Distribution Transformers Dealers in Navi Mumbai

Automatic Voltage Controllers, Dry Type Transformer, Voltage Transformers, Electroplating Rectifiers, Static Transformers, Distribution Transformers, and other electrical machines

• Frequency: 50/60Hz
• Phase: Three Phase
• Input Voltage: 6.6 to 22/0.433 KV
• Short Circuit Rating: Upto 20 KA
• Rating: 63 to 1000 KVA
• MV Switchgear: Upto 22 KV

We at TRANSPOWER have an extensive record as a trusted manufacturer of wide range of Transformers (which includes Oil filled, VPI and Cast Resin), reactorschokes, CTs, PTs & coils to cater different industries as per the applications & specifications of customers. As we are committed to customer satisfaction by providing wide range of power solutions, we had great interaction with different field customers with their challenging requirements. Our organisation core competency got evolved over the years to benchmark ourselves against global leaders by utilizing strategic combination of our last 30 years’ experience, design capabilities, innovative ideas. Further this helped us to have better access to most advanced magnetic & insulating materials to provide our customers quality products with optimum cost. Presently bwe design, develop, produce and deliver wide range of high quality Magnetics as per international standards.

• Certification: ISI Certified
• Frequency: 60hz
• Warranty: 1 year
• Application: Industrial Use
• Output Type: AC Single Phase
• Tensile Strength: 125-150Mpa
• Feature: Easy To Install, Sturdy Construction
• Power: 10-5000 kva up to 33 kv

We are offering transformer distribution transformer : 10-5000 kva up to 33 kv.

• Material: Copper
• Brand: Shree Transformers
• Deal In: New Only
• Usage/Application: Industrial

• Brand Name: Siemens
• Port: Mumbai
• Place of Origin: Maharashtra, India
• Supply Ability: 100 Piece/Pieces per Quarter
• Model Number: Power Transformer

We are the main supplier of this product.

We are offering unitised substation. Description unitised substation are designed for locations where space and safety is a concern, population density is high, such as urban centre. Unitised substation is divided in three section or compartment � medium voltage, transformer and low voltage switchboard. Unitised substations are designed in accordance with is 14786 iec 61330 standards with degree of protection for ip23 for transformer and ip54 for mv & lv compartments or as per customer requirement. Technical specifications mv switchgear- 3.3 to 33 kv type of switchgear- lbs sfu breaker rmu insulation medium- sf6 gas or vacuum tripping- fuse relay short circuit rating- up to 20 ka or as per customer requirement type of cooling- oil immersed dry type rating- 100 to 2000 kva voltage -3.3 to 330.433 kv or any specific phase frequency- 3 phase 50 or 60 hz. Vector group- dyn1 or dyn5 or dyn11 or any specific. Mv switchgear- acb's, mccb's current rating- up to 3250 amps voltage- 433 volts no. Of poles- 3 4 short circuit rating- 50ka or as per customer requirement assured features windings are electrically balanced to minimize axial short circuit forces. Coils are held rigidly in place between insulators clamped to the upper and lower core frames under high compression. Precise casting under vacuum ensuring low partial discharge. Smooth surface finish and robust construction of mv & lv cast coils. Adequate ducts between coils, discs for maximum air flow and reduced hot spot temperature. Step-lap designed crgo lamination for lower losses and excitation current.

• Features: Easy installation , Optimum tolerance , Accuracy.

A distribution transformer is a transformer that provides the final voltage transformation in the electric power distribution system, stepping down the voltage used in the distribution lines to the level used by the customer. The invention of a practical efficient transformer made AC power distribution feasible; a system using distribution transformers was demonstrated as early as 1882. If mounted on a utility pole, they are called pole-mount transformers. If the distribution lines are located at ground level or underground, distribution transformers are mounted on concrete pads and locked in steel cases, thus known as pad-mount transformers. Distribution transformers normally have ratings up to 200 kVA, although some national standards can describe units up to 5000 kVA as distribution transformers. Since distribution transformers are energized for 24 hours a day (even when they don't carry any load), reducing iron losses has an important role in their design. As they usually don't operate at full load, they are designed to have maximum efficiency at lower loads. To have a better efficiency, voltage regulation in these transformers should be kept to a minimum. Hence they are designed to have small leakage reactance.   Distribution transformers are classified into different categories based on certain factors such as :   • Mounting location - pole, pad, underground vault• Type of insulation - liquid-immersed or dry-type• Number of Phases - single-phase or three-phase• Voltage class• Basic impulse insulation level (BIL).   Distribution transformers are normally located at a service drop, where wires run from a utility pole or underground power lines to a customer's premises. They are often used for the power supply of facilities outside settlements, such as isolated houses, farmyards or pumping stations at voltages below 30 kV. Another application is the power supply of the overhead wire of railways electrified with AC. In this case single phase distribution transformers are used. The number of customers fed by a single distribution transformer varies depending on the number of customers in an area. Several homes may be fed off a single transformer in urban areas; rural distribution may require one transformer per customer. A large commercial or industrial complex will have multiple distribution transformers. Pad mount transformers are used in urban areas and neighborhoods where the primary distribution lines run underground. Many large buildings have electric service provided at primary distribution voltage. These buildings have customer-owned transformers in the basement for step-down purposes. In a secondary network system as used in urban areas, many distribution transformers may be connected in parallel, each equipped with its own network protector circuit breaker to isolate it from the secondary network in case of a fault. Distribution transformers are also found in the power collector networks of wind farms, where they step up power from each wind turbine to connect to a substation that may be several miles (kilo meters) distant. Application in following industries : Chemical, Pharmaceuticals, Steel, Textile, Engineering, Plastic, Cement, Refineries, Mining, Captive Power Projects, Hydro Power Projects, Wind Mill Farms, Construction Houses, Pharma, Electrical, Electronics, Renewable Energy, Automobile.

Oil Filled Transformer

Three Phase Oil Cooled Transformer 100KVA, 11KV, losses @100% 1650W, Minimum quantity 1

Distribution Transformers, vacuum pressure impregnated transformers

electrical substation, dc batteries, Electronic Equipment, Numerical Relays

Distribution Transformers, Winding Machines

Transformer Oil Filtration Cartridge Element, Open delta transformer

Current Transformer Oil Cooled, Computer AMC Services, repairing tools

Electrical Switches, Electrical Sockets, Vacuum Circuit Breaker

electrical substation, Fingerprint Verification System

Distribution Transformers, Potential Transformers, Light Fittings

Substation, Electrical Panels, Electrical Switchgear

Electrical Transformer, Electrical Transformers

Electrical Transformer, Electrical Cable, electrical mcb switch

Cast Resin Transformer, Dry Transformer

outdoor transformer substation, indoor transformer substation

Ring current transformer