Spectrum Paints Rabale, Navi Mumbai, Maharashtra

This is a two pack (part A + part B) zinc-ethyl silicate-type primer. Forms a continuous layer of metallic zinc that provides cathodic protection to metal (as in hot galvanization).In clean or mildly corrosive environments, may be applied in a single 75 microns thick coat. In acidic or alkaline environments, must be coated with a top-coat such as chlorinated rubber, vinyl, epoxy or Polyurethane.

This is a conventional general purpose primer , based on modified alkyd resin having zinc chrome and red oxide as anticorrosive pigment. Recommended Uses Suitable for use on any steel work , storage tanks , bridges etc. This can be overcoated with any type of conventional coatings and also with C.R.,P.U & Epoxy coatings and water based coatings.

This is two pack epoxy primer for metal and concrete surfaces . It has good anticorrosive properties fortified with anticorrosive pigments such as red oxide , zinc chrome , zinc phosphate etc. It is Amine Amide cured coating

It is a two pack Aluminium paint based on special varnish.It has good anticorrosive properties along with dry heat resistance upto 200 °C. This is used as a protective coating for chimneys,spacks, pipelines ,cargo holes etc. Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air, Keep the material away from heat , spark and direct flame ,N Avoid inhalation of solvent vapour or paint mist by using facial mask .Use goggles and gloves to protect against direct contact of paint with skin and eyes., n case of contamination , rinse with fresh running water and seek medical help at once. Thinner consumption and actual coverage of paint depends on the site conditions, Stir the paint well before painting and while painting if necessary.

It is single pack Aluminium paint based on special resin.It has good anticorrosive properties along with dry heat resistance upto 600 °C, his is used as a protective coating for chimneys,spacks, pipelines ,cargo holes etc.

This is two pack epoxy primer for metal surfaces , based on Zinc dust as main pigment . It has excellent anticorrosive properties, Ideally suitable for use on Mild Steel surface for new and old surfaces. It is a very good prefabrication pre-erection primer.

This is a conventional general purpose primer , based on modified alkyd resin having zinc chrome and red oxide as anticorrosive pigment, Suitable for use on any steel work , storage tanks , bridges etc. This can be overcoated with any type of conventional coatings and also with C.R.,P.U & Epoxy coatings and water based coatings.Provide sufficient ventilation while working with solvent based paints in confined spaces and stagnant air.Keep the material away from heat, spark and direct flame , In case of contamination, rinse with fresh running water and seek medical help at once.

This is two pack epoxy primer for metal and concrete surfaces .It has good anticorrosive properties fortifiedwith anticorrosive pigments such as red oxide , zinc chrome , zinc phosphate etc. It is Amine Amide cured coating , Recommended for abrasive blasting to Sa 2 after degreasing and deoiling of the surface. If steel is coated by Shop Primer , clean damages to shop primer and clean the surface free from oil , grease , moisture and any other foreign matter.

This is two pack coal tar epoxy coating for metal surfaces . It has good corrosion , abrasion and water resistance. Recommended Uses Ideally suitable for use in varied conditions for the protection of all types of metals especially for the substrates which are having marine exposure.

This is two pack coal tar epoxy coating for metal surfaces . It has good corrosion , abrasion and water resistance, Ideally suitable for use in varied conditions for the protection of all types of metals especially for the substrates which are having marine exposure.Recommended for abrasive blasting to Sa 2 after degreasing and deoiling of the surface. If steel is coated by Shop Primer , clean damages to shop primer and clean the surface free from oil , grease , moisture and any other foreign matter. Then to be applied on suitable primer coated surface. Maintenance Remove oil , grease etc with a detergent wash . Remove salts and other contaminants by high pressure fresh water hosing. Allow surface to dry before the application. Then to be applied on suitable primer coated surface.

Type : Coal Tar Epoxy Coating Paint

Certification : ISO9001:2008

Application : Brush, Roller, Spray Gun

Color : Multicolor

State : Liquid

Packaging Type : Can

Finish : High Gloss

Packaging Size : 1-5 L, 10-15 L, 15-20 L, 20-25 L, 5-10 L

Application : Industrial use