Air Dryers Dealers in Noida

• Automation Grade: Semi-Automatic
• Dryer Type: Hopper Dryer
• Type: Hopper Dryer,Hopper Dryer
• Brand Name: Manglam
• Certification: ISO 9001:2008
• Weight: As Per Requirement
• Voltage: 220V
• Condition: New,New
• Usage: Plastic Industry
• Material: Metal,Metal
• Power Source: Electric,Electric
• Warranty: 1 Year
• Automatic: Semi Automatic,Automatic
• Phase: Single Phase
• Color: White,White etc., Grey
• Heating Media: Electric
• Finishing: Polished
• Air Heating Area: No
• Display Type: Digital
• Motor Power: As Per Requirement
• Hopper Capacity: As Per Requirement
• Packaging Type: Carton Box
• Specialities: Shear Strength, Precise Design, Precisely Designed
• Frequency: 40-50Hz, 50-60Hz,50-60Hz
• Country of Origin: India
• Category: Dehhumidifying & Drying
• MOQ: As per Client Requirement
• Automatic Grade: Automatic
• Driven Type: Electric
• Dryer Control: 0-100kg

The Heat of Compression (HOC) dryers are No-Purge Loss type desiccant dryers based on adsorption principle. The hot air from the Compressor at min 120 deg C and higher temp, is used directly for regeneration of the desiccant. After regeneration, this air is cooled down to 40 deg C and then it is dried in second tower. Thus, the use of heaters is eliminated. For eg. in the 6+6 Hrs. Cycle the hot air is fed for regeneration for 4 Hrs. and for balance 2 Hr. a changeover takes place where the air is first cooled in cooler, then dried and before going to the outlet, cools the regenerated desiccant bed, thus bringing it down to ambient temperature. This cycle is reversed for the next 4Hrs. where the Adsorber drying the air in the previous cycle goes for regeneration and vice versa.It’s having least running cost with best quality of air.   Salient Features: Having least running cost Best quality of air Lesser payback period Continuous duty with long efficient service life Easy to install and user friendly Capacity: 750 CFM to 6000 CFM Dew Point: -40 to -60°C ADP Purge Loss: NIL

• Material: MS
• Finishing: Polished
• Color: Blue
• Condition: New
• Power: 5kW
• Power Source: Electric
• Motor Power: 10HP, 50HP
• Automatic: Automatic
• Usage: Laboratory Industry

We manufacture high quality compressed air dryer that is developed from optimum quality base materials. Adopting latest technology and technical expertise, we have created finest heatless compressed air dryer that ensures high efficiency and durability. Moreover, it requires low maintenance. We are listed in the apex of most prominent refrigerated compressed air dryer exporters, based in india. Our compressed air dryer is available in both regular as well as irregular sizes. Some of the essential features of our dryer are robust construction, anti-corrosive, etc. The compressed air dryer is the simplest form of air dryer that can attain a dew point of -40â°c. Wet air passes through the chambers in upward direction through the desiccant. Drying of air takes place through absorption. Subsequently, dry air passes though chamber I to check valve assembly and to the after filter application area. In chamber ii, the desiccant is already wetted that is simultaneously regenerated. It is further depressurized in the atmosphere in downward direction through purge valve and needle valve. After the refrigeration is over, the purge is closed and the tower gradually repressurized to line pressure that initiates a smooth changeover. The 5 minutes of dying period render an efficacious dew point to -40â°c. For a perfect repressurization, approximate 60 seconds are required.

• Application: Industrial
• Flow Rate(LPM): 833 LPM
• Technology Used: PSA(Pressure Swing Adsorption)
• Purity Of Oxygen: 99+-3%
• Installation Time: 25-30 Days
• Brand: Gaztron
• Automation Grade: Fully-Automatic
• Design: Standard

Micro heat regenerated adsorption dryer works in a twin-tower alternative operation mode. Compressed air enters the dryer’s tower A through valve 1A (1B is closed), then is dehydrated and dried under the unique adsorption action of the adsorbent. Finished gas flows to the gas using point through valve 5A (5B is closed); meanwhile about 5% dry air source enters tower B through valve 4B (4A is closed) after being heated by the heater, the adsorbent in which is regenerated after a certain period of heating. Cold blowing begins when heating is stopped, which cools down the adsorption bed in the dryer’s tower B (for use in the next cycle). Finally, the air is discharged into the atmosphere through muffler. Before switching in the second half period, turn off valve 2B and open valve 1B to equalize the pressure in the two towers (to ensure pressure stability when using the gas and avoid the impact and jitter of the dryer), and the second half period work begins at the same time (the dryer’s tower B works and tower A regenerates). The process is similar to that of the previous half period. The process is similar to that of the previous half period. They save energy besides economising purge by reducing the loss of purge to a minimum of 50%. They have controllers with lucid functional displays that are programmable. They secure undisturbed operation despite tower changeovers. The moisture load is lessened by the auto drain valves in pre and oil filters. Therefore the desiccant life is secured without any extra cost. The inclusion of a unique purge economizer in the latest microprocessor based controller which facilitates manual setting up of the dryer load. This device can not only accept up to 3 compressor load/unload contacts but also compute the dryer load dynamically. According to these settings done, the purge can be set. Also, the purge air can be controlled according to the pressure input accepted by the controller.

• Features: Cost effective, Compact design, Low maintenance, Easy to install, Less power consumption, Increased desiccant life, In-built safety measures.
• USES: In cool towers

We offers a wide range of refrigerated air dryer which is used to remove moisture from compressed air by reducing the temperature. In this dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3°c is passed through the other side of the heat interchanger. At this temperature most of the moisture is condensed which is then separated and drained out in moisture separator.

We are engaged in offering best quality of Air-Water Chiller Plants as per clients requirements:

• Power Source: Electric
• Finishing: Polished
• Feature: Durable
• Use: Industrial
• Height: 580cm
• Surface: Polished

We are offering drying of plastics enhances quality of molding. Moisture content in plastics adversely affects the quality of molding. Excessive moisture in resins leads to products with unacceptable sturdiness, silver streaks and holes. Dryers serve to remove moisture from resins to prevent molding of such defective products. At times, the increase of temperature is used to enhance the plasticity during molding.

Heatless Air Dryer, Membrane Air Dryer, Energy Saving Design, Reduced Power Consumption, Robust in high temperature environments.

• Material: Stainless steel
• Automation Grade: Automatic
• Voltage: 230 V
• Phase: Single
• Brand Name: PRECIMOULD
• Capacity: 25kg 50kg 75kg 100kg
• Design: Standard

Under the process division, we are supplying various types of industrial compressors such as reciprocating, centrifugal, sliding vane designs for air & gases application. Apart from being the sales representative for the principal companies that we represent, with network coverage in all metros, we have a well established team for service & spares that enable us give the client local support sought. We are also supplying industrial blowers & fans to meet all the requirements of various process industries. We are also able to take up jobs for Air separation plants, i.e. oxygen plants, Nitrogen plants etc. Working on cryogenic technology, PSA or VPSA methods. Our principal company is one of the major suppliers of Air separation plants in the world and have done a few jobs in India as well. We ensure desired purity at optimum project cost. Other products include AIR & GAS DRYRES & Accessories and AUTOMATIC SELF CLEANING FLUID STRAINERS, which are used for critical applications where the flow of the fluid cannot be stopped for cleaning of the filter element.

• Rated flow capacity Nm3/hr (cfm) (1): 25(42.5)

Desiccant air dryers Heat exchangers maintain high degree of heat exchange efficiency and lower pressure drop through out life of dryer. Consistent degree of dryness over a wide range of flows and operating conditions.

• Features: High performance, Low power consumption
• Range: 500 to 5000 CFM
• Material: Stainless steel
• Dew point temperature: (-)70 deg C

• Max Temperature: 1500 Degree Celcius
• Phase: 3 Phase
• Voltage: 240 V
• Material: SS
• Capacity: 10000 L / Hr
• Automation Grade: Semi-Automatic

Adsorption dryers (Heatless) are designed with the consistent efforts of our professional team and the vast knowledge that they owe. These dryers’ works on a twin-tower alternative operation mode when the compressed air enters the dryer’s tower A through valve 1A. The air is then dehydrated and dried under the adsorption action of the adsorption use.

we are offering New hopper dryer from 25 kgs - 200 kgs