Filters Dealers in Bilimora, Navsari

• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Mechanical
• Warranty: 1year

These are advance version of Recessed Chamber Closed configuration plates, where Filter Cloth is caulked in the caulking groove around the recess plate. Major benefits of this design are Zero leak Recess Type Filter Plate because ‘O’ Ring seats around the sealing edge and filtrate hole secure tight seal when the plate pack is closed. Cloth caulking groove provide easy installation and least maintenance of the filter cloth. CGR plates are recommended and necessary for leak proof conditions like toxic substance, acidic solutions etc. ‘O’ Ring are available in the different elastomers like EPDM, Neoprene, viton etc. These plates are available with center, top, bottom and corner feeding with adaptable diameter and designed at 8 and 16 bar operating pressure.

In our range of Semi-automatic Filter Press the maximum pressure will be 25MPA in hydraulic devices by using electro connecting pressure gauges. 1.0 MPA is the maximum filtration pressure can be applied for the optimum condition for pressure filtration or cake formation. The control panel is simple and user-friendly with easy operation.

• Size: 305mm X 305mm

Filter plate Recessed chamber plate,Gasket chamber plate,Non-gasket chamber plate, Membrane squeeze plate,Plates and Frames up to 6kgcm2 operations,5 kgcm2 to 15kgcm2 operations.

Membrane Filter Press, Automatic Filter Press, screw type filter press

Side Bar Filter PressesOur range of supply for side bar filter presses comprises:Small & Medium size filter pressesfor plate sizes: € 500 mm and € 1000 mm, upto 16 bar operating pressure. The hydraulic closing device can either be chosen as manual or electro-hydraulic unit. Filter presses for automated operationPlate sizes: € 800 mm up to € 1500 mm, operating pressures ranging from 5 to 16 bar. For this filter press system two well-proven skeleton versions are available:       Skeleton made from cast iron: This version is especially recommended for severe operating conditions in chemical and metallurgical industry.    Skeleton made from steel: This type has been developed especially for operating pressures >16 bar.Of course it is possible to have product-wetted parts of both filter press types equipped with corrosion-resistant coatings. PP & PP/FRP coating Rubber-lining  & stainless steel coating Stainless steel coating The basic components of a filter press are:Closing of Filter Plate Set. Automatic hydraulic with maintaining pressure device.Hydraulic CylinderDouble Acting chrome-plated.Pressure-upto 325 kg/Cm2 Stroke- 150 to 1000 mm and on request upto 3000 mm Capacity- 30 Tons to 300 Tons Power Pack-Power Pack consists of high-pressure radial plunger Pump. Hand operated Directional Control valve, Solenoid valve, pilot operated check valve, Relief valve, Oil Filter, pressure gauge, Electric Motor. Working Pressure: upto 325 kg/Cm2Design for Flame- Proof & Non-flame proof area. Filter Plate SetChamber plates in standard design are fabricated of pressure-resistant and corrosion-proof polymer. Other materials such as cast iron, ductile iron, aluminum, stainless steel available on request. Filtrate discharge is available either in open design through spigots into a filtrate trough or in closed design through corner ports into discharge pipes. Filter ClothsPush-through filter cloths made of polyamide, polypropylene, polyester, cotton or other materials.  Special Equipments Control Panel.Equipped with operating components, control and motor centers, mounted on the filter press, ready for connection.    

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.

each fitted with a durable permeable cloth. The recessed plates are pushed together in normal operation. The pressure required for dewatering is provided by the feed pump. During the filtration cycle the sludge is initially pumped into the chambers at a high rate. This rate is reduced as the chambers are filled and the pressure builds. The cloths retain the solids, allowing water to pass through as filtrate. Once the pressure in the press reaches a set point and the filtrate is reduced to a trickle the dewatering cycle is complete. The next stage of the process is to empty the press by opening the plate chambers and allowing the dewatered cake biscuits to drop out. This entire operation can be a manual, semi automated or fully automated process. Once the press is empty the plates are returned to the closed position, ready for further batches. The manual filter press unit is fitted with a hand pump, and is ideal for small sludge volumes. The semi-automatic filter press range, with a hydraulic pump for plate pack closing. The fully automatic machine includes automatic plate shifting, plate vibration and drip trays. A number of options are available to assist ease of operation for all models, including the Air-Track plate shifter, membrane plates for increased filtration pressures.

The Agitated Nutsche filter is a Nutsche type filter designed to separate solids from liquids. It is totally enclosed and is normally operated under pressure or under vacuum. Additionally, the equipment is fitted with a stirrer mechanism which efficiently agitates the slurry during cake washing, smoothens and squeezes the cake during filtration and assists in the automatic discharge of the cake.

Metal Body Disc Filter, Screen Filters, L Type Screen Filter

Cast Iron Filter Press, Manual Filter Press

excavator filter, Excavator Swing Motor