Filter Press Dealers in Bilimora, Navsari

• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Mechanical
• Warranty: 1year

These are advance version of Recessed Chamber Closed configuration plates, where Filter Cloth is caulked in the caulking groove around the recess plate. Major benefits of this design are Zero leak Recess Type Filter Plate because ‘O’ Ring seats around the sealing edge and filtrate hole secure tight seal when the plate pack is closed. Cloth caulking groove provide easy installation and least maintenance of the filter cloth. CGR plates are recommended and necessary for leak proof conditions like toxic substance, acidic solutions etc. ‘O’ Ring are available in the different elastomers like EPDM, Neoprene, viton etc. These plates are available with center, top, bottom and corner feeding with adaptable diameter and designed at 8 and 16 bar operating pressure.

Side Bar Filter PressesOur range of supply for side bar filter presses comprises:Small & Medium size filter pressesfor plate sizes: € 500 mm and € 1000 mm, upto 16 bar operating pressure. The hydraulic closing device can either be chosen as manual or electro-hydraulic unit. Filter presses for automated operationPlate sizes: € 800 mm up to € 1500 mm, operating pressures ranging from 5 to 16 bar. For this filter press system two well-proven skeleton versions are available:       Skeleton made from cast iron: This version is especially recommended for severe operating conditions in chemical and metallurgical industry.    Skeleton made from steel: This type has been developed especially for operating pressures >16 bar.Of course it is possible to have product-wetted parts of both filter press types equipped with corrosion-resistant coatings. PP & PP/FRP coating Rubber-lining  & stainless steel coating Stainless steel coating The basic components of a filter press are:Closing of Filter Plate Set. Automatic hydraulic with maintaining pressure device.Hydraulic CylinderDouble Acting chrome-plated.Pressure-upto 325 kg/Cm2 Stroke- 150 to 1000 mm and on request upto 3000 mm Capacity- 30 Tons to 300 Tons Power Pack-Power Pack consists of high-pressure radial plunger Pump. Hand operated Directional Control valve, Solenoid valve, pilot operated check valve, Relief valve, Oil Filter, pressure gauge, Electric Motor. Working Pressure: upto 325 kg/Cm2Design for Flame- Proof & Non-flame proof area. Filter Plate SetChamber plates in standard design are fabricated of pressure-resistant and corrosion-proof polymer. Other materials such as cast iron, ductile iron, aluminum, stainless steel available on request. Filtrate discharge is available either in open design through spigots into a filtrate trough or in closed design through corner ports into discharge pipes. Filter ClothsPush-through filter cloths made of polyamide, polypropylene, polyester, cotton or other materials.  Special Equipments Control Panel.Equipped with operating components, control and motor centers, mounted on the filter press, ready for connection.    

This Membrane Filter Plates operate to a feed pressure of up to 7 bar and the squeezed pressure can be up to 15 bar. PANAMA ENGINEERING can manufacture special plates for special needs for high feed pressures or low squeeze pressures. PANAMA ENGINEERING manufactures membrane plates with thermoplastic or 100% polypropylene.

High dry solids content in the filtration cake (higher than with the chamber filter press) => lower costs of transport and storage of the cake Shortened filtration cycle – compared to the chamber filter press it is possible to perform more filtration cycles over the same time. adaptability to the changing filtration conditions – e.g. differences in the suspended solids concentrations in the fed suspension Possibility of efficient washing of the filtration cake– controlled pressure of membranes ensured continuous flow of washing liquid through the cake. This ensures that the substances are washed out of the cake and the required purity is ensured. Smaller dimensions of the filter press given the same performance compared to the chamber filter press

Hydraulic cylinder pull back type Double Acting chrome-plated. Pressure-upto 450 kgCm2, Hydraulic cylinder with mechanical locknut Single-acting, Safety Lock Nut for mechanical load holding type, Hydraulic Cylinder Capacity- 30 Tons to 450 Tons & Stroke- 150 to 1000 mm and on request up to 3000 mm Stroke.

Automatic Filter Press, screw type filter press, retched type filter press

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.

Manual Filter Press, Cast Iron Filter Press

Screen Filters, L Type Screen Filter, Metal Body Disc Filter