Surgical Equipment Dealers in Ghansoli, Navi Mumbai

• Material: Stainless Steel
• Material: Galvanized Steel
• Usage: Industrial
• Working Pressure: 150 kgf/cm2
• Inlet Pressure Gauge: 0-280 kg/cm²
• Outlet Pressure Gauge: 0-14 kg/cm²
• Computerized: No
• Control System: Manual
• Length: 300 x 200
• Water Capacity (Litres): 46.7 Litre (D-Type) Cylinder
• Gas Capacity: Min 2 Cylinder

• Brand: Reggitek
• Application: Laboratory
• Dispensing Volume: 250 mls to 1000 mls
• Dispensing Accuracy: The greater of 1% of set volume or ± 5 mls
• Heating Capacity: +20C deg. increase from starting point
• Degassing: Up to a maximum of 3.0 ppm, to an endpoint of not less than 5.0 ppm
• Input Filter: 25 mm in-line fi lter holder
• Temperature Control: Cartridge Heater
• Temperature Accuracy: ± 2°C
• PC Interface: RS-232 (serial) & USB 2.0

• Application:  Clinical, Home Purpose, Hospital
• Assay Method:  Electrochemical Biosensor
• Packaging Type:  Paper Boxes
• Color:  Creamy, Light-green, Sky-blue, White
• Type: Glucometer
• Condition:  New Used
• Driven Type:  Battery Operated
• Automation Grade: Automatic
• Feature:  Accuracy, Easy To Operate, High-low Alarm, Light Weight, No More Coding

Autoclave, Aluminium, Deluxe Quality, with stainless steel Drum ,Pressure cooker type, Electric, 39 Ltrs. \n autoclaves are constructed from heavy gauge aluminum. It’s generates steam under pressure and temperature between 120°C to 135°C.\nMade from seamless Aluminium, top loading autoclaves. Seamless construction ensures bacteria free environment. 25-30 minutes sterilizing cycle at 121º c.,stopcock and pressure release weight valve.\nWith heat resistant handles and steam release / control valve.Pressure Gauge : Colour coded pressure gauge showing internal chamber conditions during the cycle.\nSterilization zone in green colour is shown from 15 psi to 20 psi (OR 1.034 bar to 1.378 bar) which is equivalent to temperature of 121°c to 127°c.Dial size : 2.5". Dial show measurement in 2 units (i) kg/cm² (ii) lb/inch². Full scale dial of pressure gauge is 0-30 lb/ inch² or 0-2 kg/ cm². Caution zone in red colour.Supplied with inner & outer stand.

• Type: Electrosurgical Units
• Brand Name: SHALYA
• Certification: CE Certified, ISO 13485:2016
• Color: Blue
• Condition: New
• Output Type: AC Single Phase
• Frequency: 50 Hz, 60 Hz
• Warranty: 1year
• Cooling System: Natural Cooling
• Noice Level: Non Silent

Followings are the special features of bourdon tube pressure gauge (111.10) : reliable and economical design en 837-1nominal sizes 40, 50, 63, 80,100 and 160scale ranges up to 0…400 bar applications : suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts pneumatics heating, ventilation, air-conditioning medical engineering specifications : nominal size : 40, 50, 63, 80, 100 and 160 mmdesign : en 837-1accuracy class : 2.5movement : cu-alloy click here for more information.

We are the largest manufacturers, exporters, and wholesale suppliers of Fibre Optic Laryngoscope from Mumbai. The Fibre Optic Laryngoscopes are mainly used in hospitals as well as medical sectors where laryngoscope procedure is used. The USP of Fibre Optic Laryngoscope is that it allows no possibility of loose bulb entering oral airway, use of stainless steel disposable blades, strong, secure as well as clear bright light guide, controls infections by eliminating cross infection risks, and they have a strong and rigid finish. For the convenience of the clients, we pack the consignments as per clients requirements, and deliver them safely.

• Shape: Round
• Application: Industrial Use
• Color: Silver
• Voltage: 380V
• Power: 6-9kw
• Driven Type: Electric

• Minimum Operating Temperature (C): -40°
• Orifice Size (mm): 10.4mm to 19.05mm

The Type SRH High Capacity Safety Relief Valves are designed and constructed to meet the requirements of Section VIII ASME Boiler and Pressure Vessel Code and ANSIASHRAE 15 Code requirements and bear the ASME Code Symbol (UV). Safety Relief Valves should be used to protect each refrigeration system pressure vessel that can be isolated by valves. In many localities state or municipal codes govern selection and installation of Relief Valves. Employing proven principles of design, these Safety Relief Valves are highly reliable and dependable. Precision machined moving parts of stainless steel, and a PTFE disc prevent sticking due to corrosion or cold welding and assure valve opening at the set pressure long after installation. They are not suitable for corrosive ambient atmospheres such as chlorine, etc.

STAINLESS STEEL 304 GRADE TANK : Inner body of high-quality stainless steel of 304 grade. STEM TYPE THERMOSTAT : Switches o automatically when the water reaches pre-set temperatures. FUSIBLE PLUG In the event of other safety devices failing, the fusible plug melts and releases hot , water and steam through the drain pipe. SAFETY VALVE Prevents exceeding of pre-set inlet rated , pressure by opening the passage for water , to flow out through the drain pipe. ABS (RUST-PROOF) BODY Outer casing is made of superior quality, , sturdy, rust-proof ABS plastic., CLASS 1 WITHSTANDABLE PRESSURE Heavy guage material is suitable for , highpressure applications such as pressure pumps and high rise buildings.

With the advent of delicate packaging material for food products and beverages there is a need to install a heat treatment and sterilization systems which offer you very high versatility without compromising on the sterility assurance. The flexible packaging materials and wide variety of closures used today does not allow the use of conventional Steam Retorts. The steam sterilization process employed here will result in total or partial destruction of these packaging materials. Machinfabrik offers you a Steam-A

Having received acclamation from all quarters, we, a Manufacturer and Supplier, rank among the top names in the industry. Air Header on offer is available in a wide selection designs and sizes. It is manufactured using superior technology and high tech machinery. Our audit team works hard to keep the quality in synchronization with industrial quality standards. Durability, low maintenance and ease of installation make the offer irresistible. Lay your hands on this wonderful quality at nominal rates.

Being a quality conscious firm in this domain, we are instrumental to provide an optimum quality Turbo Ventilator. The offered ventilator is manufactured by our deft professionals using quality-approved raw materials and state-of-the-art techniques. This ventilator is widely used to exhaust industrial pollutants and contaminants like poisonous gases, smoke, dust etc in factories automotive service centers, industrial, and commercial sectors. Further, this Turbo Ventilator is available with us in different sizes, thicknesses and finishes at marginal prices. Features: High durability Excellent performance Easy to install Sturdy design

• Power: 70 W
• Voltage: AC 220 V
• Engraving Speed: 1000 Characters/s
• Laser Wavelength: 1064 Nm
• Cooling System: Air Cooling
• Frequency: 50 Hz
• Q-switch Frequency of Laser: 80 kHz
• Laser Output Power: Less than or equal to 20W
• Standard Engraving Range: 110 x 110 mm
• Minimal Linear Width: 0.01 mm
• Repeating Precision: +-0.0001 mm
• Size of the Host System: 800 x 680 x 1200 mm
• Current: 10 A

• Type: Floating
• Certification: ISO Certified
• Condition: New
• Material: Metal
• Color: Brown
• Condition: New
• Warranty: 1 Year

We are one of the well-known manufacturers and suppliers of Autoclaves. Our offered range of products release chemical free steam and is hence used for sterilizing equipments. The products that we make available are rigid in construction, highly efficient and easy to install. Further, we also offer these products in customized form as per the details laid down by our clients.   Our products are used in the following industries: Laboratories Bio-chemical industries Research institutes

A new technological development by HARIS in the field of air sterilization - using UV Light, Biological HEPA Filters, Washable Ionizer and Replaceable Ozone Generator. These Air Sterilizers are suitable for Houses, Malls, Call Centers, Offices, Hospitals, Operation Theatres, Cinema Halls, Banks, ATM Centers, Air-conditioned Buses, Air-conditioned Railway Coaches, etc. ➤ Produce "air vitamin". It can generate 8000000 "air vitamin" every second which can improve the home environment.

• Size: 1/4" Ball valve, 1/2" header Pipe
• Packaging Type: Cartoon boxes
• Color: silvery black
• Pressure: 200 bar
• Material: SS
• Brand Name: Sunlight
• Country of Origin: Made in India
• Weight: 20 Kg
• Usage/Application: Gas Distribution
• Automation Grade: Semi Automatic
• Inlet: customised
• Media: Air
• Rust Proof: yes
• Working Temperature: 35 Degree celsius
• Max Pressure: 250 kg/cm2

• Dome head: 457 mm dia
• High adjustment: 500 mm
• Possible movement: Radial, angular, axial
• Input supply voltage: 220 V

Suitable for fuel transportation tanks, fuel storage tanks, high pressure tanks, our Safety Valves are manufactured using fines quality Aluminium material. We are reliable Manufacturer, Supplier and Exporter of Safety Valves from Maharashtra.  The Safety Valves we make available are high precision parts and feature long functional life. We are capable of delivering bulk orders of the quality-tested Safety Valves. Buyers can obtain Valves at reasonable rates. Details : Made on State of the art CNC machines. Tested for extreme conditions to avoid calamities. Export Worthy Packing

• Material: Stainless Steel, Mild Steel
• Usage/Application: Industrial
• Temperature Range: Steam Temp. 121.4 oC. at 15 psi
• Automation Grade: Semi Automatic, Fully Automatic
• Pressure Controller: Mechanically operated pressure/steam release valve.
• Pressure Gauge: Analog Dial type
• Features: High performance, Longer functional life, Better efficiency

• Tube length :: 2.5m
• Tube Diameter :: O.D.9.3mm x I.D. 63mm

Features : Transparent suction gun is made from medical grade polymers.2.5m long translucent tube attached with suction gun for efficient and aromatic suction. A part is provided at the distal end of handle for easy finger tip control during suction management. Application : In Surgery for suction

• Maximum Power: 10W
• Maximum Print Speed: 500 characters/sec
• Maximum Line Speed: 60 m/min (197 ft/min)
• Environmental Protection: IP20

We are offering laser marking machine. Used for marking and coding on candy, food, animal food, fish, cosmetics, dairy, cereal indsutry products used for printing mfg, exp dates, batch code. The videojet 3020 laser marking machine is specifically designed to meet simple coding applications across a wide range of substrates. It’s simple to set-up and operate, and flexible enough to accommodate changing production demands.