Back Back
Data Logger
5,555 - 15,200 Per Piece
1 no (MOQ)
Flow Meter
2,500 - 5,000,000 Per Piece
1 Piece(s) (MOQ)
Best Deals from Testing Equipment
High Voltage Breakdown Tester
Get Price Quote
1 Piece (MOQ)
Every electrical apparatus or machine is provided with insulation between live part and earth or between two different sections of live parts. This insulation is required to be tested at high voltage values recommended by applicable relevant standards. The standard Specification for various electrical apparatus specifies Power Frequency Voltage withstand test at different levels depending upon working voltage of electrical apparatus. It is observed from the various standards for electrical equipment’s that the minimum power frequency voltage withstand test level for electrical insulation is 2kV for one minute. We have, therefore, standardized on manufacture of’ MARSZ High Voltage Breakdown Testers with rated voltage of 5kV. High Voltage Tests Sets of higher voltage upto 600kV are also manufactured against specific requirement. The standard voltages are 10kV, 15kV, 20kV, 25kV, 30kV, 50kV, 100kV, 150kV, 200kV & 300kV. The test sets upto 30kV are manufactured in Air Cooled design while the sets of 50kV & above are manufactured in Oil Cooled design. The output of these high voltage testers is single phase 50/60Hz. The standard H.T. current rating of air-cooled design as also of oil cooled design upto 150kV is 100mA for 30 minutes. For voltages ranges above ‘MARSZ’ make 5kV A.C. (with 2.5kV tap) High Voltage Breakdown Tester is portable, sturdy & plug in to start type construction & requires minimum table space. It broadly consists of 3 main sections. High Voltage Transformer: The High voltage transformer is single phase, single pole type & is of double wound resin moulded construction. The H.T. winding is provided with graded insulation such that one end is insulated for 2kV insulation and is earthed through a current sensing transformer & mill ammeter whereas other end is insulated for full rated voltage & the same brought out through H.T. Cable & spring loaded Prod. Variable Voltage Source: Variable Voltage supply is provided through a “VARIVOLT” (Variable auto-transformer) having a suitable rating corresponding to the rating of H.V. Transformer. Dimmerstat Is rated for 230Volts A.C. input & 0-270V output. Limit switch at zero position end of Dimmerstat winding is provided to facilitate the H.T. winding to Control Circuit & Other Features: Manual operated control transformer (Variable auto-transformer) with zero interlock facility. 72mm sq. double range (0-2kV / 0-5kV) moving coil rectifier type voltmeter of class 1.5, provided to read NO LOAD H.T. Voltage. 72mm sq. double range (0-100mA) moving coil rectifier type A.C. Mill ammeter of class 1.5, provided in the earth end of the H.T. winding to read H.T. Current. Automatic tripping circuit is provided for isolation of supply, in the event of failure of the object under test. Rotary switch with four different settings of 5,10, 50 & 100mA is provided on front panel with LED indication M.C.B. for short circuit protection of H.T. transformer & auto transformer H.T. ON push button, Mains ON & H.T ON LED indication. Range selection switch to select 2.5kV or 5kV range with LED indication. Two spring loaded test prods with 1 meter long cable for safe & easy connection of high voltage to test object, (upto 5kV.)
Voyage Data Recorder
Get Price Quote
We are offering voyage data recorder-vdr svdr. we bring forth an impregnable range of vdr svdr devices. This system records important information related to the vessel’s operation including safe collection and storage of voyage data such as ship position, movements, and physical condition and bridge commands for a stipulated time period, with the ability of playback. This is vdr svdr device is been fabricated by making use of latest machinery and equipment.
TABLET DISINTEGRATION TESTER-DT 1000 (Single Motor System)
Get Price Quote
salient features: meets current specification of usp, ip, bp and other pharmacopoeias in dt1000, single timer for both baskets with single drive and 20 x 2 line display specifically designed for use in the quality and production control of normal plain coated tablets & gelatin capsules programmable temperature & time molded clear acrylic water bath with illumination for better visibility auto park out facility for basket after run completion capability for dual buffer disintegration test audible, low water level alarm with indication on display for safety external temperature sensors available for individual beaker provision to identify the position of disintegrated tablet with laser marked numbers on basket assembly provision to lock individual tablet disintegration time by using external key board with basket numbers.
Escacid 40 Proton Pump Inhibitors
Get Price Quote
1000 Pack(s) (MOQ)
ESCACID-40 (Pantoprazole Sodium 40 mg tablets) is an anti-ulcer medication which comes under the group of medications called Proton Pump Inhibitors (PPI). ESCACID-40 (Pantoprazole Sodium 40 mg tablets) contains the generic medicine Pantoprazole sodium 40 mg per tablet. Pantoprazole is a Proton Pump Inhibitor. Like other PPIs, Pantoprazole exerts its pharmacodynamic properties by binding to the proton pump (h+,k+ -adenosine triphosphatase) in the parietal cells of the stomach. ESCACID-40 is used to treat gastroesophageal reflux disease (gerd), healing of erosive esophagitis and zollinger-ellison syndrome. It produces faster pain relief, ulcer healing and greater efficacy in oesophageal reflux disease. Since it is having a lower affinity for cytochrome p-450 than other proton pump inhibitors, there is less chance for drug interactions with other drugs including carbamazepine, cisapride, cyclosporine, digoxin, warfarin, e.t.c. And it has been an added advantage for its use in patients. ESCACID-40 in longer use or higher doses may cause bone fractures and these can be prevented by the intake of calcium and vitamin d supplements. It is contraindicated in patients those who are hypersensitive to pantoprazole or to any other PPI and with severe liver problems. Recommended dose: one tablet of ESCACID-40 to be taken once daily for upto 8 weeks.
pH Meter
Get Price Quote
pH meter measure the acidity or alkalinity of a substance. They are commonly used for water testing, and for biological sample analysis in hydroponics, aquaculture and agriculture. A portable meter is commonly used to measure the pH of substance such as food, beer, or wine, and is also used to test cleaning water, rinse water, and wastewater, in lab, industrial and food applications.
Digital Multimeter
Get Price Quote
Analog Multimeter
Get Price Quote
Analog Multimeter with Mirror Scale Inbuilt Buzzer and LED 0W Adjustable with x 100 Range Transistor Test ,hFE with Diode
VACUUM TUBE LEAK TESTER
Get Price Quote
A simple test instrument used by manufacturers and used to identify leaky tubes in condensers, heat exchangers and other tubular apparatus. The Vacuum Tube Leak Tester PVLD-3000 is a simple and precise tool used for testing tubes of boilers, condensers and heat exchangers. It is the fastest and most accurate method of locating leaky tubes for plugging or replacement or installation of new tubes. It works on the principle of vacuum in which the tool sucks the air from the tube and creates a vacuum to a desired reading on gauge. Steady reading on gauge indicates NO LEAK. If the reading on the gauge drops it indicates a tube with a LEAK. Features of Vaccume Tube Leak Tester Only one tool necessary for testing multiple tube sizes. Built-in easy to read vacuum gauge. Multifiled exhaust for quiet operation. Lightweight and easy to use.
Magnetic Level Indicator
Get Price Quote
We are counted among the leading Manufacturers and Suppliers of Magnetic Level Indicator in Mumbai, Maharashtra. We are trusted by buyers because of our quality assurance and fair prices. Our Magnetic Level Indicator is based on the updated technology. It provides redundant and non invasive level control. The advantages of our Magnetic Level Indicator are that it does not demand much maintenance and offers better visibility to users.
Duct Leakage Testers
Get Price Quote
Positive and Negative Duct Accreditation (PANDA) System Model PAN341 The Positive and Negative Duct Accreditation (PANDA) system provides contractors, commissioning engineers, and research and development technicians with the best in class choice of test equipment to quantify air leakage in ductwork and other areas as well as the ability to measure the performance of ducted systems. The PANDA provides a fast, accurate, automated solution and helps to ensure compliance with EN12237, EN1507, EUROVENT 22 and SMACNA standards, enhancing energy savings in buildings.
Dual Trace Oscilloscope
Get Price Quote
Salient Features 20MHz at 5mV, for each channel. X-Y operation at 5 mV sensitivity. 200 mV peak-to-peak calibrator. Dual triggering, component testing facility & trace rotation.
Ohms Law Apparatus
Get Price Quote
Flow Meter
1,200 Per Piece
electric current tester
Get Price Quote
1000 pieces (MOQ)
lab testing instrument
Get Price Quote
We are manufacturing wooden boxes for all type of measuring tools and instrument etc. If you have any query please feel free to contact us.
VEHICLE BATTERY SYSTEM METER DIGITAL AUTOMOTIVE MULTIMETER
Get Price Quote
Key Parameter Measured and Displayed for Battery Diagnosis Display of Battery Condition ( Good Ok Pay Attention Replaced) Overload Protection to ensure Operator Safety Loose Lead Detection ,Reverse Polarity Protection, Unit Conversion CCA IEC EN DIN
Multifunction Meters
Get Price Quote
Ph Meters
Get Price Quote
Hatch Cover Testing Equipment
Get Price Quote
Selec Energy Meter
Get Price Quote
Miniature USB Data Logger
Get Price Quote
The Series MTL Miniature USB Data Logger measures and records accurate readings for temperature or temperaturehumiditydew point in a wide range of applications. Sampling intervals and highlow alarm settings are user selectable through the included easy to use Windows® based software. On models ordered with an integral display, the temperature and humidity readings alternate on the display. The series MTL can be software configured to begin measuring based on a time delayed-start or by push-button. The logger can store up to 43,344 readings and can be set to stop on memory full or for continuous recording. Stored data is downloaded by plugging the unit into a PC's USB port (cable included). The loggers provide measurements for many environment conditions, which make them ideal for refrigeration systems, laboratories, and medical storage facilities.
inductance meter
Get Price Quote
Basic measurement accuracy 0.1% & speed upto 10 meas sec Large LCD display with bright white backlight Ultra low power consumption, battery powered for 2 hours of continuous use Automatic identification function (Ai). Percentage display & 4 tolerance comparator : 1%, 5%, 10% & 20% 9V battery & External power supply Automatic correction function with datahold, max. min. average recording Utility function configuration & current setup recovery after power off Standard Mini-USB interface, SCPI compatible Auto power Off Constant output impedance : 100 ohm
Conductivity Meter
Get Price Quote
Conductivity Meter
Get Price Quote
A pH meter is an electronic device used for measuring the pH (acidity or alkalinity) of a liquid (though special probes are sometimes used to measure the pH of semi-solid substances). An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.
Bottle Cap Torque Tester
Get Price Quote
Contech digital force measuring guage is a device used for measuring axial force. This can be used as handheld instrument or attached to a testing bench.
Evaluation Test Equipment
Get Price Quote
The equipment is pefc type short stack evaluation test equipment consisted of gas supply line, moisturizing line, cooling line, cell performance line and safety line.
Contact Probe
99 Per Piece
Poldi Hardness Tester
Get Price Quote
One of these is the Poldi-hammer shown in the figure given above. The hammer type portable impact hardness tester is useful for simple and quick determination of Brinell hardness of metals such as steel, Cast Iron, Brass, Aluminium, Copper etc. Due to easy handling and maneuverability, this tester is most suitable for testing heavy castings and other components, difficult to be carried to a table type hardness tester.For testing, load is applied on the work piece (specimen) and a standard test bar in linear direction through a special Brinell Ball of 10 mm diameter by a hammer blow as explained below. The tester is supplied with calibrated bars of different hardness. For hardness measurement, selection of a calibrated bar is done such that its hardness is approximately equal to hardness expected of the work piece. For a given hardness of calibration bar, at the ratio of the two diameters you’ve measured, a value of hardness is given, the hardness of the work piece.
