Air Dryers Dealers in Sector 59, Noida

• Inlet/Outlet connections: ½" BSP

Compressed air dryer are removed in water separator. The resultant compressed air becomes dry to pressure dew point equal to its reduced temperature (generally around+2°C to +8°C). As long as the temperature of compressed air, as it travels through the system does not fall below the dew point temperature produced in the dryer, no more water vapours will condense into troublesome liquid in downstream air lines.

The Heat of Compression (HOC) dryers are No-Purge Loss type desiccant dryers based on adsorption principle. The hot air from the Compressor at min 120 deg C and higher temp, is used directly for regeneration of the desiccant. After regeneration, this air is cooled down to 40 deg C and then it is dried in second tower. Thus, the use of heaters is eliminated. For eg. in the 6+6 Hrs. Cycle the hot air is fed for regeneration for 4 Hrs. and for balance 2 Hr. a changeover takes place where the air is first cooled in cooler, then dried and before going to the outlet, cools the regenerated desiccant bed, thus bringing it down to ambient temperature. This cycle is reversed for the next 4Hrs. where the Adsorber drying the air in the previous cycle goes for regeneration and vice versa.It’s having least running cost with best quality of air.   Salient Features: Having least running cost Best quality of air Lesser payback period Continuous duty with long efficient service life Easy to install and user friendly Capacity: 750 CFM to 6000 CFM Dew Point: -40 to -60°C ADP Purge Loss: NIL

We manufacture and export an extensive range of heatless type air dryers, which is a simplest form of dessicant type gas or air dryer (drier). These are use to achieving a dew point of -40?c or excellent for compressed air systems and other gas and air dryer (drier) applications. There is no increase in the effluent gas temperature and the desiccant beds remove oil in its vapor form.

• Material: Stainless steel
• Automation Grade: Automatic
• Voltage: 230 V
• Phase: Single
• Brand Name: PRECIMOULD
• Capacity: 25kg 50kg 75kg 100kg
• Design: Standard

Under the process division, we are supplying various types of industrial compressors such as reciprocating, centrifugal, sliding vane designs for air & gases application. Apart from being the sales representative for the principal companies that we represent, with network coverage in all metros, we have a well established team for service & spares that enable us give the client local support sought. We are also supplying industrial blowers & fans to meet all the requirements of various process industries. We are also able to take up jobs for Air separation plants, i.e. oxygen plants, Nitrogen plants etc. Working on cryogenic technology, PSA or VPSA methods. Our principal company is one of the major suppliers of Air separation plants in the world and have done a few jobs in India as well. We ensure desired purity at optimum project cost. Other products include AIR & GAS DRYRES & Accessories and AUTOMATIC SELF CLEANING FLUID STRAINERS, which are used for critical applications where the flow of the fluid cannot be stopped for cleaning of the filter element.

Refrigerator Air Dryer, oil free compressor, Screw Air Compressor

Air Dryers, psa nitrogen plants, low pressure dryers, gas dryers