Rotary Dryers Dealers in Navi Mumbai

Operating Principle Granular free flowing wet feed material is made to shower repeatedly in a cascade manner in a stream of hot air, when moisture gets transferred to the air, rendering the product progressively dry as it travels the length of the dryer cylinder provided with suitable lifters. The humid air is exhausted via a dust collection system to trap any fines escaping with the exhaust air.   Special Features of Rotary Dryer : Suitable for free flowing granular feeds. Intimate contact with air results in uniform drying Large evaporation capacities. Gentle drying High thermal efficiency Low power demand Continuous operation

• Brand Name: Promas's rcvd, rota cone dryer
• After-sales Service Provided: we are always there to help our beloved customers

Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator.

• Capacity: 5 Litres to 5000 Litres

Application: Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator. Promas Engineers is a certified company for manufacturer, supplier and exporter of rotary double cone vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Rotary Double Cone Vacuum Dryers Raw material is charged in batches & is subjected to indirect heating while at the same time undergoing rotary motion of the cone assembly. The conical shape of the dryer ensures efficient circulation of hot liquid heating media. Drying takes place when heat flows from outer cone through a jacket, and vacuum is applied in the inner cone. The drying operation is based on the principle that water or other volatile product moves from a zone of low pressure. This is accomplished by warming the product to be dried to raise the vapour pressure of the absorbed or free liquid by vacuum or by sweeping it with Air or Nitrogen current. Thus the essential conditions for effective drying are achieved by uniform heat transfer throughout the batch and rapid removal of the vapour. The vacuum is applied gradually with PLC control by throttling. Our Specialities Creating innovative and cost effective designs as per your requirement to give you maximum and best output from our equipment Providing Lab Models in exactly the same material to give the accurate results Design and supply of entire turnkey projects at any scale, from 500 kgs to 20,000 kgs capacities. Promas Engineers Rotary Double Cone Vacuum Dryer is unique in removing complete water, or other solvent from wet powders coming from a filtration unit or a centrifuge. It can be used as an effective dryer, fast mixer & blender or homogenizer. It can also be used as a granulator. The drying time is substantially reduced because of high-speed choppers, which help the evaporation of the solvent or moistures. Chopper speed can be controlled by a frequency drive. Dryer are manufactured as per “US-FDA” Standards & Regulations. Salient Features Rotary Double Cone Vacuum Dryers Low temperature drying under vacuum Higher Thermal Efficiency Specially designed micro air-filter can be provided on receiver while breaking vacuum for safety operation Nitrogen purging system is available optionally for mechanical seal as well as for cleaning filter Specially designed S.S. Rotary union is provided for hot water or steam at inlet & outlet Direct drive with hollow shaft gear to suit cGMP operation & to avoid greasing of the gear. The gear box with only one time of oil fill for lifetime Lowest energy consumption compared to any other batch type dryer due to higher differential temperatures Available in STD/GMP/cGMP/ Lab Models and kilo lab models Why RCVD? Suitable for drying of materials which cannot resist high temperature. Material which are easily oxidized Specialty chemicals Volatile Materials which should be retrieved Materials which are strong irritants and poisonous in nature Solvents which need to be recoverer Advantages: Reduces drying time. Total contained process, dust control. Efficient Charging and Discharge. Choppers (Lump Breaker) give lump free product. Easy Open-able charging port. Eliminates need for re-drying of lumps. Handling and exposure of final product is avoided. Gives uniformity size dry product. System can process crystalline or amorphous powders which are prone for lumps. Easy to clean internal surface, thus ensuring purity of product. Optimum and Continuous vacuum maintenance during process. Uniform material shuffling over the heated contact surface of the cone.

• Brand Name: Ankita Technologies (I) Pvt. Ltd.
• Automatic Grade: Automatic
• Minimum Order Quantity: 1 Unit

Rotary dryers, Low temperature drying under vacuum, Specially designed micro air-filter can be provided on receiver while breaking vacuum for safety operation, Specially designed S.S. Rotary union is provided for hot water or steam at inlet & outlet, Direct drive with hollow shaft gear to suit cGMP operation & to avoid greasing of the gear.

The Rotary Drum Flaker consists of a cylindrical drum, having provision for cooling drum surface. One end of the drum shaft is connected to a gear box which is driven by a motor. The heating cooling media will be circulated in drum during operations, the drum rotates at a slow speed. A thin layer of the product to be dried / cooled, adheres to the outside of the rotating, drum and internally cooled drum. The product gets solidified and is after an almost complete rotation, scrapped off drum surface and at the same instant granulated in the form of flakes, falls on screw conveyor. At the bottom of conveyor, filling point is provided to fill the bag. The entire process is continuous operation, does not require manpower except bag filling. Pneumatic / hydraulic operation of scraper assemblies can be provided.

Capacity: 5 Litres to 5000 Litres Application: Rotary double cone vacuum dryers are suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. The equipment can also be used as rotary evaporator. Promas Engineers is a certified company for manufacturer, supplier and exporter of rotary double cone vacuum dryers according to ISI guidelines and user’s requirements since 1990 from Mumbai to India and all over the world. Working Principle Rotary Double Cone Vacuum Dryers Raw material is charged in batches & is subjected to indirect heating while at the same time undergoing rotary motion of the cone assembly. The conical shape of the dryer ensures efficient circulation of hot liquid heating media. Drying takes place when heat flows from outer cone through a jacket, and vacuum is applied in the inner cone. The drying operation is based on the principle that water or other volatile product moves from a zone of low pressure. This is accomplished by warming the product to be dried to raise the vapour pressure of the absorbed or free liquid by vacuum or by sweeping it with Air or Nitrogen current. Thus the essential conditions for effective drying are achieved by uniform heat transfer throughout the batch and rapid removal of the vapour. The vacuum is applied gradually with PLC control by throttling.     Promas Engineers Rotary Double Cone Vacuum Dryer is unique in removing complete water, or other solvent from wet powders coming from a filtration unit or a centrifuge. It can be used as an effective dryer, fast mixer & blender or homogenizer. It can also be used as a granulator. The drying time is substantially reduced because of high-speed choppers, which help the evaporation of the solvent or moistures. Chopper speed can be controlled by a frequency drive. Dryer are manufactured as per “US-FDA” Standards & Regulations. Salient Features Rotary Double Cone Vacuum Dryers Low temperature drying under vacuum Higher Thermal Efficiency Specially designed micro air-filter can be provided on receiver while breaking vacuum for safety operation Nitrogen purging system is available optionally for mechanical seal as well as for cleaning filter Specially designed S.S. Rotary union is provided for hot water or steam at inlet & outlet Direct drive with hollow shaft gear to suit cGMP operation & to avoid greasing of the gear. The gear box with only one time of oil fill for lifetime Lowest energy consumption compared to any other batch type dryer due to higher differential temperatures Available in STD/GMP/cGMP/ Lab Models and kilo lab models Why RCVD? Suitable for drying of materials which cannot resist high temperature. Material which are easily oxidized Specialty chemicals Volatile Materials which should be retrieved Materials which are strong irritants and poisonous in nature Solvents which need to be recoverer Advantages: Reduces drying time. Total contained process, dust control. Efficient Charging and Discharge. Choppers (Lump Breaker) give lump free product. Easy Open-able charging port. Eliminates need for re-drying of lumps. Handling and exposure of final product is avoided. Gives uniformity size dry product. System can process crystalline or amorphous powders which are prone for lumps. Easy to clean internal surface, thus ensuring purity of product. Optimum and Continuous vacuum maintenance during process. Uniform material shuffling over the heated contact surface of the cone.

  RVD's have a wide range of application in pharmaceutical, dyes/dye intermediates, inorganic chemicals, agrochemicals, organic chemicals, and other allied industries.   We manufacture agitated RVD with or without internally heated shaft, depending upon the heat transfer requirements. We manufacture RVD's with external heating both through jacket/limpet coils. The scrapper plates provided scraps almost 100% of the inner surface of the shell to ensure efficient separation. The discharge valve and charging doors may be both manual and pneumatic/hydraulic type. They are provided with either mechanical steels of stuffing box depending upon the applications.

• Brand Name: PROMAS

we are offering rotary double cone vacuum dryer. applications rcvd is suitable for drying & mixing powder (raw materials), pharmaceutical materials, crystalline products, insecticides, pesticides, food products & also for heat sensitive products. the equipment can also be used as rotary evaporator

• Power: Electric Current
• Material: Mild Steel
• Color: Green
• Voltage: 440 V
• I Deal In: New Only

rotary vacuum tray dryer, chemical processing plants

Rotary Cone Vacuum Dryers, 812 inches Air Jet Mill, Colloid Mill