Keykeer Korb Enterprises Nilgiris, Tamil Nadu

V 900 Article number: DV10112 Manufacturer number: V 900 Year of construction: 2008 Condition: Needed Location: Germany Availability: from now on Vertical sputtering system with magnetron sputtering for laboratory systems, V 900Model: V900Year of manufacture: 2008General:The LAB Tool V900 is a vertical sputtering system for laboratory applications. The entire chamber is tilted. The carrier is driven by a bevel gear. The substrates can be transported with or without a carrier. The carrier is guided on the top. In the case without a carrier, the glass rests on rollers. The lower edge of the glass remains at the same level with or without a carrier.The changeover time for changing from one carrier to another should be less than 1 day, including readjustment and commissioning.   The temperature is up to 400°C.In the LL, the glass is heated from the back and cooled from both sides. At PM1 and PM3, the glass is heated from both sides. At the PM2 (cathode), the glass is heated from the back.At the PM, the entire glass moves from left to right and rotates back in front of the cathode during the coating process until the desired layer thickness is reached. The glass is heated during the process to keep the temperature uniform.  The glass bending is +/-3 mm maximum.Basic features:- Modular design based on 2 chamber types Type A: load lock; load bufferType B: process and extension chamber with door for process equipment- Chambers and carriers inclined by 6° (backwards) - A substrate of up to 600 mm × 600 mm (HxL) can be placed on a carrier of 650 mm × 600 mm- Loading/unloading of substrates from the front of the carrier - The substrates are held by gravity (no fasteners)- A spare magnetron position for later extensions- PLC control. A PC is used for data recording- System completely sealed with Viton rings (no rubber or silicone)Module: LLApplication: Load lockTurbopumps: Turbopump TMP-1503LM ISO 250 CE2-point slide valve DN250: 1x pendulum valve type 16.2, DN 250Backing pump: Dry vacuum backing pump SIHI GDV0400S**1K1Module: PMApplication: Extension and processTurbopumps: 2x Turbopump TMP-1503LM ISO 250 CEBacking pump: Dry vacuum backing pump SIHI GDV0400S**1K1Process gas: Ar, Ar/O2, adtl. GasMFC: 4Power supply: SUMMIT 25/25 400/480 PFP YYLug 82AVacuum chambers:Loading station LO- Manual doorLoading lock module LLRectangular chamber made of stainless steel with water channels for cooling the chamber. Internal dimensions: 850 mm × 1200 mm × 280 mm (L × H × D)Chamber wall thickness: approx. 25 mmMaterial: stainless steel DIN 1.4301 (standard hot rolled)- 1 × service door on the front - 1 × HV pump flange DN 250.- 1 × forevacuum pump flange DN 63- 3 × flanges for vacuum gauges and accessories.- 1 × inspection window DN 63 on the top of the chamber.- additional flanges for carrier drive, 2 spare flanges NW40, etc.- 1 × pneumatically operated chamber door Dimensions: 80 × 1000 (W × H) Limit switch for the open/close positionProcess module PM1 to PM3 (PM2 = sputtering)Rectangular chamber made of stainless steel with water channels for chamber cooling. Internal dimensions: 2450 mm × 1200 mm × 280 / 415 mm (L × H × T /D source)Wall thickness of the chamber: approx. 25 mmMaterial: stainless steel DIN 1.4301 (standard hot-rolled)- 1 × process door for two magnetron cathodes (900 mm target length) Tilt drive with motor for cathode service.- 2 × service door on the front- 2 × HV pump flange DN 250- 1 × forevacuum pump flange DN 63- 5 × flanges with window for pyrometer (blind flange) per service door - 4 × flanges for vacuum gauges and accessories.- 3 × viewing opening DN 63 at the top of the chamber.- additional flanges for vent valve, gas inlet, carrier drive, 3 spare flanges NW40, etc.- 5 × set of chamber protection plates with 4 individual plates each- 1 × pneumatically driven gate valve Dimensions: 80 × 1000 (W × H) Limit switch for open/closed positionVacuum pumps and valves- 1 × high vacuum gate valve DN250 ISO-K with pneuma

Brand Name : VON ARDENNE V 900

Material : Metal

Finishing : Chrome Finish

Shape : Square

Color : Gray

Condition : Used

Power : 120 kw

Pressure : Low Pressure, Medium Pressure, High Pressure

Usage : Automotive Industry

Voltage : 440V

Overall Length : 900 mm

Size (mm) : 900 mm

Dimension (LxWxH) : 2450 mm × 1200 mm × 280 / 415 mm

Thickness : 25mm

Rated Current : automatic residual current circuit

Phase : Three Phase

Country of Origin : Europe

Machine Structure : Vertical

Compressed Air Required : inlet unit with filter and pressure reducer - PLC-controlled compressed air valve island for operati

TRUMPF 1880203 TruPlasma RF 3020 Article number: DV10116 Manufacturer: TRUMPF Manufacturer number: 1880203 Type: TruPlasma RF 3020 Condition: Needed Location: Germany Availability: from now on TRUMPF Hüttinger GmbH + Co. KG RF Generator 13.56MHz, 20kW, 1880203, TruPlasma RF 3020Model: 1880203Type:  TruPlasmaRF3020

Brand Name : TRUMPF

Color : Brown, Grey

Condition : Used

Automation Grade : Automatic

Product Power : 15-20kw

Certification : CE Certified, ISO 9001:2008

Operating Temperature : 5°C - 40°C

Output Type : AC Three Phase

Type : Rf Signal Generator,TruPlasmaRF3020

Frequency : 13.56 MHz

Resolution : N/A

Commodity : RF Generator for plasma applications

Cooling System : Water Cooling

Country of Origin : GERMANY

Speed : N/A

Techman TM12-1300 TM12(M) Article number: DV10119 Manufacturer: Techman Manufacturer number: TM12-1300 Type: TM12(M) Operating hours:

Type : TM12(M)

Brand Name : Techman

Color : Black

Country of Origin : EUROPE

Seho MR36/12 MaxiReflow 3.6-12 Article number: DV10092 Manufacturer: Seho Manufacturer number: MR36/12 Type: MaxiReflow 3.6-12 Serial number: 07111252451 Year of construction: 2007 Condition: Needed Location: Germany Availability: from now on SEHO Systems GmbH Reflow soldering system oven - soldering system, MaxiReflow 3.6 12, MR36 12Model: MaxiReflow3.6/12Type: MR36 12Year of manufacture: 2007General:The MaxiReflow 3.6-12 is a highly developed reflow soldering system, designed for the demanding requirements of modern electronics manufacturing. This machine impresses with its high efficiency and precision and is therefore the optimal solution for the series production of printed circuit boards. The MaxiReflow 3.6-12 ensures outstanding soldering quality thanks to its precise temperature control and even heat distribution.Thanks to its robust construction and the use of first-class materials, the machine offers a long service life and requires only minimal maintenance. In addition, the MaxiReflow 3.6-12 is equipped with user-friendly interfaces and intuitive operation, which simplifies integration into existing production processes.With its high level of flexibility, the MaxiReflow 3.6-12 is able to process a wide range of circuit board sizes and types, making it ideal for the diverse requirements of the electronics industry. The efficient extraction system also ensures a clean working environment and reduces emissions to a minimum.Configuration:KE68001112 - MaxiReflow 3.6 frame, running direction LR, in RAL 9002/5012    The MaxiReflow machine frame is a solid and compact steel construction for minimal space requirements.    Features:    - Length of the heating cassette 3.6 m    - Total length of the system: approx. 6.50 m    - Inlet height: 840 ± 25 mm    - Transport direction from left to right    - Powder coating in RAL 9002/5012    DE: Wiring according to European standard (230/400V)KE680025122.DE - Double track transport ADC1 ("asymmetric dual conveyor"), 1 chain center support, adjustment via rocker switch, pin chain 3 mm    - maximum usable width of a track is 415 mm;    - Transport profiles: front (first profile) fixed, second and third profile connected to each other and movable together, fourth profile also movableKE68004410.DE - Heating cassette MaxiReflow 3.6/12 zones    The process length of 3.6 m is divided into the individual zones as follows:    Preheating:    - 8 zones of 300 mm    each Peak zone:    - 4 zones of 300 mmeach KE68005110.DE - Closed cooling module 1200 mm, 2 heat exchangers, for cooling water provided by the customer    The cooling of the circuit boards is achieved by a 1200 mm long cooling module in which two heat exchangers are positioned. These in turn are supplied with cooling water.    Rule of thumb for consumption: 8 l/min at a flow temperature of 8 °C, 10 l/min at a flow temperature of 10 °C, 12 l/min at a flow temperature of 12 °C.    Features:    - Length of the cooling module: 1200 mm        - Regulation of the circulating air temperature in the cooling module by regulating the inflow    - Circulation by two fan wheels    - Heat exchanger positioned at the bottom of the cooling module, removable    - Nozzle fields in the cooling module divided and removable for maintenance purposesKE68001312 - Doors + hoods for the frame in RAL 9002/5012KE68009140 - SMEMA elevation to inlet height 940 +/- 25 mmKE68007120 - N2 operation MR36    The system is fully prepared and set up for nitrogen operation at the factory.    The nitrogen supply line (6 - 8 bar, R 1/2'') can be connected directly to the system.    Features:    - Gas injection into the volume of the heating cassette, in the inlet tunnel, in the cooling module and at all axis passages of the fan motors.    --> Please note the information about the defect!KE68008521 - Maxireflow calculator, GermanKE68008130 - Acoustic alarm function ("horn")    In addition to the red warning light, an acoustic signal is emitted in the e

Driven Type : Electric

Color : Light Blue

Condition : Used

Voltage : 440V

Type : MR36 12

Brand Name : Seho

Schlötter Galvanotechnik 41 station anodizing system Article number: DV10071 Manufacturer: Schlötter Galvanotechnik Manufacturer number: 41 Station Type: anodizing plant Year of construction: 1991 Condition: Needed Location: Switzerland Availability: from 05/2025 Schlötter Galvanotechnik anodizing system with 41 stationsModel: System with automatic goods transport for processing rack goodsYear of construction: 1991Data:Power supply: 3x380 V, 50 Hz with resilient neutral conductorCompressed air: approx. 6 barHeating medium: Hot water 118/105 degreesSize: 41 stationsDesign: 1-lane transfer system with loading and unloading point on one endGoods window: 3000x900x300mmMaximum current consumption per goods carrier: 3000 ampsMachinery and equipment:Anodizing system with 41 stationsControl cabinet, modernization of the control system 2008Cooling system for anodizing baths, modernization 2010Rectifier for anodizing bathsCompressor for air injection into rinsing bathsAVA, wastewater pretreatment system, modernization Dec 2019Fresh water treatment system, new construction Dec 2019

Condition : Used

Power : 3-6kw

Application : Coating Use

Voltage : Semi Automatic

Type : Surface Coating Equipment, Anodizing Plant

Country of Origin : Switzerland

Safed TR5/21 TR5/21V Article number: DV10101 Manufacturer: Safed Manufacturer number: TR5/21 Type: TR5/21V Serial number: 11357 Condition: Needed Location: Germany Availability: from 03/2025 SAFED SA du Four Électrique cleaning system, washing drum, washing system, TR5 21VModel: TR521Type: TR521VData main connection:Voltage: 380V ACCurrent: 31AFrequency: 50HzPower: 20kWTemp. max.: 120°CData TR5/21V:Voltage: 380V ACCurrent: 23APower: 15kWTemp. max.: 80°C

Material : Stainless Steel

Finishing : Powder Coated

Shape : Rectangular

Condition : Used

Power : 3-6kw

Pressure : Medium Pressure, High Pressure

Power Consumption : 20kW

Speciality : High Performance

Usage : Industrial

Certification : CE Certified

Voltage : 380V

Density : Specify if applicable, typically related to the cleaning fluid

Packaging Type : Wooden Box

Tank Capacity : Specify based on design, commonly around 100-500 liters

Overall Length : 65mm

Size (mm) : 200mm

Overall Dimension : 580x360x385mm

Wash Capacity : 500 kg per hour

Type : Degreasing Machines

Diameter : Specify as per design or tank structure

Thickness : Specify as per design

Appearance : Polished Exterior

Machine Weight : 2000-3000kg

Frequency : 50 Hz

Phase : Three Phase

After-Sales Service Provided : Yes

Operating Mode : Automatic

Corrosion Resistance : Yes

Machine Structure : Horizontal

Main Brush Width : 400-500mm

Dirt Container Volume : 50 LTR

Maximum Moisture : Specify tolerance; generally low for drying cycles

Quick Wash Time : Typically 5-10 minutes per cycle

Safed T 40/36-T/GM 40/Prop 25 Article number: DV10100 Manufacturer: Safed Manufacturer number: T 40/36-T/GM 40/Prop 25 Serial number: 11354/55/56 Year of construction: 1989 Condition: Needed Location: Germany Availability: from 03/2025 SAFED SA du Four Électrique electric continuous line hardening furnace with protective gas and oil bath, T 40 36 T GM 40 Prop 25Model: T4036TGM40Prop25Year of manufacture:  1989General:This system is a T-type continuous line furnace with a conveyor belt used for various heat treatment processes.This furnace is ideal for the precise and reproducible heat treatment of metallic components in a protective gas atmosphere. It offers various zones for temperature control and an integrated quenching device that can be adapted to suit the application.Technical data:Max. temperature: 950°CElectrical data main connection:Voltage: 380V ACCurrent: 140AFrequency: 50HzPower: 74kWApparent power: 6kVAElectrical data control voltage:Voltage: 220V ACApparent power: 0.8kVAVoltage: 24V DCApparent power: 0.2kVA

Brand Name : Safed

Driven Type : Electric

Color : White

Condition : Used

Power : 21-24Kw

Automation Grade : Semi Automatic

Application : Heating Process

Voltage : 380V

Type : Conveyor Furnace,T4036TGM40Prop25

After-Sales Service Provided : Yes

Rommel BMD 500-2 S Article number: DV10095 Manufacturer: Rommel Manufacturer number: BMD 500-2 S Serial number: 350-056 Year of construction: 2004 Condition: Needed Location: Germany Availability: from now on Rommel GmbH a Mühlbauer Company Transport module, BMD 500 2 SModel: BMD5002SYear of manufacture: 2004Electrical data:Nominal voltage: 230V ACFrequency: 50HzCurrent: 2A

Finishing : Polished

Driven Type : Electric

Shape : Rectangular

Color : White

Condition : Used

Pressure : Medium Pressure, High Pressure

Voltage : 220V

Rated Current : 2A

Frequency : 50Hz

Phase : Three Phase

Operating Mode : Automatic

Machine Structure : Vertical

Pfeiffer Vacuum PM P03 020 GA + PM C01 713 TPH 2101 P + TC 750 Article number: DV10077 Manufacturer: Pfeiffer Vacuum Manufacturer number: PM P03 020 GA + PM C01 713 Type: TPH 2101 P + TC 750 Serial number: 15040169 + 0805014349 Operating hours: approx. 13,000 hours Condition: Needed Location: Germany Availability: from now on Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, PM P03 020 GA, TPH 2101 P + PM C01 713, TC 750Turbo pump model:  PMP03020GA, TPH2101PDrive electronics model: PMC01713 ,  TC750Turbomolecular pump:Serial number: 15040169Nominal connection diameter inlet: DN 250 ISO-KNominal connection diameter outlet: DN 40 ISO-KFVent connection: G1/8"Nominal speed: 31,500/min (525Hz)Suction speed N2: 1,900l/sMax. fore-vacuum pressure N2: 1.5mbarMax. fore-vacuum pressure He: 1.0mbarMax. fore-vacuum pressure H2: 0.5mbarOil: PM 016 144-TDrive electronics:Serial number: 0805014349Input: 24/48/72/140V DC +/-5%, 5.4AOutput: 0-140V AC, 0-1600Hz, 6.5ANote on condition:1. Statements on operating hours are approx. 13,000h with approx. 1,600 starts and shuts down.2. Process gases: nitrogen and argon3. Process dust: chromium nitride and steel 100Cr64. The pump was stored in full working order in 2018 and cleaned externally.

Driven Type : Electric

Pressure : Medium Pressure, High Pressure

Type : High Vacuum Pumps,TPH 2101 P + TC 750

Country of Origin : GERMANY

Pfeiffer Vacuum PM P03 020 GA TPH 2101 P + TIC 250 Article number: DV10078 Manufacturer: Pfeiffer Vacuum Manufacturer number: PM P03 020 GA Type: TPH 2101 P + TIC 250 Serial number: 14219214 Operating hours: approx. 13,000 hours Year of construction: 2008 Condition: Needed Location: Germany Availability: from now on Pfeiffer Vacuum GmbH Turbomolecular pump with drive electronics, Profibus DP gateway and accessories, PM P03 020 G, TPH 2101 P + TIC 250Turbo pump model:  PMP03020G, TPH2101PGateway model: TIC250Turbomolecular pump:Serial number: 14219214Year of manufacture: 2008Nominal connection diameter inlet: DN 250 ISO-KNominal connection diameter outlet: DN 40 ISO-KFVent connection: G1/8"Nominal speed: 31,500/min (525Hz)Suction speed N2: 1,900l/sMax. backing pressure N2: 1.5mbarMax. backing pressure He: 1.0mbarMax. backing pressure H2: 0.5mbarOil: PM 016 144-TNote on condition:1. Statements 13,000 hours of operation with approx. 1,600 starts and shuts down.2. Process gases: nitrogen and argon3. Process dusts: chromium nitride and steel 100Cr64. The pump was stored in fully functional condition in 2018 and cleaned externally.

Color : Silver

Type : PMP03020G, TPH2101P, TPH 2101 P + TIC 250

Oerlikon Leybold Vacuum 155153 WHU 4400 PFPE Article number: DV10113 Manufacturer: Oerlikon Leybold Vacuum Manufacturer number: 155153 Type: WHU 4400 PFPE Serial number: 31000818751 Year of construction: 2013 Condition: Needed Location: Germany Availability: from now on Oerlikon Leybold Vacuum GmbH RUVAC Roots vacuum pump with PFPE filling, L41000 oil, 155 153, WHU 4400 PFPEModel: 155153Type:  WHU4400PFPESerial number:  31000818751Year of manufacture: 2013400/460V AC18.5kW4,400m3/h30mbar

Country of Origin : EuropePFPE

Weight : 1000-200kg

Type : Roots Pumping Systems, WHU 4400 PFPE

Certification : CE Certified

Application : Industrial Use

Material : PFPE,robust Materials

Brand Name : Oerlikon Leybold Vacuum

MKS QL10513 SurePower Article number: DV10114 Manufacturer: FMD Manufacturer number: QL10513 Type: SurePower Condition: Needed Location: Germany Availability: from now on MKS Instruments. Inc. RF Generator 13.56MHz, 10.5kW, QL10513, SurePowerModel: QL10513Type:  SurePower

Brand Name : MKS Instruments

Material : High-quality metals, typically aluminum or stainless steel

Automatic Grade : Semi Automatic, Manual

Power : 10.5 kW

Produce Power : 13.56

Usage/Application : Sputtering, plasma etching

Size : Compact, usually standardized for rack mounting

Model Number : QL10513

Certification : CE Certified

Length : 19-inch

Voltage : 200-240V AC

Capacity : 10.5 kW RF

Output Type : RF power output

Fuel Type : Not applicable

Fuel Tank Capacity : Not applicable

Type : Generator Set

Frequency : 13.56 MHz

Phase : Single Phase

Air Flow : Air-cooled with integrated fans

Ambient Temperature : 0°C to 40°C

Cooling System : Air Cooling

Country of Origin : Europe

Current : Based on standard industrial power specifications

Finish : Industrial-grade, powder-coated

Height : Not applicable

Stroke : Not applicable

MKS AX7670-60-R ASTRONi Article number: DV10115 Manufacturer: FMD Manufacturer number: AX7670-60-R Type: ASTRONi Condition: Needed Location: Germany Availability: from now on MKS Instruments. Inc. Plasma Generator, AX7670 60 R, ASTRONiModel: AX767060RType:  ASTRONi200-208V AC50/60Hz30A

Brand Name : MKS INSTRUMENTS,AX767060R

Material : Steel

Texture : Hard

Surface Finishing : Polished

Color : BLACK

Form : Solid

Speciality : Chemical Resistant, Optimum Quality, High RF Stability

Usage : Industrial Use, Wall Coating

Certification : ISO 9001:2008

Purity : Not applicable

Pattern : Plain

Grade Standard : Industrial Grade

Density : Not applicable

Packaging Type : Wooden Box

Packaging Size : based on transport requirements

Shelf Life : long operational life with regular maintenance

Softening Point : Not applicable

Melting Point : Not applicable

Compressive Strength : specifics vary

Country of Origin : Europe

Moisture : Moisture-resistant design for long-term durability

Specific Gravity : Not applicable

Waterproof : Yes

Acid Value : Not applicable

Melting Temperature : Not applicable

Soluable In Water : No

Curing Time : Not applicable

Weight Per Litre : Not applicable

Dry Film Thickness Range : Not applicable

Volume Solid : Not applicable

Surface Dry Time : Not applicable

Recommended No. Of Coats : Not applicable

Mixing Ratio : Not applicable

Overcoating Time : Not applicable

Pencil Hardness : Not applicable

Humidity Cabinet : Not applicable

Copper Strip Corrosion : Not applicable

Meyer Burger Phase-3 JETx-P Article number: DV10089 Manufacturer: Meyer Burger Manufacturer number: Phase-3 JETx-P Year of construction: 2020 Condition: New Location: Germany Availability: from now on Meyer Burger (Netherlands) BV / Süss Phase-3 JETx-P Inkjet Printer Systems for 1200WphSystem Description:The PiXDROTM JETx-P inkjet printer is a mass production system specifically designed for photovoltaic applications. The JETx is a modular system that offers cost-effective, specific solutions for substrate handling, pre- and post-processing options, various throughput configurations and a range of control options. Scope of delivery: Automatically loaded wafer handler - Compatible with Jonas & Redmann cassettes - RFID cassette detection - In-line layer thickness measurement module - In-line module for measuring wafer size and wafer breakage Inkjet printing station - 2 wafer lanes, 2 chucks per lane - Software for individual wafer scaling and resolution correction - 2 wafer preheating modules (one above each lane) - 4 heated wafer chucks with vacuum clamping - Wafer edge alignment vision system - Print head unit with six KM1024i print heads (2 rows of 3 print heads each) - 2 post-print wafer drying modules (one above each lane) - Automated ink supply with buffer tank and barcode identification - Print head maintenance module (rinse, wipe, spit and replace) - Downward HEPA filtration for a clean processing environment Automated optical inspection module:- Custom vision system for pattern recognition - 2 line scan cameras with lighting modules (100% wafer inspection) - Wafer handler Other:- MES integration and license (see document "MES - Machine Interface, Version 3.0.22.1.0") - Software interface to the Jonas & Redmann wafer handling module - On-site installation and commissioning - Operation and maintenance training (max. 1 week) - User documentation for operation and basic maintenance (in English and German) Notes: Post-print drying:The concept provides for heating the wafers after printing and includes an IR source and a dry air stream for solvent evaporation. It assumes that the required drying time does not limit the overall throughput. Layer thickness measurement:The inline layer thickness measurement module offered is a spectral reflectrometer, type Sentech FTPadv Inline. This device has not yet been qualified for the intended purpose. Qualification takes place during the design and development phase.Wafer preheating:The concept involves heating the wafers with an IR source before printing. It is assumed that the required  preheating time does not limit the overall throughput. Detection of wafer size and wafer breakage:An additional high-resolution camera module is installed in the wafer handling module to measure the size of each individual wafer and possible damage.

Driven Type : Electricity

Color : White

Condition : Used

Automatic Grade : Automatic

Power : 220V

Application : Industrial

Model Number : Phase-3 JETx-P

Printing Type : Inkjet Printer

Plate Type : N/A

Packaging Type : Plywood Box, Carton

Maximum Paper Size : N/A

Type : Inkjet Printer

Print Method : Inkjet

Metrel 1025 442/0-10/0 Article number: DV10105 Manufacturer: Metrel Manufacturer number: 1025 Type: 442/0-10/0 Serial number: AX6359 Year of construction: 2004 Condition: Needed Location: Germany Availability: from 01/2025 Metrel SpA Laser marking system, 1025, 442 0 10 0Model: 1025Type:  4420100Year of manufacture: 2004Serial number: AX6359General:Inv. no.: 7004878Electrical drawing: 02.1471.0Customer electrical drawing: 048781Laser data:Power: 25WPower: 200kWPulse: 5-65nsFrequency: 1-400kHzWavelength: 1064nmElectrical data:Nominal voltage: 400V ACFrequency: 50HzCurrent at full load: 6.6ASwitching capacity: 120kA

Features : High pumping speed, Corrosion resistance, Compact design, Laser marking system,

Brand Name : Metrel

Driven Type : Electric

Color : Grey

Condition : USED

Automatic Grade : Semi Automatic

Application : Laser Marking on Metals and Industrial Components

Voltage : 440V

Type : Laser Marking System

Phase : 3phase

metrel 1017 442/0-2/0 article number: dv10104 manufacturer: metrel manufacturer number: 1017 type: 442/0-2/0 serial number: ax6351 year of construction: 2004 condition: needed location: germany availability: from 01/2025 metrel spa laser marking machine, 1017, 442 0 2 0model: 1017type:  442020year of manufacture: 2004serial number: ax6351general:inv.-no.: 70048773electrical drawing: 02.1466.0customer electrical drawing: 048773rofin laserelectrical data:nominal voltage: 400v acfrequency: 50hzcurrent at full load: 6.6aswitching capacity: 120ka

Features : High pumping speed, Corrosion resistance, Compact design

Brand Name : METREL,Metrel

Driven Type : Electric

Color : White

Condition : USED

Rated Power : 3-5kw

Automatic Grade : Semi Automatic

Application : Laser Marking on Metals and Industrial Components

Voltage : 440V

Type : Laser Marking System,442020

Weight : 4000-6000kg

Phase : 3phase

Krautzberger GmbH SKID 30-U9 Article number: DV10080 Manufacturer: Krautzberger GmbH Manufacturer number: SKID 30-U9 Year of construction: 2002/2003 Condition: Needed Location: Germany Availability: from now on Krautzberger GmbH paint spraying machines and systems automatic paint spraying system for furniture fittings, painting system SKID 30 U9System components:The entire surface treatment system consists of the following main components:- Water-flooded spray booth with automatic paint sludge discharge device- Booth housing as a closed booth with integrated supply air filter ceiling- Evaporation booth with supply air filter ceiling and exhaust air system- Supply air system- Drying booth with recirculation/exhaust air system- Driven conveyor as a skid system including workpiece holders- 3-axle spray device with automatic spray guns- Paint supply system- Equipment for daily paint storage/paint preparation room- Paint spray wall as a manual work station- Switching and control systemScope of delivery:Steel booth construction- Side wallcladding - Booth ceiling -Support structure- Pneumatically controlled sliding doors at the dryer inlet and outletRecirculation device- Profile frame construction- Fan section- Heater section with insertable Cu/Al heat exchanger, steel collector for hot water- Mixing and filtering section, pocket filter with pull-out filter pockets of quality class EU4- canvas nozzleduct system- front-side blow-in via vertical filter wall- front-side extraction (opposite blow-in) via vertical filter wall- connecting ductsexhaust air system- piping system NW250- regulating flap NW250- deflector hood NW250Painting system:Manufacturer: SPMA Spezialmaschinen GmbHModel: SKID30U9Serial number: 80808/0103Year of manufacture: 2002/2003Voltage: 400V ACFrequency: 50HzOutput: 12kWContinuous drying booth:The dryer capacity is designed for 11 skids.Usable space dimensions: 2.1x6.5x1.94m (WxLxH)External dimensions: 2.22x7.22x3.2m including recirculation unit (WxLxH)Recirculation air volume: 6,000m3/hExhaust air volume: 500m3/hSupply air volume (from hall): 500m3/hBlow-in temperature: approx. 65°C, continuously adjustableHeating medium: hot water 90/70°CHeating output: approx. 40kWFilter: EU4 pocket filterDrive motor: 2.2kWSupply air unit:Air volume: 9,000m3/hP-external: 250PaIntake temperature: -12°CBlow-in temperature: +22°CHeat output: 103kWHeating medium: hot water VL 70°C/RL 55°CMotor output: 2.2kWExtraction Evaporation area:Extracted air volume: 1,500m3/hFan: 0.37kW, Ex-versionSupply air system:Type: AT 4 16x12 (indoor installation)

Type : SKID 30-U9

Brand Name : Krautzberger GmbH

Color : GRAY

Country of Origin : GERMANY

Juki MB 702 Article number: DV10096 Manufacturer: Juki Manufacturer number: MB 702 Serial number: 16.33:1 Year of construction: 2016 Condition: Needed Location: Germany Availability: from now on Juki Corporation Electro Design GIMO transport module, MB 702Model: MB702Year of manufacture: 2016Electrical data:Nominal voltage: 100/240V ACFrequency: 50-60Hz

Brand Name : Juki

Finishing : Polished

Driven Type : Electric

Shape : Square

Color : White

Condition : Used

Pressure : Medium Pressure, High Pressure

Voltage : 220V

Capacity : 10-50kg/h

Width : 50mm, 60mm, 70mm

Packaging Type : Carton Box, Wooden Box, Metal Sheet Box

Overall Length : 65mm

Size (mm) : 400mm

Specialities : Long Life, High Performance

Type : MB 702

Thickness : 5mm To 20mm

Rated Current : 1A To 10A

Frequency : 50-60Hz

Phase : Three Phase

Accuracy : High Precision For Material Transport

After-Sales Service Provided : Yes

Operating Mode : Automatic

Spindle Speed : Not Applicable

Corrosion Resistance : Yes

Machine Structure : Horizontal

Tear Resistance : Robust For Industrial Use

Compressed Air Required : 4-6 Bar

Is It Variable Speed : Yes

Spindle Torque : N/A

Moisture Resistance : Designed To Be Resistant To Moisture

Tamper Resistant : Designed To Be Tamper-resistant In An Industrial Context

Ipsen VFC-124 Article number: DV10102 Manufacturer: Ipsen Manufacturer number: VFC-124 Serial number: 29238 Year of construction: 1979 Condition: Needed Location: Germany Availability: from 03/2025 Ipsen Industries International GmbH Vacuum Furnace, VFC 124Model: VFC124Year of manufacture:  1979Technical data:Heating: electricProtective gas: N2Gas absolute pressure min.: 13x10-5mbarGas absolute pressure max.: 1500mbarWorking temperature min.: 500°CWorking temperature max.: 1320°CCompressed air consumption Vn: 0.1m3/chargeCooling gas consumption Vn: 0.6m3/chargeQuenching type: gascooling Thermal insulation type: insulating woolMax. load weight: 60kgMethod of loading and unloading: by handChamber dimensions: 300x380x200mm (WxLxH)Total electrical data:Nominal voltage: 380V ACNominal current: 56AFrequency: 50HzPower: 37kVAElectrical data heating:Nominal voltage: 30V ACNominal current: 416/588AFrequency: 50HzPower: 25kW

Material : Stainless Steel

Shape : Round

Condition : Used

Power : 30kW

Power Source : Electric

Usage : Tools Heat Treatment

Packaging Type : Box

Type : Holding Furnace,VFC124

Frequency : 50 Hz

Accuracy : ±1°C

Ipsen G-750-E Article number: DV10099 Manufacturer: Ipsen Manufacturer number: G-750-E Serial number: 79238 Year of construction: 1979 Condition: Needed Location: Germany Availability: from 03/2025 Ipsen Industries International GmbH Protective gas generator, G 750 EModel: G750EYear of manufacture:  1979Electrical data:Nominal voltage: 380V ACFrequency: 50Hz

Driven Type : Electric

Color : GREEN

Condition : Used

Automatic Grade : Semi Automatic

Application : Heat Creation

Certification : CE Certified

Voltage : 380V

Type : Heat Treatment, Heat Treatment Equipment, G-750-E

Brand Name : Ipsen

Ipsen G-1500-E Article number: DV10098 Manufacturer: Ipsen Manufacturer number: G-1500-E Serial number: 57791 Year of construction: 1987 Condition: Needed Location: Germany Availability: from 03/2025 Ipsen Industries International GmbH Protective gas generator, G 1500 EModel: G1500EYear of manufacture:  1987Technical data:Heating: electricReaction gas: propaneGas overpressure min.: 10 mbarGas overpressure max.: 50 mbarWorking temperature min.: 980°CWorking temperature max.: 1020°CElectrical data overall:Nominal voltage: 380V AC, 3-phaseNominal current: 60AFrequency: 50HzPower: 22kVAElectrical data heating:Nominal voltage: 380V ACNominal current: 52AFrequency: 50HzPower: 20kW

Driven Type : Electric

Condition : Used

Automatic Grade : Semi Automatic

Application : Heat Creation

Certification : CE Certified

Voltage : 380V

Type : Heat Treatment

I&A DOBGS 7.5 1 50-10-0 + KAB 11.1 + DOBE 11 1 49-6.5-0 Article number: DV10084 Manufacturer: I&A Manufacturer number: DOBGS 7.5 1 50-10-0 + KAB 11.1 + DOBE 11 1 49-6.5-0 Year of construction: 2001 Condition: Needed Location: Germany Availability: from 01/2024 Industrial & Plant Engineering - Bad Königshofen Continuous system / hardening furnace → Consisting of the process stages: hardening, post-treatment and tempering Year of construction: 2001General:2001-2023 replacement of wearing parts during productionAvailability throughout the year 90%Control: S5Current system technology: Pusher grate furnace (made of cast steel)Tempering capacity max. 300 kg/h Carbonitriding capacity max. 100 kg /hThe system consists of the 7 main components:Continuous annealing furnaceQuenchingbath Oil storage tank Deoiling and washing station Manipulator Continuous tempering furnace Control cabinet How the continuous system works:- the system can temper and carbonitride on an oil bath basis- Process temperatures up to 930°C- Base or safety gas: (for O2 closure) nitrogen/methanol (as a carbon donor) is used- Process gas: natural gas or ammonia but can be converted to propane- the hardening area is heated with natural gas- the tempering furnace is operated with electricity- the round wire link belt has a width of 765mm (1.4864 Nb)1. Continuous annealing furnace:- Model: DOBGS 7.5 1 50-10-0 (cycled conveying, protective gas-tight outer skin, indirectly heated with Reku - radiant tube burners- External dimensions: Continuous furnace L x W x H = 7.85 x 2.10 x 2.25 m → annealing zone length 5.0 m; Conveyor belt width: 765 mm- Temperature: max. 980 °C +/- 5 K- Total heating output: 210 kW - using 14 Noxmat - steel tube burners manufacturer ALD with a jet pipe diameter of 150 mm- Temperature control zones: 3 heating and control zones (ie Zone1 - 6 x 15 = 90 kW; Zone2 - 4 x 15 = 60 kW; Zone3 - 4 x 15 = 60 kW)- Protective gas supply / control: 3 x nitrogen, methanol, natural gas, ammonia air each- Throughput speed: adjustable via frequency converter 2 to 7 m/h- Furnace time: approx. 75 min at 4m/h; adjustable from 38 to 135 min; Holding time 50 min at 4m /h- Transport device: Round wire link belt made of 1.4864 with 18 mm slatted edge- Protective gas consumption: Protective gas: nitrogen approx. 3 m3/h; methanol 3 l/h, natural gas 500-2000 l/h, ammonia 200-300 l/h, air 500 l/h- Lining: is lined with fireclay, ceiling with thermal insulation wool, condition: in need of repair- Electrical connection values ​​approx. 10 kW - Total weight approx. 15,800 kg2. Quenching bath model KAB 11.1:- suitable for quenching with oil- Structure: electrically driven circular conveyor, level difference detector, lifting platform, basket rotation device, bath heating, bath circulation, water cooling and dripping station- External dimensions: L x W x H = 2.80 x 2.50 x 2.00 [m]; fall height in the quenching oil = 1.0 [m] - Total weight with oil: approx. 16,000 [kg]- Connected load heating: 48 kW- Oil cooler HK4 - make Hering 2 x 2.2 kW- including level difference detector model NDM 100-03. Oil storage tank model B12.5:- suitable for holding the oil from the quenching bath with pump and carrying frame for centrifuge system- External dimensions: L x W x H = 4.20 x 2.50 x 1.55 m; max. filling height 1.40 m; max. volume 12.88 m34. Deoiling and washing station:- consisting of 1x centrifuge AZ 500 manufacturer WMV, 1 x washing machine WA 500, 1 x centrifuge AZ 500 H for drying - 8 cylindrical transport containers according to drawing 300 /864 /96 - drum height 500mm- connected load: approx. 15 kW5. Manipulator model MBM 63/1 - (500):- consisting of a mechanical cross slide for 6 positions and a mechanical lifting movement for 3 positions- a pneumatically operated tong for holding the basket including emptying the baskets through a separate tipping station6. Electrically heated continuous tempering furnace model DOBE 11 1 49-6.5-0:- continuously conveying, directly heated w

Color : Grey

Condition : Used

Certification : CE Certified

Type : Heat Treatment, Heat Treatment Equipment,DOBGS 7.5 1 50-10-0 + KAB 11.1 + DOBE 11 1 49-6.5-0

Brand Name : I&A

Material : METAL

Hyprema 70-9251/3 HES-16MP Article number: DV10106 Manufacturer: Hyprema Manufacturer number: 70-9251/3 Type: HES-16MP Condition: Needed Location: Germany Availability: from 01/2025 Hydraulische Pressen und Maschinenbau GmbH Hydraulic press, 70 9251 3, HES 16MPModel: 7092513Type:  HES16MPGeneral:Display: 0-400kp/cm2 / 0-25Mp

Brand Name : Hyprema

Material : Mild Steel

Finishing : Powder Coated

Shape : Rectangular

Color : GREEN

Power : 3-6kw

Pressure : 150-200 Bar

Automation Grade : Semi-Automatic

Usage : Sheet Bending

Model Number : 7092513

Certification : CE Certified

Voltage : 380V

Width : 70mm

Packaging Type : Wooden Crate

Control Type : CNC

Overall Length : 55mm

Working Pressure : 200 Bar

Type : HES16MP

Thickness : 20 mm

Weight : 2000-3000 kg

Machine Weight : 2000-3000kg

Frequency : 50 Hz

Phase : 3-Phase

After-Sales Service Provided : Yes

Height : Automatic

Operating Mode : Automatic

Product Name : Hyprema

Spindle Speed : 1400 RPM

Stroke : 500 mm

Corrosion Resistance : Yes

Machine Structure : Vertical

Tear Resistance : N/A

Reverse Rotation : No

Is It Variable Speed : Yes

Moisture Resistance : YES

Tamper Resistant : YES

Max Force or Load : 60-90 Ton

Cutting Load : Specify as per cutting requirement

Packaging Details : Standard Industrial Packaging

Capacity (Ton) : 1000-2000

Return Force (kN) : 500

Size Of Slide : 200x200 mm

Press Size : Standard

HWACHEON ECO VT 550 R Article number: DV10110 Manufacturer: HWACHEON Manufacturer number: ECO VT 550 R Serial number: M086 Operating hours: 41,550 Year of construction: 2006 Condition: Needed Location: Germany Availability: from now on Hwacheon Machinery Europe GmbH Vertical CNC turret lathe, ECO VT 550 RModel: ECOVT550RYear of manufacture: 2006Control: FANUC Series 18i-TBNumber of spindles:  1Spindle power:  22kWSpindle speed:  15-1500rpmNumber of turrets: 1Number of tool stations: 12Chip conveyor: 3508734Boring bar holder: d 50mmNote:The machine is still powered.

Color : Grey,White

Type : Vertical Lathe,M086

Material : Stainless Steel

Driven Type : Electric

Brand Name : HWACHEON

Country of Origin : South Korea

Finishing : Powder Coated

Shape : Rectangular

Condition : Used

Power : 7-9 KW, 9-12 KW

Automation Grade : Semi Automatic

Speciality : High Efficiency, Reliable, Robust Construction

Uses : Precision machining, Industrial Use, MetalworkinG

Certification : CE Certified

Voltage : 380V

Packaging Type : Wooden Box

Hardness : N/A

Bar Capacity : 50mm

Cross Slide Size : 380mm

Thickness : N/A

Machine Weight : 2000-4000 Kg

Rated Current : Approx. 20A

Frequency : 50 Hz or 60 Hz

Phase : Three Phase

After-Sales Service Provided : Yes

Control System : CNC

Product Name : HWACHEON-ECOVT550R

Spindle Speed : 15-1500rpm

Corrosion Resistance : Yes

LED Indicator : Yes

RPM : 15-1500 rpm

Cross Slide Travel : 250mm

Swing Over Bed : 550mm

Bed Width : 350mm

Bed Length : 1,200mm