reaction assemblies as per the client’s requirements and need since 1990. Working Principle Multipurpose Reaction Assembly The unique design allows the following unit operations to be conducted efficiently. Solvent recovery, distillation, liquid-liquid extraction, phase separation, dissolution, de-emulsification, heating, cooling, blending, degassing, flash distillation etc. Efficient condenser allows complete condensation of vapours and minimises losses. The subcooler, receiver and vapour trap facilitates recovery of all the material by distillation under reduced pressure. The limpet and the internal coil is provided for cooling as well as heating. The system is designed to facilitate conducting reactions under auto pressure / reduced pressure / under inert atmosphere under subzero temperature as well as temperatures up to 300 C.

The pressure vessels, which we deliver, are manufactured using supreme-grade steel which ensures the high mechanical strength of the vessels. The double layer walls of the vessel prevent the rupture due to excessive pressure. We make available pressure vessels in bulk quantities, at market leading prices.

• Application: Power Factor Correction lead to Unity
• Input Voltage: 110-660V
• Standards: IEC, and IS standards
• Phase: Single Phase, 3 Phase
• Voltage Type: AC, DC
• Features: Tailor made, Rugged construction, Low noise, Long life

We at TRANSPOWER have an extensive record as a trusted manufacturer of wide range of Transformers (which includes Oil filled, VPI and Cast Resin), reactors/chokes, CTs, PTs & coils to cater different industries as per the applications & specifications of customers. As we are committed to customer satisfaction by providing wide range of power solutions, we had great interaction with different field customers with their challenging requirements. Our organisation core competency got evolved over the years to benchmark ourselves against global leaders by utilizing strategic combination of our last 30 years’ experience, design capabilities, innovative ideas. Further this helped us to have better access to most advanced magnetic & insulating materials to provide our customers quality products with optimum cost. Presently we design, develop, produce and deliver wide range of high quality Magnetics as per international standards. Transpower India Electronics is having well established infrastructure to produce wide range of Reactors, Inductors for different applications as per IEC, and IS standards. Transpower India Electronics is having well established infrastructure to produce wide range of Reactors, Inductors for different applications as per IEC, and IS standards. Dry type Reactor is a necessity component in the power quality management, supressing unwanted harmonics and signal shaping hence the loss reduction which could be translated in an overall cost reduction, mainly in industrial applications. Vacuum Pressure Impregnated Reactors are generally used for low voltage and to some extent medium voltage applications. In certain applications particularly in medium voltage cast resin reactors are used. TIE AC reactors intended for series connection in a system for limiting current or for load sharing purposes are available in wide range of current rating and inductance value. DC reactors to filter out all harmonics present in DC power systems of high or low system voltages are available. Supressing harmonics of any frequency range with less core loss is an essence in our DC reactor designs.   TIE manufacturing scope for reactors and Inductors: As per IS 5553 part 1 to 5, Single Phase or 3 Phase VPI or Resin cast AC Reactors which includes: Output Reactors for Harmonic Suppression Line Reactors Shunt Reactors Sine filter reactors DC Reactors High Frequency Reactors Air Core Reactors   Range: Up to 22KV Up to 3000A with or without enclosures (IP series) Salient Features: Tailor made as per customer requirement for wide range of applications. Optimum design Rugged construction Low noise Long life

• Capacity: 10 litres to 20,000 litres

Application: To conduct various types of reactions multipurpose reaction assembly like esterification, etherification, nitration, alkalisation, hydrolysis, hydration, dehydration, sulphonation, reduction, oxidation under alkaline conditions, condensation, polymerisation etc. We are certified manufacturer, exporter and supplier of multipurpose reaction assemblies as per the client’s requirements and need since 1990. Working Principle Multipurpose Reaction Assembly The unique design allows the following unit operations to be conducted efficiently. Solvent recovery, distillation, liquid-liquid extraction, phase separation, dissolution, de-emulsification, heating, cooling, blending, degassing, flash distillation etc. Efficient condenser allows complete condensation of vapours and minimises losses. The subcooler, receiver and vapour trap facilitates recovery of all the material by distillation under reduced pressure. The limpet and the internal coil is provided for cooling as well as heating. The system is designed to facilitate conducting reactions under auto pressure / reduced pressure / under inert atmosphere under subzero temperature as well as temperatures up to 300 C.

Reactor Vessels, Overlay Nozzle, Air Preheater, Ventuary

• Material: FRP
• Finish: Polished
• Capacity: >10000 L, 100-500 L, 1000-10000L, 500-1000 L
• Max Design Pressure: 0-10 bar
• Features: Level/Pressure Indicator, Verical Orientation, Horizontal Orientation
• Automation Grade: Automatic

Stainless Steel Reaction Vessel, Bio Diesel Distilation Tank, blending vessel

• Voltage: 220 V
• Capacity: 2-3 KL
• Max Temperature: 300 degree Celsius
• Max Pressure: 3-6 kg
• Frequency: 50 Hz
• Finishing: Color Coated

• Color: Blue
• Capacity: 48 Ltrs
• Material: HDPE
• Shape: Rectangular
• Style: Mesh
• Usage/Application: Industrial
• Storing Material: Edible

We are main suppliers of this product.

Our High Performance Agitator Reactors are designed using Magnetic drive couplings or Conventional Single / Double Mechanical Seals depending on the application. We have designed and manufactured Reactor Systems with External / Internal coils for Heating & Cooling applications. Our Reactors are capable of operating upto 200bar Pressure and 600oC Temperature and are built from materials like SS 316L, Hastelloy [C-276], Monel, Inconel, Nickel etc. We have also manufactured and supplied several Cladded Reactors for our various clients within India and abroad. Our Reactors are regularly used in various applications like Fluorination, Hydrogenation, Sulfonation etc.

• Feature: All tanks and vessels are built in a dedicated hygienic area

We follow the highest standard factory acceptance testing, including material identification, Ra testing, Riboflavin test, Spray ball testing and Hydro testing. We include full documentation packages with weld inspection reports and Ra mapping.

We supply various types of process vessels and storage tanks for Pharma, Biotech, Food & Dairy and Chemical Industries. While designing we keep in mind the unique requirement of each industry and provide a suitable design from laboratory to commercial scale. Salient features of Process Vessels Pressure Vessel Design as per ASME design with cGMP and / or ASME BPE standards. Sterile process vessels for pharma & biopharma application. Self supported, skid mounted as well as mobile trolley units. MOC: SS 304 / L, SS 316 / L PVDF, PTFE, Hallar coated vessels as per process requirements.. Jacket (Plain / Limpet) can be provided optionally. Agitator can be provided optionally. Accessories like Load cell, Level Transmitter, Temperature controller, pH Controller, Conductivity meter can be provide optionally. Typical Application Areas Storage tanks for purified water & WFI Buffer tanks Hold tanks Pressurized vessel for solvents / sterile products Agitated pressure vessels for various applications Reaction vessels

Pressure Vessels, Agitators, Heat Exchangers, Reactors, Storage Tanks