Transformers Dealers in Ttc Industrial Area, Navi Mumbai

We are offering current transformer. Tiepl series current transformers are made with selected core materials to suit different applications,. Ct`s & pt`s upto 36 kv tape insulated resin casting asb casing ring type bar type accuracy class 0.2, 0.5, 0.5s, 1, 5 etc rated burden 0.1 va to 25 va tailor made specifications as per is 2705

A famed name, the company is enlisted amidst the well-known Suppliers of Transformer Tanks. Customers\' satisfaction is our utmost priority and thus, we deliver only certified array of products to them.

• Dielectric Strength: 2.5KV at 50Hz for 1 min
• Dielectric Resistance: 100M Ohms @ 500V DC
• Working Frequency: 50 - 400Hz
• Ambient Temperature: -25˚C

Electronic energy meter, power transducer, precision power meter and other power and energy monitoring devices, Over current protection circuit of motor and other electrical appliances.

• System Voltage: 720V Maximum
• Certification: CE
• Feature: Applicable for bus bar with aperature upto 100mm
• Rated Primary Rating: 30 to 4000A
• Rated Secondary Output: 5A
• Rated Burden (VA): 1/1.25/1.5/2.5/3/3.75/5/7.5/5/10/15
• Accuracy: 0.5/1/3/5
• Operating Frequency: AC 50Hz / 60Hz
• Mounting: Panel Mount/DIN Rail Mount (Optional Accessory )
• Applicable Standard: IEC 61869-2

Current Measurement, Monitoring and Protection for Electrical Wiring and Equipment, Current and Power Measurement for Electric Motors, Lighting, Air Compressor, Heating and Ventilation System, Air - Condition Equipment and Automation - Control System, Current, Power and Energy Monitoring Device, Relay Protection Device

• Type: Toroidal Core
• Material: Steel
• Shape: Round
• Application: Transformer
• Color: Grey
• Feature: Best Quality
• Phase: Single Phase

Specifications : all the transformers and chokes are designed and manufactured as per customers specifications, to achieve the performance results as per the customer's requirement, followed by the relevant indian standard specification. The reference of product related is specification is stated in the product description above. However transformers, chokes, and other products as per other national or international specifications, such as iec, bs, astm, jis, din etc. Are manufactured as per the customers� requirement. capability & strengths : to produce high-quality products we have having all the necessary infrastructure and man power. It is having an array of trained and experienced engineers in its design, production and quality assurance departments. These departments are supported by qualified and experienced staff of house keeping, purchase and marketing

• Type: Transformer Oil
• Certification: FSSAI Certified
• Color: Light Yellow, Transparent
• Condition: Used
• Application: Lubricating
• Packaging Type: Glass Bottle, Mason Jar, Plastic Bottle, Vacuum Pack
• Form: Liquid
• Feature: 100% Pure, Certified Usda Organic, Cold Processed Centrifuged Extracted, Gluten Free Non-gmo, Highest Quality, Ideal For Dull Skin And Hair, Natural Virgin Coldpressed Coconut Kernel Oil, Ultra Healthy Coconut Oil
• Packaging Size: 100gm, 1kg, 200g, 2kg, 500gm, 50g

All the Transformers of primary voltage class from 66kV and above are conventionally termed as Extra High Voltage (EHV) Transformers. These EHV Transformers are generally used for stepping down voltage from Transmission lines. EHV transformers generally have force cooling and on load tap changer. We, at Telawne, have facility to manufacture upto 50MVA and 132kV Class EHV Transformers.

In CRGO grades required by customer, duly wound and annealed in inert atmosphere.Guaranteed No load current (AT Cm) as per B-H Curve of particular grade In house testing facilities and 100% testing done on all Toroidal Cores at flux densities specified by customers. Annealing in controlled Nitrogen atmosphere for 18 to 24 hours (at 800° C) Testing for electrical values and issue of test certificates Painting or impregnation (if required) .

In cast resin dry type transformers, the complete encapsulation of primary and secondary winding in epoxy resin prevents penetration of moisture into windings. The cast resin offers very good protection against adverse ambient conditions. These transformers can work without disruption of service at 100% humidity. Due to the high grade insulation material, coils are non hygroscopic & the transformer can be switched on directly without pre-drying even after a long period of service interruption. Contrary to the conventional dry type transformers the cast coil transformers are better in respect of impulse voltage withstand strength. Higher dynamic short circuit withstands strength as compared to oil immersed and conventional dry type transformers because of fibre glass reinforced epoxy encapsulation. No partial discharges can occur during operation. The insulation material used is glass fibre reinforced with epoxy resin of class 'F' which can withstand wide temperature variation. Due to high quality insulation material the transformer is practically non-inflammable by an electrical arc, special fire protection measures are not required. Due to encapsulation of coils with cast resin the coils dimensions are stable & no coil tightening is required to maintain the short circuit strength. Also no check of oil level and electrical insulation/oil is required. This leads to saving in cost on account of maintenance. As cast resin transformers are solidly cast, problem associated with oil filled transformers like oil leakage and pilferage of oil is completely avoided. These transformers are generally smaller in dimensions and lesser in weights. The construction and installation cost for the sub-station can be reduced by adopting dry type transformers. Without fire or danger of explosion, it is possible to place the transformers near to the load centre. Also, these transformers do not need construction of special fibre brick walls or oil pits, which reduces the overall civil works. Additionally, since LT cables are not required, thers is also saving in cost on account of expensive cable laying works. Since no oil is used in these transformers, there are no chances of contamination of ground water due to oil leakage.

The core balance current transformers are intended for providing earth leakage protection on 3 phase electrical system. These currents transformer are different from normal protective and metering current transformers due to their performance requirement. In insulated or compensated neutral networks, earth leakage currents Are small and generally very much less than the nominal load current. Such earth leakage current should not be allowed to exist for long periods of time, since eventually it leads to insulation failure on the healthy phases and subsequent development in phase to phase or double phase to earth faults. To protect cable circuits and also overhead transmission lines with cable terminations, core balance current transformers are commonly employed.

Split-core Current transformers eliminates the need to open the primary cable during installation over existing bushings or cable, resulting in lower installEasier Installation Portable 4 standard sizes Split core designation cost and time than closed-core designs.

Ignition Transformers, Control Transformers, Current Transformers

The Low Voltage Transformer is insulated, using suitable insulating material ensuring that the possibility of premature failure due to insulation loss is eliminated. Our Low Voltage Transformer is designed to provide lasting service and low noise level. We are a credible source to get the best Low Voltage Transformer at the market leading prices. These Low Voltage Transformers are available in different capacities. Highlights : Low mechanical hum Lightweight No-load loss

• System Voltage: 720V maximum

Rated Primary Rating: 30 to 600A, Rated Secondary Output: 5A, Rated Burden: 1.5 to 5VA, Accuracy: 1 to 5, Operating Frequency: AC 50Hz 60Hz.

• Phase: Single & Three Phase
• Range: 50VA To 1000 KVA
• Frequency: 50 / 60 Hz.
• Winding Material: Copper & Aluminum
• Core Material: CRGO / CRNO / Amorphous / Ferrite
• Insulation System: Up To 210°C ( 115°C Temp.Rise)
• Application: Drive, UPS, Marine, Traction, Windmill, Solar

Specification : Single & Multiple Primaries & Secondaries. Encapsulated / Open Coils Coils With Silica Sand & Resin Compound Transformer With Built In Reactor Salient Features : Constructed to withstand + 10% continuous voltage fluctuations as a standard. Conform to BIS and international standards. Insulation class ‘E’ to ‘H’ as specified. High Quality Lamination and Conductors ensure Low Losses. Impregnated with International Quality Resins and Varnishes. Chemically treated and plated fasteners and hardware to avoid corrosion. Terminals shrouded for safety. Shields inserted as per customers’ special requests. Saturation and Linearity as per specifications Taps in windings provided as per customers’ special requests. Sheet Metal Enclosures as per required IP class of protection on request. Incoming Components and Materials inspected before use. In Process Controls and Production Testing Systems for all products. All testing carried out by Calibrated Test Equipments. Test Certificate for Type Tests and Routine Tests provided on request. Rugged construction for maintenance free performance. Products warranted against manufacturing defects.

Silica Gel Breather, Vertical Cartridge Heater, HYDRAULIC JACKING SYSTEM

We present electrical insulating oil in the form of Transformer Oil. Our Transformer Oils are ideal for use as an insulating and heat transfer media in various electrical systems, in which there is a need for normal oxidation resistance. We source the Transformer Oil from reliable and certified vendors who produce Transformer Oil, via clay contracting, a multi-stage continuous refining process and vacuum filtration process. The Transformer Oil is free from polar compounds. Our Transformer Oils are severely hydro-treated. The Transformer Oils are available at market leading prices.

Oil Filled Transformer

Swan Neck Radiators, Radiator, Welded or Flanged Type Radiators

Special Purpose Transformers, Pulse Transformers, switching transformers

CRGO Transformer Lamination Core, crgo lamination E AND I ALL TYPES

Electronic Coil, ICCT & FUNCTIONAL TESTING OF PCBA, pcb design service

cut c cores, cut e cores, Toroidal Core

A well known TRANSFORMER OIL supplying company.

Flange Type Radiator, Radiator, radiator with graded elements

Three Phase Oil Cooled Transformer 100KVA, 11KV, losses @100% 1650W, Minimum quantity 1

Small Switched And Pulse Transformers