Bed Head Panel
Get Price Quote
Bed Head Panels offered by us are available in aluminum / mild steel powder coated with provision for gas outlets & electrical 5/15 amps switch sockets. As per the demand of the clients, our bed head panel is offered with nurse call cutout. Product Description: Bed Head Panel Sitc Aluminum Die Pressed Bed Head Panel Of 1.5mm Thick Sheet With Accessories (max. Length : Continuous ) Would Be Fabricated Of Aluminous Die Pressed 1.6 Mm Thick Imported Laminated Sheet In Such A Way To Provide 100% Safe And Efficient Means To Deliver All The Gases As Well As Electrical To The Patient/staff In Intensive Care Conditions. To Enclosed All Piping, Electrical Wires, Monitor Wire Etc. It Would Be Fitted Continuously Running On Wall The Design Of Modular Bhu Would Consist Of Aluminum Section To Meet The Requirement Of Htm 2002, Nfpa And Other International Standard. It Would Have Separate Duct For Medical Gases As Well As Electrical. There Would Be No Sharp Edges Having Smooth Finish And Without Any Visible Screws Etc. It Would Be Have Ability Fix Medical Gas Outlets, Electrical Sockets, Multi-channel Music System, Nurse’s Call Bell, Iv Fluid’s Saline And Space For Placement Of Monitors. It Would Also Have Color Code Around The Specific Gas Outlet And A Slide Rail For Focus Lamp. It Would Be Polyester Powder Coating Finish On All External Surfaces And Would Be Fitted With Wall With The Help Of 8mm Fasters At Specific Distance. With Accessories:- 1. I.v. Tree 2. Color Bill -1 Set 3. Electric Socket 5/16 Amp - 4 Provision For Accessories:- 1. Gas Outlet Oxygen -02 Nos 2. Gas Outlet Air -01 Nos 3. Gas Outlet -01 Nos
Hospital Bed Head Panel
1,250 Per Piece
10 Piece (MOQ)
Best Deals from Bed Head Panel
Bed Head Panel
790 - 970 Per Piece
1 Piece (MOQ)
Hospital Bed Head Panel
Get Price Quote
1 Piece (MOQ)
Wide assortment of Bed Head Panels, which are fabricated by using advanced and superior grade aluminum raw material are the most useful part of the ICU equipments for one point consol for Gas terminal and power sockets. The range of products are highly lauded for its hassle free performance. These panels are specially designed according to the Hospital Standards. The products are available in different length. These are powder coated as per the customer’s color choice. Lots of variety of modular design, size and shape for vertical or horizontal usage behind the patient bed to meet hospital standards. Key Features: Modular Design and Structure made up of extruded aluminum profile Sliding Components and Parts to access easy maintenance with front loading feature Hygienic surfaces, the surface adopt electrostatic powder coating with static dust Separate compartments to differentiate Gas outlets and Power sockets with aluminum barrier Flexible positioning of Gas terminal units and Electronic components Variety of integrated light options to choose from Length can be freely configured up to a maximum of 6 meters
Bed Headed Panel
Get Price Quote
1 Piece (MOQ)
Hospital Bed Head Panel
800 - 12,500 Per Piece
1 Piece (MOQ)
As the bed head panel manufacturer, Modular Healthcare System have been serving the medical industry for years by giving a tough competition to other healthcare systems providers.
Bed Head Panel
Get Price Quote
Suited for icu, iccu, itu, wards & cabins extruded aluminium body of 3 mm thickness powder coated and anodized to any colour of choice fitted gas outlet 1 no oxygen, 1 no vacuum & 1 no compressed air fitted with 6 nos 5a electrical socket & switch variable length optional iv stand optional railing optional trays for monitors optional incandescent light optional telephone jack.
Bed Head Panel
Get Price Quote
ICU Bed Head panels,Hospital bed head panels
Bed Head Panel
1,250 Per Piece
1 Piece (MOQ)
icu bed head panel
Get Price Quote
We are one of the well-recognized Manufacturers and Suppliers of ICU Bed Head Panel. Especially designed as per hospital standards, our ICU Bed Head Panel is accredited for high chemical resistance, ergonomic design, sturdy construction and long term functionality. Our ICU Bed Head Panel is available in different lengths and sizes to suit the requirements of the clients. Also, it is available in powder coated form as per clients color choice. Our ICU Bed Head Panel has an acrylic or poly base, technically called as Solid Surface. Our product name is Aquaris from Granaform, however, its market familiar name is Corian from Dupont. It resists bacterial growth as the material used for its making is non-porous. We offer our ICU Bed Head Panel after proper chemical and lab testing. Also, our ICU Bed Head Panel has high impact resistance owing to the unique design and robust construction. Our ICU Bed Head Panel can be incorporated with various items such as infusion pump / syringe pump stand, monitor stand, mmedicine/ disposable tray, IV stand, etc.
Bed Head Panel
15,000 - 32,000 Per Piece
5 Pieces (MOQ)
This is due to our cordial associations with the logistic companies that we are able to reach any preferred Jalandhar(India) with ease, thus meeting the delivery schedule. We are a focused towards bringing forth exceptional array of products that are quality tested from the initial stages of manufacturing. Our quality inspectors inspect each and every element of the raw material with complete proficiency
Hospital Bed Head Panel
Get Price Quote
Customers are our valued assets. For their genuine satisfaction we fabricate premium products with durability, quality and strength. We are a prominent Hospital Bed Head Panel Manufacturer and Supplier based in India. These Hospital Bed Head Panels are developed with cutting-edge technology and with the use of quality raw materials. We cater bulk requirements of Hospital Bed Head Panels as well. Salient Features Can be easily fitted to wallDurableCost-effectiveCorrosion-resistant
0.0
View Profile
bed head panels
Get Price Quote
0.0
View Profile
Aluminum Bed Head Panel without Rail
Get Price Quote
Aluminium Extruded horizontal bed head panel with provision for Gas Outlets & electrical switch / sockets.
0.0
View Profile
Medical Bed Head Panel
2,000 - 8,000 Per Feet
5 Piece(s) (MOQ)
0.0
View Profile
Hospital Bed Head Panel
950 Per Running Feet
Bed Head Panel
Get Price Quote
We offer a wide range of high tech Bed Head Panel that includes Vertical Bed Head Panel as well as horizontal bed head panel. Bed Head Panels offered by us are available in Aluminum / Mild Steel Powder coated with provision for Gas Outlets & Electrical 5/15 Amps switch sockets. As per the demand of the clients, our bed head panel is offered with Nurse Call cutout. We are counted among the distinguished Bed Head Panels Exporters and Suppliers based in India. Each Bed Head Panel Accommodates Two each of Oxygen & Vacuum Outlets Four multi- pins 5/15 Amps, Switch Sockets outlets combined Medi-rail Provision for Nurse Call Cutout Attributes Simple to operate Cutting-edge technology Easy to maintain Sturdy construction Precise components Demanded by Nursing Homes Hospitals Hospital Consultant companies Hospital Construction companies Hospital Architects
Lumipan H Bed Head Panel
Get Price Quote
Details Bed Head Units/Bed Head Panels are constructed from aluminum extrusion profiles with round and smooth shape corners and shall be in different sizes & length per each patient. The unit shall have three physically separated compartments [for low and extra low voltage, electrical services and for medical gas services]. The unit shall provide a safe, efficient means of delivering services to patients/staff in both general and special care applications. The unit shall have smooth curved surfaces, no visible screws. Installation of the unit shall be carried out easily by aluminium rail-brackets which allow simple horizontal and vertical alignment taking into account any wall high spots or unevenness. Removal of the covers for maintenance and pipeline connection shall be easy. The unit shall consist of a number of modular extrusions capable of being joined together to form a carcass to suit the particular application. The unit shall have a backspin which shall incorporate an area which is for medical gas pipelines. Segregation of services ie. Extra low voltage [<45 voltsi. low voltage [<5l]l] volts] and medical gases shall be maintained throughout. Medical Gas and Electrical services shall be separated by inside unit. Electric power feedings shall be ZZUV/5l]Hz. The middle compartment of the unit shall be used for medical gas outlets and electrical services but gas services and electric services shall be physically separated. Upper and lower compartments of the unit shall be used for reading through indirect lights and necessary electrical wirings. The lower cover of the unit shall have compartment for reading through light illumination. The upper cover of the unit shall have two openings for indirect light illumination through a transparent sheet. Both sides of the unit shall be closed by aluminum covers. All cables and terminal blocks used inside the unit shall be non—flammable type. The unit shall be manufactured in accordance with internationaland European standards, ISO m97 and EN 793 for "Medical Supply Units"to HTM Zlli 5 and 2l]ZZ and to latest edition of iEE and NEC regulations.The aluminum extrusion unit shall have an electrostatic powder paint finish on all external surfaces. Unit shall be supplied pre piped, pre wired and fully tested. The minimum mounting height of the unit should ideally be 48 inches i-4'] from the finished floor level. All removable covers of the unit shall be earthed.
0.0
View Profile
Medical Bed Head Panel
Get Price Quote
Supreme Medical Bed Head Panels are one of our most sought after products. They are renowned to be of the finest quality and are highly recommended by professionals. We have rated them leading market rates. We are wholesale retailers and deal in bulk and medium sized orders effortlessly. For further details, contact our sales executives who will guide you further.
0.0
View Profile
Bed Head Panel
Get Price Quote
Being a client centric organization, we manufacturer the Bed Head Panels as per their exact requirements.
Bed Head Panel
Get Price Quote
We are one of the trusted names of the industry engaged in offering genuine quality ICU Wards Bed Head Panel to the customers. These products are made available to the clients in varied specifications to meet the market demand efficiently. In addition to this, we ensure to timely deliver the ordered products at the clients' premises. Our product range includes ICU Wards Bed Head Panel, Vertical and Horizontal Bed Headed Panel.
Medical Bed Head Panel
Get Price Quote
We are appreciated as a reputed Manufacturer and Supplier of Medical Bed Head Panel based in Kerala, India. The Bed Head Panel we offer is fabricated using high-grade materials in adherence to set industrial parameters. To enhance customer satisfaction, we check the Medical Bed Head Panel on stringent quality standards. Customers can rely on us for delivering small or bulk orders of Medical Bed Head Panel within the postulated time.
0.0
View Profile
Bed Head Panel
1,750 - 2,850 Per Pieces
1 Feet (MOQ)
Medical bed head panels are used in the hospital wards and bear few essential equipment and outlets. These equipment and outlets are: Gas outlets – Through this, the essential life support gases like oxygen are supplied connected centrally. Power switches – Meant to connect machines and equipment for special purposes. Sockets & Other equipment. These can be two types: Horizontal bed head units Vertical bed head panels So, the medical bed head panel in India can have multiple utilities from serving as a life support system, a savior, treatment essential, or the nursing essential equipment. Considering it a crucial add-on to the ward Shreya Medical System manufactures bed head panels keeping a close eye on the minute details. Our panels have been designed uniquely based on world-class technology, and cutting-edge research and development programs. Shreya Medical System is the leading manufacturer and supplier of high-quality bed head panels in India. We deal with the finest products at affordable prices and have earned the trust of our clients which keeps us motivated and working hard. We take immense pride in always being recommended by our clients. The extra mile to make sure our customer’s satisfaction is not a big deal for Shreya Medical System.
Bed Head Panel
1,700 Per Piece
10 Meter (MOQ)
0.0
View Profile
MEX003 Bed Head Unit
Get Price Quote
0.0
View Profile
Bed Head Panel
Get Price Quote
The Bed head wall panel is Horizontally oriented surface mounted. Aluminum Panels are available in customer choice of length and color. Each Bed Head Panel is supplied with continuos double rail Optional accessories at additional cost is also available with the Panel:a) One Syringe Pump Pole with rail mount clamp.b) One Utility Basket with rail mount clamp.c) One Special Quality Monitor Tray and belts with rail mount clamp.d) One I.V. rod with rail mount clamp.e) One Note Pad ( Chart holder ) with rail mount clamp.
0.0
View Profile
Bed Head Panel
Get Price Quote
Bed Head Units shall be constructed from aluminium extrusion with round and smooth shape corners and shall be 180cm in length per each patient. The unit shall have three physically separated compartments (for low and extra low voltage electrical services and for medical gas services). The unit shall provide a safe, efficient means of delivering services to patients/staff in both general and special care applications. The unit shall have smooth curved surfaces, no visible screws. Installation of the unit shall be carried out easily by aluminium rail-brackets which allow simple horizontal and vertical alignment taking into account any wall high spots or unevenness. Removal of the covers for maintenance and pipeline connection shall be easily. The unit shall consist of a number of modular extrusion capable of being joined together to form a carcass to suit the particular application. The unit shall have a backspin which shall incorporate an area which is 95x22mm for medical gas pipes. Segregation of services ie. Extra low voltage (< 48 volts), low voltage (< 500 volts) and medical gases shall be maintained throughout. Medical Gas and Electrical services shall be separated by a separator inside unit. Electric power feedings shall be 220V/50Hz. The middle compartment of the unit shall be used for medical gas outlets and electrical services but gas services and electric services shall be physically separated. Upper and lower compartments of the unit shall be used for reading and indirect lights and necessary electrical wirings. The lower cover of the unit shall have a 60cm opening for 1x18W reading light illumination. The upper cover of the unit shall have two 60 cm openings for indirect light illumination. There shall be transparent glass which moulded from SAN material. Reflector sheet shall be used under reading and indirect light to enhance the illumination. Both sides of the unit shall be closed by aluminium covers. All cables and terminal block used inside unit shall be non- flammable type. Electronic start ballast shall be used for reading and indirect lights. The unit shall be manufactured in accordance with forth-coming international and European standards, ISO 11197 and EN 793 for “Medical Supply Units” to HTM 2015 and 2022 and to latest edition of IEE and NEC regulations. The aluminium extrusion unit shall have an electrostatic powder paint finish on all external surfaces. Unit shall be supplied pre-piped, pre-wired and fully tested. The minimum mounting height of the unit shall be 1.7 meters from the finished floor level. All removable covers of the unit shall be earthed. Electric power feedings shall be 220V/50Hz. The unit shall consist of following services for each patient, 1. 1 no of Oxygen outlet, ISO 9170:1990 and BS 5682:1992 compatible 2. 1 no of Medical Vacuum outlet, ISO 9170:1990 and BS 5682:1992 compatible 3. 2 no of double unswitched BS 13A standard electrical socket 4. 4 no of potential earthing node 5. 1 no of RJ11 telephone and RJ45 data socket 6. 1 no of 36 Watt fluorescent tube with electronic start ballast 7. 1 no of 18 Watt fluorescent tube with electronic start ballast 8. 1 no of Nurse call provision 9. 1 no of Two gang switch for reading and indirect light The standard range of Patient Bed Head Unit shall be “CE” marked under the Medical Devices Directive 93/42/EEC with approval body number. Under this directive, the specified products shall be classified as Class IIa Medical Devices.
0.0
View Profile
Bed Head Panel
Get Price Quote
0.0
View Profile
Bed Head Panel
Get Price Quote
0.0
View Profile
Bed Head Panel
Get Price Quote
0.0
View Profile
Post Free Ad
