Industrial Air Conditioning System Dealers in Sector 63, Noida

CHOICE OF SCREW COMPRESSOR of Hanbell (Taiwan), Bitzer (Germany) & J&E Hall (UK). All options are semi-hermetic in construction, thereby making it maintenance friendly. The screw compressor range offered is specifically developed for low temperature chillers applications and is offered along with adjustable volume ratio. Besides internally built oil separation system, check valves at suction and discharge port are provided as standard part of the OEM equipment. The screw compressor range offered is specifically designed by the respective OEMs for low temperature applications. HIGH COP/EER High cop/eer as an issue proficient gathering of the refrigerant. These water cooled chiller units are intended to meet the relevant necessities of ASHRAE/ANSI 15 Safety Code. Since the condensers are liberally oversized, productive gathering of the refrigerant prompts lower IKW contrasted and other accessible brands. SHELL & TUBE EVAPORATOR Shell & tube evaporator is constructed with copper containers of 19 SWG that empowers them to withstand hard water with PH more noteworthy than 8. The copper tubes contain Flamingo licensed star turbulator embeds that give turbulence to the refrigerant coursing through the copper tubes. As an issue of this turbulence these Shell & Tube evaporators have amazingly effective hotness exchange rate. The shell is produced from high-review steel. The evaporator is planned according to ASME Section VIII Div.1. AVAILABLE IN A CHOICE OF REFRIGERANTS Available in a choice of refrigerants R-22 (Freon), R-407c and R-134a. Both R-407c and R-134a are environment neighborly and non-ozone draining refrigerants. ULTRA EFFICIENT CONDENSING Ultra efficient condensing using outer finned copper tubes for increasing heat transfer surface results in higher efficiencyin comparison to copper tubes without finning. The copper tubes are of 16 SWG and are finned on the outer surface to accommodate up to 26 fins per inch. The copper tubes are mechanically expanded through a torque controlled machine on the tube sheets that are manufactured on imported VMC machine. ECONOMIZER FOR HIGHER EFFICIENCY Economizer for higher efficiency is provided as per refrigerant used and depending upon the liquid temperature range desired. Economiser is provided as standard part of supply in process chillers opted for evaporating temperature of 0 deg. C or lower. The economizer/sub-cooler enhances the overall capacity of the chiller by 10%, and reduces the power consumption, thereby increasing the overall Coefficient of Performance (COP). AVAILABLE IN A CHOICE OF REFRIGERANTS Available in a choice of refrigerants R-22 (Freon), R-407C and R-134a. Both R-407C and R-134A are environment friendly and non-ozone depleting refrigerants.   ADDITONAL AIR COOLED TYPE OIL COOLER Additonal air cooled type oil cooler is added depending upon the refrigerant used and the chilled water/brine temperature desired. The oil cooler helps maintain the oil temperatures flowing through the compressor within safe limits. The oil cooler fan is automatically controlled depending upon the oil temperature. This feature enhances the screw compressor life. LIQUID INJECTION Liquid injection is a standard gimmick and is utilized to cool the compressor engine slowing down. When the release temperature surpasses the ordinary range, an electric solenoid curl infuses fluid refrigerant to keep the slowing down inside protected breaking points. This peculiarity upgrades the life of the screw compressor. THERMOSTATIC EXPANSION VALVE Thermostatic expansion valve is given as an issue some piece of the water cooled screw chiller gear. Electronic extension valve can likewise be alternatively given. CONTROL PANEL Control panel with IP-65 assurance is given as standard piece of the water cooled supplies. MICROPROCESSOR BASED CONTROLLER Microprocessor based controller is a standard piece of the water cooled screw chiller supplies. The controller permits various set focuses that can be arranged to specific set of values that may be considered inside the safe working extent. If there should be an occurrence of any rupture in any of the set point esteem the controller will excursion the chiller after the fed wellbeing postponement period has passed and show it on the LCD show. Additionally, the controller naturally conforms the limit in a stepped configuration making them perfect for variable burden applications.

airconditioning plant accessories grill, diffusers, dampers etc. .

• Size: Standard
• Material: Metal
• Shape: Square
• Thickness: 5-10 mm
• Color: Grey
• Appearance: Modern
• Finishing: Polished

• Brand Name: Dry Cool
• Type: Fully Automatic
• Capacity: 3 liter - 30 liter
• No of Compressor: 1
• Flow Rate: 1 - 18 CMH

• Compressor: 125HP
• Pump: 10HP
• Blowers: 5x3 HP
• Lighting Loads: 10 Kw
• Sanctioned Load: 200K Wp
• P V Capacity: 150K Wp
• System: Hybrid Vfd Based (Grid Sync + Storage)
• Inverter: 140 kV A+10kV A
• Battery: 500V 700Ah
• Savings on diesel cos t in 1 Year: 20 Lakh
• Payback Period: 5-6 Y ear s

• Feature: Energy Savings/High Energy Efficiency
• Power: 115V/60Hz
• Finish: Galvanized Steel
• Bubbler Style: No Bubbler
• Chilling Option: 8 GPH

Remote water chillers convert standard drinking fountains into a water cooler.Fully enclosed for safe mounting anywhere. Ideal for permanently wired applications.

• Feature: Stable Performance
• Voltage: 220V
• Application: Industrial
• Automatic Grade: Automatic
• Power: 1-3kw
• Driven Type: Electric
• Brand Name: Autonics
• Series: TC3YF & TC3YT Series

Refrigeration temperature controller TC3YF series is high reliability temperature controller to protect the object inside the chillers via compressor output so that compressor operation cycle and ON ratio can be set even if errors occurs. This series also prevents loss of frozen efficiency with defrost function to remove frozen ice or frost in the freezer, and increases the efficiency of frozen through various delay time setting.

• Specialities: High performance, Reliable materials, Efficient working, High grade material, Low noise level, Safety against winding ,Tough body
• Material: Mild Steel
• Brand Name: Drycool
• Voltage: 415V
• Cooling Capacity (TR): 200 TR
• Phase: 3 Phase
• Country of Origin: Made in India
• Compressor Type: Screw

Suitable for bringing down the temperature of water / syrup below 4 c. This facilitates mixing and absorption of CO with water / syrup. It is available in two 2 models: Batch Type Incorporates insulated stainless steel holding tank connected to compressor. Water / syrup is by means of chilled gas running inside copper tubes in the tank. Available from 200 to 10,000 LPH capacities. Continuous Type This incorporates online chiller connected with PHE. The online chiller chills the glycol which in turn chills water / syrup in the PHE. Capacity: 500 - 5,000 ltr/hr.

• Country of Origin: Made in India
• Brand: DRYCOOL
• Compressor Type: SCROLL
• Power: 3 PHASE 
• Tonnage: 5 TON

Looking for premium quality Segregated Bus Ducts in India? Then you are at right place. Bamaa Group is a very popular name in the electrical goods and accessories market and we specialize in production and supply of advanced Segregated Bus Ducts. Designed by our expert team, these Segregated Bus Ducts have all stage conductors in the same cabinet or alternatively can also be provided with each conductor alienated by a grounded enclosure from near phases. The unique designs of Bamaa’s Segregated Bus ducts make them stand out and apart from other similar products on offer in the market. Furthermore, we also ensure that each Segregated Bus Duct produced by us meets internationally accepted quality and performance norms. In order to do so, we subject our Electrical Segregated Bus Duct to series of quality checks on different factors such as thermal effects, heating effects, voltage drop, electro dynamic force and so on. Premium quality and unique design of our product has helped us earn Kenya,Nigeria,Qatar,Zealand,Taiwan among the topmost Segregated Bus Ducts Manufacturers, suppliers and Exporters from India. FEATURES Low maintenance Highly power efficient Excellent durability Pocket friendly prices Ampacity studies Made from industrial grade materials Reliable operational efficiency WIDELY USED IN Electrical wiring Multiphase power plugs & sockets Building wiring Electric power transmission Industrial power plugs & sockets

• Application: Industrial Use
• Type: Hvac Duct
• Brand Name: Freshair Engineers
• Color: White
• Material: Stainless Steel
• Size: Customized

1) Cleanroom Architecture – Materials of construction and finishes are important in establishing cleanliness levels and minimizing the internal generation of contaminants from the surfaces. 2) Clean Room HVAC System – The integrity of the cleanroom environment is created by the pressure differential compared with adjacent areas through heating, ventilation and air-conditioning system. The HVAC system requirements include: Supplying airflow in sufficient volume and cleanliness to support the cleanliness rating of the room. Introducing air in a manner to prevent stagnant areas where particles could accumulate. Filtering the outside and re-circulated air across high efficiency particulate air (HEPA) filters. Conditioning the air to meet the cleanroom temperature and humidity requirements. Ensuring enough conditioned makeup air to maintain the specified positive pressurization. 3) Interaction Technology – Interaction technology includes two elements: (1) the movement of materials into the area and the movement of people and (2) maintenance and cleaning. Administrative instructions, procedures and actions are necessary to be made about the logistics, operation strategies, maintenance and cleaning. 4) Monitoring systems – Monitoring systems include a means of indicating that the cleanroom is functioning properly. The variables monitored are the pressure differential between the outside environment and the cleanroom, temperature, humidity and, in some cases, noise and vibrations. Control data should be recorded on a routine basis. HVAC SYSTEM DESIGN FOR CLEAN FACILITY HVAC systems in cleanrooms are substantially different from their counterparts in commercial buildings in terms of equipment design, system requirements, reliability, size and scale. A cleanroom differs from a normal comfort air conditioned space, in the following ways.   Increased Air Supply: Whereas comfort air conditioning would require about 2-10 air changes/hr, a typical cleanroom would typically require 20 – 60 air changes and could be as high as 600 for absolute cleanliness. The use of high efficiency filters: The use of high efficiency particulate air (HEPA) filters having filtration efficiency of 99.97% down to 0.3 microns is another distinguishing feature of cleanrooms. The HEPA filters for stringent cleanrooms are normally located at the terminal end and in most cases provide 100% ceiling coverage. Room pressurization: The cleanroom is positively pressurized (to 0.05 in-wc) with respect to the adjacent areas. This is done by supplying more air and extracting less air from the room than is supplied to it.   CHEMPHARM ENGINEERED SYSTEM INCLUDES ENERGY EFFICIENT KEY COMPONENT AS- Reciprocating/Screw/Scroll type Chiller Unit with VFD Controller. DX Unit/VRF unit Built-in PLC System for Low tonnage requirement. Hot Water Generator with Built-in PLC for Winter Heat/ Monsoon Reheat requirement. CHW/CDW pumps with VFD Drive to control the speed as per demand. Air Handler with centrifugal plug fan or DIDW Backward Curve fan has been select for controlled flow air based on the Flow & Static Pressure requirement of Varies application. Dehumidifier/ Humidifier System to Maintain the Inside RH/Tem all-round the Year. Heat recovery System to enhance the power saving. Thermal Filtration System with HEPA (H-13) or ULPA (H-14) filter where ever required as per Clean Room Classification. Factory built Square, Round or Oval Ducts having slip on or TDF type flanges based on the line / system  pressure and requirements – All ducts are built as per ASHRAE 2012 Duct construction Standard. Thermal Insulation are chosen based on Application & ambient condition but fibre free and as per ASTM standards – Standard specification / material are –Nitrile Rubber, XLPE , PU BASED , ROCK WOOL , MINERAL WOOL , GLASS etc 

SDTORK Flame Proof electric actuators are design to provide reliable and efficient operation of 90 degree quarter turn valves, dampers, etc.Actuator torques ranges from 80Nm to 3,000Nm, currently ten models are available: Compact type actuator, SD-HQ006, is also available separately.

Are you on the lookout for a company that provides HVAC Turnkey solutions? If your answer is an empathic yes, we are the right choice to opt for. We provide complete design and consultation in cleanroom mechanical systems. Our professionals are efficient enough to analyze, modify and retrofit existing cleanroom systems. They use modern techniques and tools in order to execute HVAC Turnkey Projects in an effective manner. Moreover, our experts complete HVAC Turnkey Projects in a time bound manner. One Air Handler can do the work of several motorized filter modules. Air Handlers not only pump cleanroom air, they also offer advanced climate control features not offered by fan filters. Optional capabilities such as air conditioning, humidifying and temperature control make air handling units better suited to precisely control your cleanroom environment. Whether you are building new, or upgrading to a cleaner climate, Air Handlers offer a wealth of performance benefits. Air Handler Features : Pull or produce room air through self-contained units Use a pre-filter to clean and a coil to condition the air Floor mounted outside the cleanroom saving valuable cleanroom floor space

Model - FD Series (HIGH STATIC PRESSURE DUCT TYPE) Ton -(5.8 – 20.8TR) Key features Superior air distribution for comfortable living. Air discharge orientation. Flexibility of air supply. Versatility Fresh air intake for healthy living. Model - FVG Series (FLOOR STANDING TYPE) TON - (4.2 – 16.7TR) Key features Enhanced varieties of factory modification and optional accessories. Quiet Operation. Direct air blow from indoor unit with plenum. Air blow via connected ducts. Easy operation. Design flexibility. Durability. Model - M5RT & M4RT (AIR COOLED ROOFTOP) TON -(7.8 – 20.6TR) Key features Package Unit. Base Beam. Flexible air supply utilising variable pitch pulley. Convertible Return and Supply Air. Scroll compressor. Power coated Condensate Drain pan. Slots For 2 Inches Return Air Filters. Higher Energy Efficiency Rating. Standard Handset.

Water Cooled Chiller, Cooling Towers, Air Cooled Heat Exchanger

Cold storage is something that withstands excess amount of cold and there are a lot of businesses that handle perishable amount of cold or temperature sensitive business. Cold storage warehouses are in trend now where the business owners will find time to store the products safely. Cold storage is not only about storing the product, it is the way of shipping too. If you are running a temperature sensitive business, then you might need a work place that is cold resistant. You should have a cold storage room in your company when your building the company. Ensure that the room will fit all the products you prefer. If you are just starting just a small cold storage will do your job. When your business is quite big, then comes the cold storage warehouses. When you need to store substantial number of products, these will help you grow and expand your business.

• Features: It is easly operated, good quality and design
• Application: Plastic Injection Moulding Machine
• Brand Name: PRECIMOULD
• Type: Air and Water cooled
• Power: 3W
• Automatic Grade: Automatic
• Phase: 3
• Cooling Capacity: Water and Air

ducted split air conditioners, Packaged Air Conditioner

Collar Damper

Long Distance Piping Packaged AC, distance education, Distance Estimator

• Brand Name: Ortem
• Fan Speed: 1350
• No Of Blades: 3 blades
• Sweep: 230mm
• Air Displacement: 65
• Input Power: 40Watts
• Packaging Type: Box

Condensers

AC Motor, Ac Drives, AUTOMATION SYSTEMS, Batteries, DC Drives, DC Motor

scroll chiller, water cooled scroll chiller, Air Receiver

Air Handling Units, AXIAL FAN, Cabinet Fans, inline fan, jet fan, Scrubbers

Cooling System, Material Handling Equipment, Food Processing Machinery