Cast Iron Filter Press Dealers in Gandevi, Navsari

Here the process of Membrane Filter Plate is applicable. After the pressure is achieved on the preset the sludge stops entering into the chamber and the membranes are inflated. The chamber below has a drainage through which Air or water is used to generate pressure and is pumped inside the squeeze cavity to inflate the face of the plate against the filter cake. The cake is dewatered and then removed from the chamber.Less filtration time. Uniform filter cake for continuous output. Dry cake matter content as squeezing procedure is involved. Low Investment cost. High Acceptability to all Product compositions. Low energy consumption.

We manufacture fully automated advanced filter press with plate shifting & plate shaker for autocake discharge along with plc based electrical control panel & pneumatically opereated control valves, flow sensor and hydraulically operated door drip tray. In this filter press initial filtration process takes place with the push of a button. Operator initiates filtration. Slurry is pumped into all chambers and cakes are formed as filtrate begins to flow. The end of filtration phase is automated by flow meter which is located on filtrate discharge pipe. The flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase a plate vibrating device during the discharge phase ensures 100 pct release of the cake. A plc controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment

The operation of conventional filter presses have always been messy and labor intensive. With ever increasing labor cost there arose a demand for atomizing several filter press operations. N.M. Patel Engg. was first to develop & offer automatic filter presses with following features.    Auto Shaking mechanism The filter press with precisely engineered auto shaking mechanism will shake the group of plates at one time maintaining the predetermined gap between the two plates via chain or rope. The auto shaking mechanism is run by electric or hydro-motor shaking the plates with suitable revolutions adjusted by means of PLC, which co-relates the filtration sequence without operator’s attention. AUTO PLATE SHIFTER FILTER PRESSThis highly advanced arrangement, provides fully automated closing and opening. When the filter is ready for cake dumping, the double acting cylinder retracts, pulling with it the movable head or follower. As soon as the followers is fully retracted, the shuttle shifter takes over, picking up the first plate from the head end of the unit, moving it across the opening or cleaning space to expose the cake and stacking it against the follower. The shifter then automatically reverses, returns for the next plate, transports and stacks it against the first plate and so on with time cycle set in PLC. Until all of the plates have been successively shifted and chambers dumped. An over-ride is provided so that the shifter can be stopped at any time and its motion resumed when the operator desired. Drip Trays in Bombay Door ConstructionDrip Trays are kept below the plates or Plate & Frame. It serves the purpose of collecting Drip (Filtrate) during the filtration or water during washing which falls due to capillary action from the Filter cloth.Arranged underneath the filter plate set.Fabricated of steel with plastic coating, stainless steel or entirely of synthetic material. Operated manually or fully automatic by means  of electro gear drive or hydro motor. Accident Prevention  As safety precaution for the operating personnel. Safety Light Curtain to interrupt operation with pull-cord in order to re-start the closing and plate shifting device.

• Features: Less Capital Expenditure : Filter Press & Dryer can be planned smaller

We manufacture Fully Automated Advanced Filter Press With Plate Shifting & Plate Shaker For Autocake Discharge Along With PLC Based Electrical Control Panel & Pneumatically Opereated Control Valves, Flow Sensor and Hydraulically Operated Door Drip Tray. In this Filter Press Initial filtration process takes place with the push of a button. Operator initiates filtration. Slurry is pumped into all chambers and cakes are formed as filtrate begins to flow. The end of filtration phase is automated by flow meter which is located on filtrate discharge pipe. The flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase A plate vibrating device during the discharge phase ensures 100 PCT release of the cake. A PLC controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment Use of the most modern and advanced systems for operator protection and safety.

We are main supplier of this product.

• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Mechanical
• Warranty: 1year

These are advance version of Recessed Chamber Closed configuration plates, where Filter Cloth is caulked in the caulking groove around the recess plate. Major benefits of this design are Zero leak Recess Type Filter Plate because ‘O’ Ring seats around the sealing edge and filtrate hole secure tight seal when the plate pack is closed. Cloth caulking groove provide easy installation and least maintenance of the filter cloth. CGR plates are recommended and necessary for leak proof conditions like toxic substance, acidic solutions etc. ‘O’ Ring are available in the different elastomers like EPDM, Neoprene, viton etc. These plates are available with center, top, bottom and corner feeding with adaptable diameter and designed at 8 and 16 bar operating pressure.

The Membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber. The replaceable membrane are either from Rubber or EP family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness. Due to Squeezing process the Membrane Plates offers following advantages.– Reduction in Moisture content in the final filter cake– Reduction in Filtration, Washing as well discharge time.– Reduction of washing liquid consumption due to more homogeneous cake structure.– Increased Uniformity in dewatering of the filter cake.– Improvement in cake release from the filter press.– Saving in filtration process cost and time. Membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.

PP filter press are still valid solutions in application where low solid feeds are present as well filtrate quality and cake washing extraction are important.These plates usually used in applications where filtration area is more important than volume. Filter plate & frame are available in polypropelene - HPCP material which application is suitable upto 800C. Our standard plate & frame configuration covers wider range of applications in the variety of industries and customized designs also met the specific process applications.

Automatic Filter Press, screw type filter press, retched type filter press

Cast Iron Filter Press, Manual Filter Press

Screen Filters, L Type Screen Filter, Metal Body Disc Filter