Agricultural Pipes Dealers in Phase 2, Noida

Even in heavy loaded areas, where only the strongest – Galvanized iron, Ductile iron, Cement Pipe survive, Plastic in the form of HDPE has scored beyond doubt as an ideal substitute. HDPE is today, the internationally preferred piping material across an unbelievable range of applications (where strength & long life is key requirements). HDPE is also capable of handling even semi-solid and gaseous effluents and displays unmatched resistance to corrosive chemicals. In other words, where metal, cement and other forms of plastics fail to perform, HDPE pipes excel. HDPE Pipes are one of the two largest thermoplastic pipelines available and by far the most versatile. Polyethylene is a wax like thermoplastic with a density varying from a range of 934 Kg/m3 to 960 Kg/m3 which is less than that of water. The only two additives that are added to polyethylene are Carbon black with a limit of 2-3% to add some reinforcing effect to increase its weathering properties and some Anti-Oxidant to a limit of 0.3%. HDPE having comparatively high molecular weight is high in abrasion resistance and impact strength. It is also very good in stress cracking resistance and has low creep rupture properties. It is excellent in insulation properties over a wide range of frequencies and good chemical properties.   Features & Benefits of HDPE Pipes Very low frictional resistance to fluid flow and thus saves energy cost for pumping. UV resistant Low wear and tear and fully abrasion resistant. Remains free from incrustation throughout the life span giving better flow always. Suitable to withstand high fluid flow and external soil pressure. Chemically inert and hence resistant to most chemicals and hostile corrosive soils. Excellent impact resistance, withstands water hammer shocks and transverse loads due to thermal stresses. Bending radius is 25 times the pipe diameter. Excellent elastic properties ensure absorption of soil movements, stresses and Hydraulic pressure. HDPE pipes are easier to handle & install compared to heavier metallic or concrete pipes. HDPE is about one-eight, the density of steel and thus does not require the use of heavy lifting equipment for installation. CPE HDPE is BIS certified & manufactured in compliance with the relevant Indian standard IS 4984     Light weight facilitates easy handling and instant fixing. Joints obtained by Butt welding are homogenous and 100 % leak proof. Offers life of minimum 50 years. Available in single coil in lengths as required particularly the smaller diameter pipes. No additional joints, sockets, etc. are required. Ease of use with relining techniques avoiding opening of trenches, Outstanding ability to withstand Rapid Crack Propagation (RCP). Full joint traceability, ideal for renovation work through pipe bursting techniques, No requirements for protective coatings.  HDPE Pipes – Transportation of Potable Water as per IS 4984:2016, ISO 4427-1:2007: HDPE Pipes all over the world are widely used for conveyance of potable water, HDPE Pipes are non-toxic and do not impart any foul taste or smell to the water that is conveyed through it. They do not pose any damage through disinfectant also. HDPE Pipes – Drainage & Sewerage Disposal as per IS 14333:1996:  HDPE pipe for transportation of sewerage and industrial effluents are made as per IS: 14333:1996. The main advantages of HDPE pipes for conveyance of Sewerage and Industrial Effluents are. Resistance to chemical. Abrasion resistant. Resistant to treated or untreated water. Better mechanical properties including toughness. Greater burst strength due to flexibility. Excellent free flowing characteristics due to smoother inner surface. Higher longevity.  

• Material: PVC
• Shape: Round
• Thickness: 50-60mm, 70-80mm
• Certification: ISI Certified
• Length: 2000-3000mm
• Application: Plumbing
• Grade: AISI, BS
• Color: Grey
• Dimension: 10-100mm, 200-300mm

PVC has the distiction of being resistant towards almost all acids, gases and corrosive liquids. Ashish Pipes happens to be a leading manufacturer of pvc pipes Noida. The pipes made by us are non-toxic. They are available in Rubber Ring Socket Joint in addition to Solvent Weld Socket Joint. It range lies between twenty millimeters to five hundred and sixty millimeters. USES OF PVC PIPES - Internal plumbing Water and waste water providers - Household and Industrial Irrigation and scattering system Bore-well covering and suction power pipes Chemical handling plants Ventilation of harsh gases Air / Release system Effluent lines Ducting for power and interaction cables Re-lining of old sewers Surface water drainage Installation for the brewery pipelines Horticultural & Green house technology Irrigation of sports grounds Uses Of PVC Pipes made by Ashsish pipes a leading manufacturer of pvc pipes india The PVC pipes  are of high quality and have established us as a leading manufacturer of manufacturer of pvc pipes Noida.  They find wide use in portable water supply schemes, soil, water and rain water drainage systems, domestic or industrial plumbing, transportation of chemicals, rising main and distribution lines, lift and gravity irrigation systems  and  pum set suction and delivery pipes used in agriculture. They are also used in construction of buildings, in casing of tubewells, in brewary industries, in the disposal effluents and in telecommunication.

• Material: PVC
• Color: white and black
• Condition: New

• Type: Hdpe Pipe
• Material: HDPE
• Shape: Round
• Certification: ISI Certified
• Length: 1-1000mm, 1000-2000mm, 2000-3000mm, 3000-4000mm, 4000-5000mm
• Application: For Potable Water
• Color: Black
• Feature: Crack Proof, Excellent Quality, Fine Finishing, High Strength, Perfect Shape
• Finishing: Non Poilshed, Polished
• Dimension: 10-100mm, 100-200mm

ISI marked Pvc conduit pipe, pvc FRLS pipe, ISI marked pvc conduit fittingse. Colors available: ivory and black ( other colours on request) Standard length: 3 meters Sizes: 20, 25, 32, 40, 50 mm

• Feature: highly durable, designed precisely, rustproof, wear and tear-resistant
• Specification: The surface finish of our PVC pipe is very smooth,Smoothness ensures to reduce hydraulic friction,Internal and external threading ensures easy and reliable joining.,Allows more water to seep in,Right selection of designs, heat stabilizers, and impact

TECHNICAL DETAILS   Made from the best quality ,mild steel using the most modern high frequency Induction Tube Welding (Electric Resistance Welding) Technology on automatic tube mill. RM CON rigid steel conduit Pipes are available in sizes from 20mm to 50mm with two types of protective coatings against external influences.

EONN's High-Density Polyethylene Pipes (HDPE) are made frompolyethylene, a cost effective material used for a broad range of piping solutions in municipal, industrial, marine, mining, landfill, duct and agricultural applications. They have been subjected to the most gruelling of tests and proven effective for above ground, surface, buried, slip lined, floating, and sub-surface marine applications. EONN's HDPE Pipes carry potable water, wastewater, slurries, chemicals, hazardous wastes and compressed gases, with the greatest of ease. In fact, polyethylene pipes have a long and distinguished history of service to the gas, oil, mining and other industries. They have the lowest repair frequency per kilometre per year, as compared with all other pressure pipe materials used for urban water and gas distribution. EONN's HDPE Pipes are strong, extremely tough and very durable.Whether you're looking for long service, trouble-free installation,flexibility, resistance to chemicals or a myriad of other features, EONN's HDPE Pipes will meet all your requirements. THE UNMATCHED PROPERTIES OF EONN HDPE PIPES MECHANICAL PROPERTIES Long Term Resistance to Internal Pressure High Tensile Properties Good Flexural Properties High Impact Strength Excellent Flow Characteristics Light Weight & Flexibility THERMAL PROPERTIES Low Thermal Conductivity High Thermal Stability CHEMICAL PROPERTIES High Resistance to Chemical Attack High Environmental Stress Cracking Properties OTHER PROPERTIES High Abrasion Resistance Low Coefficient of Friction Resistant to Animal Life Low Flammability Physiological Harmless High Weather ability THE WINNING FEATURES OF THE ALL-ROUNDER EONN HDPE PIPES Excellent corrosion resistance and chemical resistance,resulting in a longer life Extremely light weight, hence easy to handle and transport. High abrasion resistance Earthquake resistance High UV resistance to scaling and biological build up Emergency connection possible High impact strength No exhilaration and infiltration, helps maintain the quality of fluid onveyed High flexibility combined with strength. Excellent water hammer characteristic helps, sustaining surges Shifting soils-no breakage Excellent flow characteristic leading to significant energy savings Smooth inner walls minimises frictional losses. Safe for potable water supply.

Mild Steel Pipe, Beam, Channel, Mild Steel Plate, Stainless Steel Pipe

Hdpe Duct, plb duct

Aluminum Pipes, cold rolled

water pipes, lighters, metal screw pipe, Grinder, holders, Agarbatti