Testing Equipment Dealers in Turbhe, Navi Mumbai

10mm (0.4”) LCD Display,Auto Manual Shutdown,Low Battery indicator,DC Output : 0 ~ 1.3V 10mVdb,‘A’, ‘C’ or ‘Flat’ Weighing with Slow Fast response,94db in full Callibration at (1KHz),Optional RS-232 Communication,Alarm Volume op : 30 ~ 130db,Alarm op : LED Optional Relay Output,Backlight

A simple test instrument used by manufacturers and used to identify leaky tubes in condensers, heat exchangers and other tubular apparatus.   The Vacuum Tube Leak Tester PVLD-3000 is a simple and precise tool used for testing tubes of boilers, condensers and heat exchangers. It is the fastest and most accurate method of locating leaky tubes for plugging or replacement or installation of new tubes.   It works on the principle of vacuum in which the tool sucks the air from the tube and creates a vacuum to a desired reading on gauge. Steady reading on gauge indicates NO LEAK. If the reading on the gauge drops it indicates a tube with a LEAK.   Features of Vaccume Tube Leak Tester Only one tool necessary for testing multiple tube sizes. Built-in easy to read vacuum gauge. Multifiled exhaust for quiet operation. Lightweight and easy to use.

• range: up to 10,000rpm

Compact LCD pulse indicator LR5N-B Series is upgraded version of LR7N Series. The series contributes to better user convenience by adopting 1 pulse input per rotation method and wide display range up to 10,000rpm. Moreover, built-in battery allows no power supply and wiring works. Rotator’s RPM and RPS display function in another feature of LR5N-N Series to increase user’s satisfaction.

Contech, Multiparameter Meter is the perfect combination of advanced Electro chemical sensor technology with state of the art electronics and software design. This instrument can measure several parameters, like pH, mV, Conductivity TDS, Salinity, Resistivity, Dissolved oxygen & temperature using different electrodes. Large scale integration of circuit using surface mounted components and dedicated backlite LCD with display of various measuring parameter units for different parameters being measured has enabled to use this compact instrument for the measurement of multiple parameters without any ambiguity. This instrument is very useful where all parameters need to be measured like in the field of environmental protection, water quality checking, disease control, biological agriculture, aqua culture & scientific research.   Multiparameter Meter pH, mv, ms ,µs, mg/L, ppt, %, ppm,oC FOR WATER QUALITY ANALYSIS - CMPM-01 Features* pH , mV, Conductivity, Resistivity, TDS, Salinity, DO, Temperature modes. * Automatic or Manual temperature Compensation.* 3 point pH calibration.* Buffers selectable from 1.68pH, 4.00pH, 4.01pH, 6.86pH, 7.00pH, 9.18pH, 9.20pH. 10.01pH and 12.45pH.* Automatic buffer recognition. * 1 point conductivity calibration for the entire range. * Dissolved oxygen electrode with the salinity measurement feature to achieve automatic salinity & temperature compensation. * Automatic air pressure compensation for DO with the help of air pressure sensor. * Polarographic type DO electrode offers short polarization time, quick response and precise measurements. * Bi directional RS232 interface. Baud rate selectable from 1200,2400,4800 and 9600. * Single and continuous print out of measuring parameters. * Multiple Printout types. Combinations selectable from Sr. No., pH, mV, conductivity, TDS, Salinity, DO, Date, time and temperature..* Real Time Clock.* Calibration report as per GLP requirements. * Electrode Slope and mV offset display.* LCD display with Backlight. * Memory storage of 100 measurements. * Data logging facility up to 500 results. Data logging interval selectable from 5S, 10S, 20S, 30S, 1M, 2M and 5M. * Temperature calibration with respect to solution of known temperature. Magnetic Stirrer : CMS - 01 Optional For Proper Performance Of DO Meter, Magnetic Stirrer Is Must   * Power : 9V/ 500 mA External adaptor or battery backup unit (Optional)* Operating Temperature : 15~45°C * Meter Dimensions (mm) : 165 (L) x 190 (D) x 60 (H) * Meter Weight : 700 g  Optional Accessories :Magnetic Stirrer MS-01,Battery backup unit BBEC-01Calibration Standards

• Feature: * 1 point calibration for the entire range. ,Automatic or manual temperature compensation.
• Display: Backlite LCD

Laboratory Conductivity Meter can measure Conductivity, Resistivity, Total Dissolved Solids(TDS), Salinity & Temperature of any solution. This instrument is suitable in the field of water quality monitoring, aqua culture, biological agriculture, scientific & educational research, food safety, petrochemical and environmental protection. It uses ECNG01 glass electrode with a platinum plate sensitive element coated with platinum black to avoid errors due to polarization especially in solutions of high conductivity.

• Model  : pH-102  
• pH-103  : pH Range  
• 0-14pH  : 0-14pH  
• pH Resolution   : 0.01pH  
• 0.001pH  : pH Accuracy   
• +0.02pH  : +0.002pH  
• Temperature compensation   : 0-100 deg C  
• 0-100 deg C  : mV  
• +2000mV  : +2000mV  
• mV Resolution  : 1mV  
• 0.1mV  : mV Accuracy  
• +2mV  : +0.2mV

• Model: CC-01
• Conductivity Range: 0-200mS/cm
• Precision: + 1.0% full scale
• Resistivity: 0 to 50 M Ohm.cm
• Temperature: -10.0 to 110.0oC
• TDS: 0 to 80g/L

Conductivity Meters: -Contech Instruments is One of The Best Conductivity Meter Manufacturers, Conductivity Meter Suppliers, Conductivity Meter Exporters, Conductivity Meters, Conductivity Meter in India, Conductivity Meter Mumbai, and Conductivity Meter Navi Mumbai. Incorporates advanced automatic frequency convertible and voltage technology to enhance electrode’s measuring capability and maintains the electrode constant in standard solution of different concentration. One point calibration for the entire range.Advanced Microcontroller based design.Display of Conductivity & temp on backlite LCD.RS-232 Interface.Inbuilt RTC.GLP compliant.Entry of Conductivity electrode constant, machine ID through keyboard for the GLP print out.Automatic temperature compensation.Entry of temperature through keyboard in the absence of temperature sensorStorage upto 50 test results

• Frequency: 2kHz/200kHz (± 3.0%)
• Power Source: 6F22 (9V) x 1
• Frequency response: 40
• DC voltage: 200mV/2V/20V/200V/1000V (± 0.5%)
• AC voltage: 2V/20V/200V/750V (± 0.8%)
• DC current: 20mA/200mA/20A (± 0.8%)
• AC current: 20mA/200mA/20A (± 1.0%)
• Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ (± 0.8%)
• Capacitance: 20nF/2µF/200µF (± 2.5%)
• Temperature: -40°C
• Size: 189 x 97 x 35mm
• Weight: approx. 375g (including battery)
• Model: DT- 603 Digital Multimeter

A pH meter is an electronic device used for measuring the pH (acidity or alkalinity) of a liquid (though special probes are sometimes used to measure the pH of semi-solid substances). An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.

• Brand Name: SGE
• Display: Analog
• Features: Versatile Manufactured at our state of the art center Quality approved
• Model Number/Name: SGE14785
• Flow range: Upto 40 cubic metre/hr

• Features: High efficiency , Long functional life , Easy to use
• Item Code: A-701

• Brand Name: TOPLAB INDIA PVT LTD,TOPLAB INDIA
• Material: Stainless Steel
• Color: Green, White,White
• Automatic Grade: Semi Automatic
• Application: Industrial, Water treatment plant
• Size: 400×300×250mm
• Feature: Accuracy
• Voltage: 220V
• Display: Digital LED
• Country of Origin: India
• Measuring range: 0
• Calibration points: 0NTU,50NTU,100NTU,200NTU
• Ambient temperature: 5
• Warranty: 01 year

• Material: Steel
• Name: Penetrometer Apparatus
• Quality: Best
• Power Source: Electric
• Usage: Industrial
• Finish: Polished

• Type: TABLET DISINTEGRATION TESTER
• Voltage: 230Vac / 50 Hz, 275 W
• Condition: New

salient features: meets current specification of usp, ip, bp and other pharmacopoeias in dt1000, single timer for both baskets with single drive and 20 x 2 line display specifically designed for use in the quality and production control of normal plain coated tablets & gelatin capsules programmable temperature & time molded clear acrylic water bath with illumination for better visibility auto park out facility for basket after run completion capability for dual buffer disintegration test audible, low water level alarm with indication on display for safety external temperature sensors available for individual beaker provision to identify the position of disintegrated tablet with laser marked numbers on basket assembly provision to lock individual tablet disintegration time by using external key board with basket numbers.

• Type: Ultrasonic Flaw Detector
• Certification: CE Certified
• Condition: New
• Driven Type: Battery
• Power Source: Battery

Sonatest range of ultrasonic flaw detectors comprises of just four models the Sitescan 500S & D-50 offering entry level broadband UT performance & the Masterscan 700S & the D-70 providing the highest specification to the market including 8 filter settings from 100kHz to 22MHz, with 100-450V square wave transmitter and 20-meter range. .

• Brand Name: HANNA
• Model No.: HI5222
• Type of PH Meter: Table-Top