Seal Machines Dealers in Ghansoli, Navi Mumbai

• Shelf Life: 1 Yr
• Form: Liquid
• Packaging Type: Can
• Packaging Size: 400 ml

Features of BPS 4536 Battery Protector And Sealer BPS 4536 Battery Protector & Sealer is an aerosol product for sealing and coating the terminals of a battery and eliminating the formation of acid salt corrosion that is typically found when terminals are untreated. Battery Protector is designed to protect battery terminals from corrosion, the leading cause of battery failure, and to maintain the batteries peak performance level. Battery Protector provides a dry, lead-free protective coating that keeps moisture, salts and road grime from corroding metal contacts. It maximises performance, provides long lasting protection and extends battery life. Prevents battery drain  Improves electrical flow   Application of BPS 4536 Battery Protector And Sealer Battery protector used in Batteries Cables Terminals   Direction of BPS 4536 Battery Protector And Sealer Product should be sprayed in a well-ventilated area. Clean parts to be treated with RMC Battery Cleaner Shake can with ball agitator for one minute. For best results, aerosol can should be at room temperature before spraying. Holding can 8 to 10 inches from the surface to be coated, press the nozzle and discharge the product onto the terminal areas. The product discharges as a heavy film. 5. For best results, apply two light coats.   Precaution of BPS 4536 Battery Protector And Sealer Contents are Extremely Flammable and Under Pressure, Prevention Avoid breathing dust/fume/gas/mist/vapors/spray Use only outdoors or in a well-ventilated area Wash face, hands and any exposed skin thoroughly after handling Wear protective gloves/protective clothing/eye protection/face protection Keep away from heat/sparks/open flames/hot surfaces. – No smoking Do not spray on an open flame or other ignition source Pressurized container: Do not pierce or burn, even after use Precautionary Statements – Response If exposed or concerned: Get medical advice/attention Specific treatment (see supplemental first aid instructions on this label) If in Eyes : Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing If eye irritation persists: Get medical advice/attention If skin irritation occurs: Get medical advice/attention If On Skin (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower Wash contaminated clothing before reuse If Inhaled : Remove victim to fresh air and keep at rest in a position comfortable for breathing If Swallowed: Immediately call a POISON CENTER or doctor/physician Do NOT induce vomiting. Dispose of contents/container to an approved waste disposal plant   Storage of BPS 4536 Battery Protector And Sealer Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8_ to 28_C (46_ to 82_F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. Store locked up. Protect from sunlight. Store in a well-ventilated place.keep container tightly closed. Keep Out of Reach of Children

Vertical form-fill-seal machines make and fill pouches vertically. It's mostly utilised for industrial packaging and processing, reducing time, material, and cost.

Carton sealing machine, Carton sealer, and Carton taping machine: Auto carton sealer is suitable for carton packing, which can be used for single use or production line. It adopts adhesive tape to seal carton, economy and fast, easy adjust. It can finish the sealing both top and bottom. Also you can adjust the height and width for different cartons. It widely used in home appliance, textile, food, general merchandise, medicine, chemical and so on.

Flow wrap servo model manufacturer   Product to be filled This model is suitable for packing various solid products having fixed shape and carrying edge single or piled together namely cake, bread, biscuits, candies, sweets, maggi, meat and fish pieces, ice candy bars, cheese slabs, fruits, wet wipes, soap, detergent cake, scrubber pads, bearings, hardware items, files, tablet strips, tubes, sachets, small leaflets, tazo, cards, tattoos, mosquito coils,, bars, chikki, deodorant cakes etc Description of MachineThis machine is Horizontal Form Fill Seal Machine suitable to pack single piece or multiple pieces piled fit on each other. Feeding system is pawl chain conveyer where operator will keep product manually. Auto feeding systems can be fitted on this machine.The film is drawn by two pairs of rollers and also seal the film at the bottom same time. Vertical sealing is driven by servo motor and controlled by photo sensor signal. Sealing system is a continuous heating system. Disc type heaters fitted in the desired size metal. At the folding box packing roll formed in a shape of tube and product is inserted in this tube by feeding conveyer. Product is wrapped by the packing material and carried upto the horizontal sealers.A pair of horizontal sealer then seals and cut the pouch. Packed pouches will come out on out feed conveyer. Technical Information About Flow wrap servo model Main features • This Flow wrap Machine Standard model suitable for all packing material and printed or non printed rolls • Sturdy and vibration free construction • Machine framing in heavy duty mild steel, powder coated • Feeding conveyer and all contact parts will be in S S 304 • Designed for easy cleaning and maintenance • Extreme versatile machine design to accommodate variety of products • Adjustable former and collar assembly in height and well as width of the product • User friendly operations and settings • Separate electrical panel, safety for operator • Electrical wiring easily accessible • Safety features and emergency provided for the operator • Longitudinal sealing done by 3 pair of sealing rollers • Longitudinal sealing driven by servo motor synchronized with print mark sensor for correct pouch length • Safety door interlock (optional) • Transparent acrylic guards provided for all hot and moving parts • Touch screen HMI for easy operations • Self diagnostic failure screens shown on HMI • Pouch length setting given in HMI, saves operator’s time for setting • Variable frequency drive for machine speed variation • Product timing setting on hand wheel at front side • Vertical sealing slow fast feeding setting given at front side • Overload clutch facility to avoid product and horizontal sealer damage • Independent PID temperature controllers for sealing and cutting   Flow wrap Machine outputMaximum speed up to 40 to 200 packs per minute depending on product shape, size, weight and carrying edgeHigh speed models up to 400 packs per minute is also available with 3 servo motor drives Film WidthMaximum 450 mm open width Film roll diameterMaximum 300 mm OD, 75 mm core ID Pouch width50 to 150 mm maximum Pouch lengthMinimum 100 mm to maximum 300 mm Product heightMaximum 50 mm Packing MaterialMachine is designed for most types of Heat Sealable Laminate up to maximum of 300 gauge. Machine controlSimple electrical panel with PID type temperature controllers Main driveMechanical machine horizontal sealers and feeding system synchronized by gears and chain drives interlocked with each other Electrical DataPower supply, 440 VAC, 3 phase with neutral and ground connected or Single Phase as per customer requirement Motor Drive1 Hp, 440 VAC, 50 Hz, 3 phase with reduction gear box Heaters200 Watt X 2 heaters for vertical sealing and 300 watt X 2 heaters for horizontal sealing-cutting Temperature controllerOmron or Selectron or Delta make PID controller Machine size3300 mm X 680 mm X 1750 mm Nett Weight of machine550 Kilogram Optional arrangements • Fully S S machine • Online printing, • Online label applicator, • Pouch take off conveyer, • Auto feeding conveyer • No product no pouch setting • Gusseting arrangement • Nitrogen Flushing   We are leading Flow Wrap Servo Model machine manufacturer and supplier in Navi Mumbai, India. Contact us to know the best price of Flow Wrap Servo Model

• Model No.: MSB11MVI & MSB11MVI ID
• Dimensions: (L) 1100 x (W) 850 x (H) 1730 mm

Vacuum creation in bags before packing Injection of gas following vacuum creation, if desired Automatic sealing of the bag with product, following vacuum gas injection Advantages of creating vacuum in the bag, before packing: Proof of non-perforation Prevention of permeation of humidity and oxygen Prevention of reopening of the bag during shipment Increased shelf-life Sealing length upto1000mm and width 10mm

• Features: Super quiet operations, Excellent thermal stability

Formertron manufactures Shield Ring Taping machine consisting of a Taping head ring closely guided in the ID of an outer ring. The outer ring is mounted firmly on a fabricated and machined base. The outer ring has an opening of a segment and the Taping head has a removable segment for loading of the product to locate it centrally. The taping head is rotated by variable frequency drive (VFD) up to max. 200RPM.

Plastic Extrusion Machinery Components offered by us are extremely durable and corrosion resistant. These components are widely used in engineering and machine tools industries. Our components are known for dimensional accuracy and fine finish.        Intake Drum     Intake Drum offered by us are extremely durable and corrosion resistant. These components are widely used in engineering and machine tools industries. Our components are known for dimensional accuracy and fine finish. We also offer these components to the clients at industry leading prices.

• Weight (lbs/ft): 0.55 to 1.04 lbs/ft
• Voltage (VAC): 120 or 240 VAC
• Cover Color: Black is standard, additional colors available upon request (See How to Specify & Order for details

CS-Continuous Steam Purge Bundles for continuous, high-temperature steam purge up to 1100°F (593°C). Bundles are thermally insulated for freeze protection in operating environments with harsh conditions.

We offer Automatic Single Head ROPP Cap Sealing Machine that has varied industrial applications. Fabricated with the highest level of perfection using premium grade raw materials, Automatic Single Head ROPP Cap Sealing Machine, that we offer, is known for its high performance. Automatic Single Head ROPP Cap Sealing Machine provided by us is in compliance with set industrial standards. Attributes Easy to operateOccupies less floor areaOffers cutting edge performanceEnergy efficient

Accupack is a fast emerging business group offering Engineering solutions for pharmaceutical industries around the world. We are Asia's largest Format parts manufacturers. With experience spanning over 15 Plus Years, we have emerged as trusted partners for several big pharmaceutical companies around in the world in manufacturing and supplying of Format parts for Blister and cartoning Machines. Our offerings also include Blister Packing Machines, Cartoning Machines, Wrapping Machines, Software for Operational Intelligence – PLEXUS. Based out of Navi Mumbai, India, we are a team of more than 225 young & highly qualified professionals. We export our products to over 30 countries worldwide and are fast expanding our reach to other countries too. Our list of esteemed clientele includes more than 450 pharmaceutical companies and is growing steadily and rapidly.

• Finishing: Polished
• Width: 1600
• Machine Weight: 2000-3000kg
• Packaging Type: Wooden Box
• Pressure: Medium Pressure
• Power: 6-9kw
• Usage: Packing Industries
• Specialities: Easy To Operate
• Type: Paper Rewinding Machine
• Brand Name: HR Paper
• Material: Mild Steel
• Certification: ISO 9001:2008 Certified
• Voltage: 440V
• Driven Type: Electric
• Phase: Three Phase
• Country of Origin: India
• Operating Mode: Automatic
• Is It Variable Speed: Yes
• Type: Paper Rewinder
• Certification: ISO 9001:2008
• Color: Grey
• Voltage: 440V
• Power: 9-12kw
• Driven Type: Electric
• Warranty: 1year
• Application: Industrial
• Weight: 3000-4000kg
• Automatic Grade: Fully Automatic

Specification: IS 1367 BS 3692 BS 93 BS 4183 DIN 558,993,961 etc.

• Type: Cap Sealing Machine
• Certification: CE Certified, ISO 9001:2008
• Application: Cap Sealing
• Color: Brown, Grey, Light White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Application: Sealing, Sealing Machine
• Automatic Grade: Automatic, Manual, Semi Automatic
• Driven Type: Electric, Hydraulic, Mechanical, Pneumatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw

Vertical Cartoning

Continuous Band Sealer, Food Processing Machine, horizontal band sealer

ultrasonic plastic sealers, industrial, ultrasonic plastic welders

adhesive tape coating machines, Adhesive Coating Machine

Textile Machinery Components, textile machinery spares parts