Filters Dealers in Gandevi, Navsari

Side Bar Filter PressesOur range of supply for side bar filter presses comprises:Small & Medium size filter pressesfor plate sizes: € 500 mm and € 1000 mm, upto 16 bar operating pressure. The hydraulic closing device can either be chosen as manual or electro-hydraulic unit. Filter presses for automated operationPlate sizes: € 800 mm up to € 1500 mm, operating pressures ranging from 5 to 16 bar. For this filter press system two well-proven skeleton versions are available:       Skeleton made from cast iron: This version is especially recommended for severe operating conditions in chemical and metallurgical industry.    Skeleton made from steel: This type has been developed especially for operating pressures >16 bar.Of course it is possible to have product-wetted parts of both filter press types equipped with corrosion-resistant coatings. PP & PP/FRP coating Rubber-lining  & stainless steel coating Stainless steel coating The basic components of a filter press are:Closing of Filter Plate Set. Automatic hydraulic with maintaining pressure device.Hydraulic CylinderDouble Acting chrome-plated.Pressure-upto 325 kg/Cm2 Stroke- 150 to 1000 mm and on request upto 3000 mm Capacity- 30 Tons to 300 Tons Power Pack-Power Pack consists of high-pressure radial plunger Pump. Hand operated Directional Control valve, Solenoid valve, pilot operated check valve, Relief valve, Oil Filter, pressure gauge, Electric Motor. Working Pressure: upto 325 kg/Cm2Design for Flame- Proof & Non-flame proof area. Filter Plate SetChamber plates in standard design are fabricated of pressure-resistant and corrosion-proof polymer. Other materials such as cast iron, ductile iron, aluminum, stainless steel available on request. Filtrate discharge is available either in open design through spigots into a filtrate trough or in closed design through corner ports into discharge pipes. Filter ClothsPush-through filter cloths made of polyamide, polypropylene, polyester, cotton or other materials.  Special Equipments Control Panel.Equipped with operating components, control and motor centers, mounted on the filter press, ready for connection.    

Here the process of Membrane Filter Plate is applicable. After the pressure is achieved on the preset the sludge stops entering into the chamber and the membranes are inflated. The chamber below has a drainage through which Air or water is used to generate pressure and is pumped inside the squeeze cavity to inflate the face of the plate against the filter cake. The cake is dewatered and then removed from the chamber.Less filtration time. Uniform filter cake for continuous output. Dry cake matter content as squeezing procedure is involved. Low Investment cost. High Acceptability to all Product compositions. Low energy consumption.

• Features: Less Capital Expenditure : Filter Press & Dryer can be planned smaller

We manufacture Fully Automated Advanced Filter Press With Plate Shifting & Plate Shaker For Autocake Discharge Along With PLC Based Electrical Control Panel & Pneumatically Opereated Control Valves, Flow Sensor and Hydraulically Operated Door Drip Tray. In this Filter Press Initial filtration process takes place with the push of a button. Operator initiates filtration. Slurry is pumped into all chambers and cakes are formed as filtrate begins to flow. The end of filtration phase is automated by flow meter which is located on filtrate discharge pipe. The flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase A plate vibrating device during the discharge phase ensures 100 PCT release of the cake. A PLC controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment Use of the most modern and advanced systems for operator protection and safety.

We manufacture fully automated advanced filter press with plate shifting & plate shaker for autocake discharge along with plc based electrical control panel & pneumatically opereated control valves, flow sensor and hydraulically operated door drip tray. In this filter press initial filtration process takes place with the push of a button. Operator initiates filtration. Slurry is pumped into all chambers and cakes are formed as filtrate begins to flow. The end of filtration phase is automated by flow meter which is located on filtrate discharge pipe. The flow meter indicates the minimum flow rate of filtrate which is strictly related to the end of a cycle, the opening of filter press and the discharging phase a plate vibrating device during the discharge phase ensures 100 pct release of the cake. A plc controls the phases and cycle times for all the filter press functions including operation of the ancillary equipment

• Weight: 100-1000kg
• Color: Blue
• Voltage: 440V
• Condition: New
• Automatic Grade: Automatic
• Driven Type: Mechanical
• Warranty: 5years

We are a major Automatic Filter Press Manufacturer from India providing advanced technology for optimum filtration. Operation is initiated by a push button activated manually. The whole system of our Automatic Filter Press is controlled by computerized mechanism that leaves no room for error. The PLC mechanism controls cycle times, phases and the ancillary equipment as well. Use of modern filter fabrics ensures easy cake discharge, while the removal of restrictions produces uniform cakes.Features : Increases product yield High solid consistency Completely user friendly Useful for varied applications Minimum maintenance Economical.

• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Mechanical
• Warranty: 1year

These are advance version of Recessed Chamber Closed configuration plates, where Filter Cloth is caulked in the caulking groove around the recess plate. Major benefits of this design are Zero leak Recess Type Filter Plate because ‘O’ Ring seats around the sealing edge and filtrate hole secure tight seal when the plate pack is closed. Cloth caulking groove provide easy installation and least maintenance of the filter cloth. CGR plates are recommended and necessary for leak proof conditions like toxic substance, acidic solutions etc. ‘O’ Ring are available in the different elastomers like EPDM, Neoprene, viton etc. These plates are available with center, top, bottom and corner feeding with adaptable diameter and designed at 8 and 16 bar operating pressure.

the membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber.      the replaceable membrane are either from rubber or ep family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness.     due to squeezing process the membrane plates offers following advantages.- reduction in moisture content in the final filter cake- reduction in filtration, washing as well discharge time.- reduction of washing liquid consumption due to more homogeneous cake structure.- increased uniformity in dewatering of the filter cake.- improvement in cake release from the filter press. - saving in filtration process cost and time.    membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.

The Membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber. The replaceable membrane are either from Rubber or EP family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness. Due to Squeezing process the Membrane Plates offers following advantages.– Reduction in Moisture content in the final filter cake– Reduction in Filtration, Washing as well discharge time.– Reduction of washing liquid consumption due to more homogeneous cake structure.– Increased Uniformity in dewatering of the filter cake.– Improvement in cake release from the filter press.– Saving in filtration process cost and time. Membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

The Agitated Nutsche filter is a Nutsche type filter designed to separate solids from liquids. It is totally enclosed and is normally operated under pressure or under vacuum. Additionally, the equipment is fitted with a stirrer mechanism which efficiently agitates the slurry during cake washing, smoothens and squeezes the cake during filtration and assists in the automatic discharge of the cake.

plate type filter, recessed chamber filter plate

Automatic Filter Press, screw type filter press, retched type filter press

Screen Filters, Sand Filters, L Type Screen Filter, Metal Body Disc Filter

Manual Filter Press, Cast Iron Filter Press

bike oil filter, bike meter wire, bike speedometer, brake drum cover

Filter Press

excavator filter, excavator pin, Excavator Swing Motor

Oil Remover, Pickling & Passivation Chemicals