Carbon Black Content Tester Dealers

• Power: 2-4 Hp
• Voltage: 220 V
• Display: Digital
• No of trays: 2.0
• No. Of Shelves: 2-3
• Temp. Range: 500 Degree C
• Frequency: 50 Hz

Customers should stay rest assured with us for the payment procedures. They can pay us conveniently through wide-ranging payment mediums. With the aid of modern packaging system and deft professionals, we can guarantee safe and secure deliveries of products. Also, we make sure that the material used for wrapping them is of premium quality.

The Carbon Black Content Tester has been designed incorporating many features and new ideas. The apparatus conforms to the most generally recognised National & International standards including BIS, IS, ASTM etc.To determine the average of carbon black content especially in polyethylene materials by pyrolysis method, like plastic pipes, films, sheets, cables, water tanks etc, this equipment is very much useful for evaluation of Carbon Black Content. Carbon Black is used in plastic as UV stabilizer to prevent degradation of plastic by UV radiation. It is also possible to find out ash content in plastic material by this instrument.

• Heating Load: 2 kW.
• Power: 230V AC, Single Phase.
• Accessories: Quartz Tube and Quartz boat.

To determine the % of Carbon Black (An UV Stabilizer) present in Polyethylene and Polypropylene compounds used for manufacturing of PE Pipes by “The Pyrolysis Process” used worldwide.

• Voltage: 220 V
• Capacity: 1 Kw
• Power Requirement: 230V AC, 50Hz, Single Phase
• Heating Load: 3 KW
• Required Time For Heating: 10 Minutes
• Required Time For Cooling: 20-30 Minutes

Features: Easy installation High in accuracy Portable Metal body Corrosion free Light weighted Rubber pipes attached Details : ESPM GS IEC IAS

We have different payment options to choose from as per the convenience of the clients. In the type of operation processed online, the procedure depends on the gateway or processor model; both of them ensure complete security. We are the most promising name when it comes to Carbon Black Content Tester.   APPLICATION : Carbon Black Content Tester is used to test percentage of carbon content in plastic material. This test method is used to determine the average carbon black content in materials like sheets, plastic pipes, films, cables, water tanks.  

We are instrumental in manufacturing and supplying carbon black content apparatus. Used for adding carbon black content in a right amount to plastic materials, the carbon black content apparatus is reliable and have a longer life. As carbon black is essential filler in plastic materials, our carbon black content apparatus acts as pigment and an uv absorber. Although the level of addition is determined by the plastic�s behavior but, the apparatus needs to be well controlled as well. Thus determining the percentage of carbon black content in given polymer mass. The method consists of pyrolysing the sample in an inert atmosphere and considering the gravimetric difference. construction particularly effective for polyolefin and polyethylene, these carbon black content apparatuses comes with compact furnace with double thermal insulation along with imported high temperature quartz glass. Additionally, the temperature is controlled by electronic solid state controller and built in rate-of-rise device to avoid practically any over scoots and better temperature stability.

• Power: 230V, 50Hz, single phase.
• Size of furnace: 6 inch X 6 inch X 6 inches
• The material of construction: Inner side Stainless Steel and outer side Mild Steel
• Temperature range: Ambient to 1150 °C
• Accessories: Glass U tube, Combustion tube, Combustion boat, Rotometer
• Paint: Powder coated.
• Features: Supplied with two separate glass flasks, Standards: ASTM D-1603 -14, IS 4984 and IS 2530

Presto Carbon Black Content Apparatus is commonly used for determining the Carbon Black content in polyethylene and polypropylene materials. The test is applicable only to samples where carbon is present in a free state. MODEL      CBC - 165 Presto Carbon Black Content Apparatus is commonly used for determining the Carbon Black content in polyethylene and polypropylene materials. The test is applicable only to samples where carbon is present in a free state. According to standards, the Carbon Black content in the specimens is calculated by measuring the difference in the weight of the rest sample before and after treatment in the apparatus. The Presto Carbon Black Content Apparatus is designed as per ASTM D-1603 -14, IS 4984 and IS 2530 standards to determine carbon black content of plastics. Presto Carbon Black Content Apparatus consists of tubular furnace fabricated using mild steel. The relatively low operating wattage of the heater ensures that the furnace is long lasting. It is fitted with an imported programmable P.I.D. controller to effectively control the temperature. The Presto Carbon Black Content Apparatus is equipped with a nitrogen flow meter and a full set of glass parts. Further there are two separate flasks to hold solid ice and the main combustion tube supplied with the apparatus are specially made of Quartz glass. Quartz glass can withstand much higher temperature as compared to hardened glass (borosil).

• Power: 230 V 50Hz, single phase.
• Size of furnace: 10 inch x 8 inch x 8 inch.
• Material of construction: M.S.
• Temperature range: Ambient to 1150 ºC
• Paint: Powder coated.

Accessories : Desiccator, Glass U tube, Combustion tube, Combustion boat, Rotometer,Rubber tube [1 no. each], Glass end caps – 2 nos. and Glass traps – 3 nos.

• Power: 1.5 KW.
• Furnace size: 10 x 8 x 8 inch
• Temperature Range: Ambient to 1000 °C.
• Resolution: 1 °C. Accuracy: ± 2 °C
• Supply: 230 VACS/ 50 Hz
• Paint: Powder coated

Temperature control system : Microcontroller based PID controller. Accessories : Desiccator, Glass U tube, Combustion tube, Combust Rotometer, Rubber tube [1 no. each], Glass end Caps – 2 nos. and Glass traps – 3 nos. Special Feature : Compact with safe assembly for glassware's.

• Temperature: 800°c

This Instrument is in according to ASTM BS, DIN,ISO, IS (Indian Standard) or according to customer’s required specification, PID based temperature controller with auto-tune facility Temperature resolution 1°c with accuracy better than ±5°c, Test structure with furnace and tubing fixed and clearly allocated.

Surya Carbon Black Content Tester is used to determine the average carbon black content in materials like plastic pipes, films, sheets, cables, water tanks.

• Power: Thermal
• Usage: Plastic Testing Machine
• Brand Name: SSI
• Place of Origin: Delhi, India

CARBON BLACK CONTENT TESTER is widely used in plastic industry to check percentage of Carbon in Plastic material or finished products. Under the strict supervision of our well experienced Engineers Kant Plastology offers the innovative collection of CARBON BLACK CONTENT TESTER with adequate design of heater-thermocouple assembly and very smooth rise of heat with highly precise temperature control.The offered apparatus has minimum heat loss due to extra coating of heat insulation and its electrical components has also long life because its fitted at the bottom side of furnace.Our company procures all test related glassware accessories and chemicals to conduct the test with apparatus.

• Temperature: 800º C
• Power: 220/230 V AC, 50 Hz Single Phase.

carbon black content tester has been designed incorporating many features and new ideas. The apparatus conforms to the most recognized national and international standards including BIS, ISO, ASTM, etc. To determine the average of carbon black content especially in polyethylene materials by pyrolysis method, like plastic pipes, films, sheets, cables, water tanks etc., this equipment is very useful for evaluation of carbon black content. Carbon black is used in plastic as a UV stabilizer to prevent degradation of plastic by UV radiation. It is also possible to find out ash content in plastic material by this instrument.

• Model No.: K-CBC-01
• Temperature Range: Ambient to 800°C
• Timer Range: Up to 999.9 Seconds / Minutes

CARBON BLACK CONTENT TESTER is widely used in plastic industry to check percentage of Carbon in Plastic material or finished products. Under the strict supervision of our well experienced Engineers Kant Plastology offers the innovative collection of CARBON BLACK CONTENT TESTER with adequate design of heater-thermocouple assembly and very smooth rise of heat with highly precise temperature control.The offered apparatus has minimum heat loss due to extra coating of heat insulation and its electrical components has also long life because its fitted at the bottom side of furnace.Our company procures all test related glassware accessories and chemicals to conduct the test with apparatus.

The carbon black content apparatus is equipped with a horizontal furnace which is constructed using mild steel material. The range of the furnace to heat it can be set maximum up to 115oC. It is a law watt of heater that implicates the long life and durability of the furnace. Also, it is designed with a PID controller that helps to set the temperature up to +-5oC. It is incorporated in a nitrogen flow meter along with the glass parts. Apart from this, two flasks can hold the solid ice firmly. The testing machine is provided to the customers with the combustion tubes and boats that are made up of quartz glass. The quality of this glass is far better than the borosil glass that can easily bear high temperatures. The device is also provided with some additional accessories such as Combustion boat, Rotometer, Glass traps – 3 nos., Combustion tube, Desiccator, Glass U Tube, Glass end caps 2 nos. that make the working of the apparatus easy.