Air Dryers Dealers in Sector 60, Noida

Our organization is engaged in offering a comprehensive range of heat reactivated type air dryers. These are extensively used when compressed air of very low dew point of (-) 60oc or (-) 80o deg c is required. Our range is designed in line with set industry standards, wherein the desiccant is regenerated at higher temperature, along with small quantity of dry air purge. Moreover, due to the purging with dry air and thermal regeneration, residual moisture loading on desiccant becomes very low. This helps to provides very low dew point as per the requirement. Salient features pressure is equalized to line pressure before changeover of drying vessels. This prevents pressure and flow surge, and, desiccant dusting a fully automatic unit requiring no attention of the operator heaters switch on/ off and all valves operate automatically low purge air requirement in comparison to heatless type dryer desiccant life is around 5 years counter current heated dry purge air provides maximum removal of moisture with minimum gas purge loss heaters are not in physical contact with the desiccant internal heaters provide maximum heat transfer efficiency resulting in lower power requirement standard units are designed to deliver dry gas / air of (-)40deg c dew point by using more purge airflow, and using molecular sieves, dew point of (-) 80deg c can be achieved specifications: air capacity 5 to 3000 nm3/ hr dew point (-) 40o c to (-) 80oc operating pressure 2 to 50 kg/ cm2g.

The heatless type dryer is designed to take advantage of the natural tendency to dessicant to established equilibrium with their surrounding and can deliver super dry compessed air. these type of dryers are the most economical and dew poins upto (-)40 °c are easily achieved. such dryers are mostly preffered for flow upto 500 cfm.Features: Excellent functionality High efficiency Superior performance Robust construction Specifications: Capacity: 20 CFM to 500 CFM Dew Point: -40 to -60 deg C ADP Purge Loss: 12-15 % Process: In this dryer two desiccant towers are used. While one tower is in drying, second tower undergoes regeneration simultaneously. Part of dry air coming out from tower in-line goes for regeneration of the second tower. Tower changeover takes place at every 5 minutes by a sequence controller mounted in control panel.

Hot air dryer at reduced temperature condense into water droplets and are removed in water separator. as it travels through the system does not fall below the dew point temperature produced in the dryer, no more water vapours will condense into troublesome liquid in downstream air lines.

• Material: Stainless steel
• Automation Grade: Automatic
• Voltage: 230 V
• Phase: Single
• Brand Name: PRECIMOULD
• Capacity: 25kg 50kg 75kg 100kg
• Design: Standard

psa nitrogen plants, gas dryers, co2 gas dryers, hydrogen gas dryers

Heatless Type Desiccant Dryers, oil free compressor, Sullair Air Compressors