Pressure Filter Dealers in Gandevi, Navsari

Hydraulic Filter Press Manufacturer in the national and international markets. It operates on a hydraulic system, powered using hands or motorized power pack for opening and closing. The locking system in the Hydraulic Cylinder is of Pull back type which is chrome plated and had double action.

each fitted with a durable permeable cloth. The recessed plates are pushed together in normal operation. The pressure required for dewatering is provided by the feed pump. During the filtration cycle the sludge is initially pumped into the chambers at a high rate. This rate is reduced as the chambers are filled and the pressure builds. The cloths retain the solids, allowing water to pass through as filtrate. Once the pressure in the press reaches a set point and the filtrate is reduced to a trickle the dewatering cycle is complete. The next stage of the process is to empty the press by opening the plate chambers and allowing the dewatered cake biscuits to drop out. This entire operation can be a manual, semi automated or fully automated process. Once the press is empty the plates are returned to the closed position, ready for further batches. The manual filter press unit is fitted with a hand pump, and is ideal for small sludge volumes. The semi-automatic filter press range, with a hydraulic pump for plate pack closing. The fully automatic machine includes automatic plate shifting, plate vibration and drip trays. A number of options are available to assist ease of operation for all models, including the Air-Track plate shifter, membrane plates for increased filtration pressures.

• Automatic Grade: Automatic, Semi-Automatic, Manual
• Features: Easy installation, Highly efficient, Low maintenance
• Filter Size: 16x16 mm, 12x12 mm, 24x24 mm, 30x30 mm, 36x36 mm
• Filter Type: Hand Taittinger, Rochit Type, Hydraulic Taittinger
• Filtration Capacity: >3000 litres/hr
• No Of Plates: >50
• Filter Area: 400-500 m2

• Size: 305mm X 305mm

Filter plate Recessed chamber plate,Gasket chamber plate,Non-gasket chamber plate, Membrane squeeze plate,Plates and Frames up to 6kgcm2 operations,5 kgcm2 to 15kgcm2 operations.

We are a major Automatic Filter Press Manufacturer from India providing advanced technology for optimum filtration. Operation is initiated by a push button activated manually. The whole system of our Automatic Filter Press is controlled by computerized mechanism that leaves no room for error. The PLC mechanism controls cycle times, phases and the ancillary equipment as well. Use of modern filter fabrics ensures easy cake discharge, while the removal of restrictions produces uniform cakes

• Weight: 100-1000kg
• Condition: New
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Mechanical
• Warranty: 1year

These are advance version of Recessed Chamber Closed configuration plates, where Filter Cloth is caulked in the caulking groove around the recess plate. Major benefits of this design are Zero leak Recess Type Filter Plate because ‘O’ Ring seats around the sealing edge and filtrate hole secure tight seal when the plate pack is closed. Cloth caulking groove provide easy installation and least maintenance of the filter cloth. CGR plates are recommended and necessary for leak proof conditions like toxic substance, acidic solutions etc. ‘O’ Ring are available in the different elastomers like EPDM, Neoprene, viton etc. These plates are available with center, top, bottom and corner feeding with adaptable diameter and designed at 8 and 16 bar operating pressure.

The Agitated Nutsche filter is a Nutsche type filter designed to separate solids from liquids. It is totally enclosed and is normally operated under pressure or under vacuum. Additionally, the equipment is fitted with a stirrer mechanism which efficiently agitates the slurry during cake washing, smoothens and squeezes the cake during filtration and assists in the automatic discharge of the cake.

the membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber.      the replaceable membrane are either from rubber or ep family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness.     due to squeezing process the membrane plates offers following advantages.- reduction in moisture content in the final filter cake- reduction in filtration, washing as well discharge time.- reduction of washing liquid consumption due to more homogeneous cake structure.- increased uniformity in dewatering of the filter cake.- improvement in cake release from the filter press. - saving in filtration process cost and time.    membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

We manufacture Semi Automatic Filter Press with electro mechanical plate shifting device for individual Plate shifting with a Pick and Plate type Reciprocating shuttle. For shifting with total speed control, Hydraulic or electric motor is used. We offer the highly efficient Semi Automatic Filter Presses.

The Membrane filter plates are the technological development of the recessed plates. These elements come with variable chamber depth which is adjusted depending upon the filterability and quality of slurries to be treated. Mixed pack membranes are the most common & cost effective configuration where the membrane and recessed plates are set alternatively so every second plate is provided with flexible and replaceable filter face of rubber on both the side. This configuration allows variable chamber depth through membrane squeezing. These plates are mainly used to increase the cake dryness (reduce moisture content), shorten filtration, effective washing and discharge time and they are achieve by inflating the flexible membrane diaphragm filter face, contrary to conventional plates. For inflation of membrane generally water or air pressure is used by pumping in the squeezing chamber. The replaceable membrane are either from Rubber or EP family which has great advantage of elasticity gives extreme deflection of membrane so the final cake receive the consistent high dryness. Due to Squeezing process the Membrane Plates offers following advantages.– Reduction in Moisture content in the final filter cake– Reduction in Filtration, Washing as well discharge time.– Reduction of washing liquid consumption due to more homogeneous cake structure.– Increased Uniformity in dewatering of the filter cake.– Improvement in cake release from the filter press.– Saving in filtration process cost and time. Membrane plates are available with center, top center and corner feed designs for up to 16 bar operating pressure.

Automatic Filter Press, screw type filter press, retched type filter press

plate type filter, recessed chamber filter plate

Cast Iron Filter Press, Manual Filter Press

Screen Filters, L Type Screen Filter, Metal Body Disc Filter