Cliff Scaffoldings (p) Ltd. Sector 81, Noida, Uttar Pradesh

Cliff are suppliers of wooden boards that is from sources certified manufacturers in Austria, Sweden and New Zealand Stocks sizes are 3.9m, 3.0m and 2.0m, but other sizes are available to order. BANDED AT BOTH ENDS WITH GI BANDS Standards as per BS 2482

We are manufacture and offer a wide variety of wing nuts that is made of qualitative raw material. The entire range has been appreciated for their durability, corrosion resistance and other features. Available in standardized dimensions, the range can also be altered to meet the specific requirement of the clients. Wing nuts are generally considered by most to be a weaker type of nut, but this is not necessarily the case. The wing shaped protrusions are thought to be easy to break off, and the extra size makes them more vulnerable to corrosion. This is why you will find that most wing nuts have a hex head on them just like a normal nut. This is just in case the wings break off and the nut needs to be removed or tightened with a wrench. 

We provide Water Stopper that are available in standardized dimensions, the range can also be altered to meet the specific requirement of the clients. water stopper is compatible with 17mm tie rods, for achieving water tight ties .Water stoppers are made from high quality casting and have a plastic caps at both ends, special feature is an additional surrounding disc for better Anchoring and further security against penetrating water. SIE water stoppers are optimal choice for contractors. 

The Cliff work system consists of all steel economy panels. These are available in a combination of sizes from 75mm to 600mm wide and 900mm to 3000mm long. Special sizes can also be made to order.  The panels are joined by wedge sets which are inserted through slots in the punched flat which forms the edge of the panel.  The panels are aligned by either tube or channel walers which are clamped to the panels with "B" or "C" clamps.  For heavyduty concrete work soldiers are used. The panels are then gangformed and crane handled.  The panels are tied together to form parallel faces using UniSpan's proprietary tie systems.

Our company offers universal jack . These universal jack are manufactured from optimum quality, which makes them durable with high efficiency. These universal jack are efficient in lifting heavy weights. The universal jack are available in various specifications at most competitive prices.The universal jack provides a method of adjustment which can be used at either the top or bottom of a scaffold support structure. It is used in conjuction with forkeads and adaptors and can accept the full loading capacity of cuplock when fully braced. These universal jack can be supplied with welded base plate as adjustable jack.

we manufacture a wide array of universal clamp that is made of sheet metal and chrome plated. Its spring controlled jaws cork can accept 12 to 50 mm diameter articles and is fitted with 15 cm. long mild steel rod. This universal clamp is used in the chemistry labs and helps in meeting exact test results. This universal clamp has specially formed gripping faces and adapted to hold lapping rods. This universal clamp comes with lapping sticks of various diameters. Its spring controlled jaws cork lined which can accept 12 to 50 mm dia, articles, with brass wing nut, fitted with 15 cm. Long mild steel rod.   supported by our team of personnel, we manufacture universal clamps. These are suitable for soft fit and form work applications. Our clamps are made by making use of sheet metal with boron steel bolt and are zinc plated. Our clamps have the attributes such accurate dimension and sturdy construction.

Type : Universal

Material : Metal

Application : Industrial

Color : Grey

Finishing : Polished

Feature : Durable, Easy To Fit, Rust Resistant

U-Heads are designed to be used in conjunction with Adjustable System Scaffolding. The main function of a U-Head is to hold timber beams in securely in place.The U -Heads Jack offered by us are of superior quality standards and these have a pure zinc plated finish thus adding shine to it. These are adjustable and thus is the biggest advantage of these products. These are made under the deep scrutiny of experts thus assure superior performance.

We are professional manufacturer and exporter of all scaffolding fittings and accessories. We also supply other products such as ledger, bottom cup, ladder and so on, with current production capacity about 400 containers per year. Currently we have over 400 employees, with over 20,000 square meters land, workshops and offices building accounting about 8,000 square meters. We are dedicated to offering an unprecedented level of quality to all our customers and have built our reputation on quality and services.

The tie rod we manufacture gets heavily utilized in hydraulic press, power press, injection moulding machine and many more. Our tie rod is made to carry tensile loads for its capacity. The highly capable tie rods are made strong enough to bear the rigors of daily driving. While driving, the car will require a heavy duty tie rod to effectively lend support to the car’s under chassis. Tie rods allow a variety of applications in formwork tie systems. They have a cut threading and are available in 6 Mtrs. length or as per length required. Tie rods have been developed for reinforced concrete and tying applications, Offering an economical solution where threaded joints or couplers are required. Tie rods arc threaded along their entire length, to allow the bear to be cut to the Required length on site, as necessary.Tie thread form is a cut right-hand thread with a coarse pitch that is robust and which allows easy assembly. 

Scaffold Steel Boards — 38mm x 225mm, graded to a 1.2m maximum support centre (670kg per m²). Selected european white-wood. BSI Kitemarked. BS 2482:2009 All Steel boards fitted each end with galvanised hooping irons that are pressed in at the end and nailed round the side. Preservative treatment option (BS8417:2003). Fire retardant treatment option. Scaffold Steel Boards   — These are manufactured as per customer Specification and Sizes.Commonly Steel board sizes are below:- 225 MM X 62 MM X THICKNESS225 MM X 44 MM X THICKNESS225 MM X 38 MM X THICKNESS 240 MM X 42 MM X THICKNESS240 MM X 45 MM X THICKNESS 250 MM X MM X THICKNESS250 MM X 45 MM X THICKNESS 210 MM X 45 MM X THICKNESS250 MM X 42 MM X THICKNESS Thickness:   Varies as per customer requirements:   1.2mm / 1.5mm /1.8mm 2.0mm /2.5mm) Lengths: Normally produced Lengths are: 4 MTR/ 3 MTR / 2.50 MTR / 2.0M MTR / 1.20 MTR. However, we can produce special other lengths also as per customer requirements. Finish of Steel boards available are: Made from Pre galvanized Sheet Or Made from Black sheet and then Painted

The SPAN Decking System is designed to support a variety of bay sizes with a maximum load of 40 kN on any supporting leg . For maximum economy, the rapid strike drophead offers the facility for early striking of the decking system. When the support plate on the drophead remains in position to support the slab, the decking beam can be dismantled and reassembled elsewhere to enable greater utilization of the equipment. This Decking system is ideally suited for construction of reinforced concrete suspended slabs, with plywood shuttering, and incorporates the benefits of early striking. Large grid sizes of up to 2.5 x 1.8 m ensures speedy erection and different sizes of primary and secondary beams can give a range of twelve support modules. Notching of plywood over the dropheads is eliminated, and standard sizes of plywood can be used. 

Props Provide the Ideal and the most economic method of support for all kinds of formwork, slabs, beams, wall & Columns. They are also invaluable for a wide variety of applications in general building construction and repair work. Props eliminate the costly labour and time consumed in cutting timber to length, wedging and nailing when used in the vertical as a prop which is made as per heavy & light duty.Props are the compression members used as temporary supports for building and civil engineering works incorporating a means for adjusting and fixing their length.

We have a large scale unit engaged in manufacturing and exporting black pipestubes and galvanized Steel tubespipes. We manufacture black tubes for a range of applications like Mild Steel tubes for structural purpose and mechanical & general engineering purpose, ERW Pipes for Scaffolding mainly but also made for other application use like water, gas & sewerage, Steel tubes for idlers of belt conveyors, water wells and Lancing Pipes for various automotive & industrial applications.

We are engaged in offering Scaffold Boards. They provide adequate safety and are long-lasting. Pressed type made of HR sheet and Jally type made of Square Tube.

Thickness : 1.2mm / 1.5mm /1.8mm 2.0mm

we offer our clients Roofing Coupler which is precision engineered and manufactured using latest technology. These are designed for Hole-Free rapid clamping of scaffold tube above and below the corrugated sheeting. Our Roofing Couplers are available in different sizes and shapes depending on the requirement of our clients.

Size : 48.3mm

Rapid /wedge clamps are used with mild steel rods and provide a cheap, effective clamping system that has no nuts or bolts and leaves no expensive ties in the concrete. Available in blue painted, galvanized or rough finish. The wedge of the clamp is available with heat treatment also for long life.  

Connects putlog or transom tubes to ledger tubes for the support of scaffold boards. The one piece body has been carefully designed and press-formed to provide the maximum resistance to movement and a long working life. It is not required to be a load bearing coupler.

Weight : 0.77kg

Size : 48.3 mm

Our Prop nuts are made up of good quality as per customers requirement. These are available in various sizes and specifications. These are widely appreciated by our customers for its durability and quality. We provide the best possible engineering and manufacturing platform for current and new designs with high quality, quick response time and competitive prices. The Prop nuts are made in our very high precision foundry attached to a CNC Tool Room for making high accuracy tooling requirements.

Props Provide the Ideal and the most economic method of support for all kinds of formwork, slabs, beams, wall & Columns. They are also invaluable for a wide variety of applications in general building construction and repair work. Props eliminate the costly labour and time consumed in cutting timber to length, wedging and nailing when used in the vertical as a prop which is made as per heavy & light duty. Props are the compression members used as temporary supports for building and civil engineering works incorporating a means for adjusting and fixing their length. Props are designed to provided a simple & cost effective method to shore and re-shore. Props are used in all types of construction work to withstand vertical loads or acts as wall brace wherever adjustable load bearing members are required.   Sizes: Various Sizes as per customer requirement and specification Finish of Props available are: Galvanized Painted

The Prop Nuts Heavy are made up of good quality as per customers requirement. These are available in various sizes and specifications. We are one of the leading manufacturers and suppliers of Adjustable telescopic prop nuts. Our range of Industrial Telescopic Prop successfully caters specific needs and requirements of customers. These Adjustable Telescopic Spans are made from the finest raw materials to ensure total quality and complete satisfaction of customers. It has a unique design to give exceptionally high load bearing capacity for its low weight. 

We facilitate our clients with Swivel Copper Pressed, which is available in various specifications. Proper use of raw material in manufacturing process has made this product durable and robust. These are fine in finish, corrosion resistant and are designed as per prevailing quality standards. Keeping in mind the budgetary constraints of clients, we offer our range at competitive price.

Size : 48.3 mm

Sleeve Couplers join two scaffold tubes externally end to end. A steel divider located centrally ensures equal insertion of each tube. They can be employed where tension joints are required and therefore are particularly useful for long bracing and ledger tubes. Our expertise lies in offering our client Sleeve Couplers which are available in various specifications to cater to diverse requirements of our clients. We manufacture our Sleeve Coupler with quality sheet metal and these are widely applicable for external connection of tubes. Further, these are appreciated as they provide a secure joint between the tubes.

we offer our clients Roofing Coupler which is precision engineered and manufactured using latest technology. These are designed for Hole-Free rapid clamping of scaffold tube above and below the corrugated sheeting. Our Roofing Couplers are available in different sizes and shapes depending on the requirement of our clients. Designed for 'hole-free' rapid clamping of scaffold tube above and below corrugated sheeting.

Size : 48.3mm

Connects putlog or transom tubes to ledger tubes for the support of scaffold boards. The one piece body has been carefully designed and press-formed to provide the maximum resistance to movement and a long working life. It is not required to be a load bearing coupler. For rapid erection or dismantling of putlogs and transoms. featuring a special one piece "wrap-over".weight: 0.77kg Maximum safe working loads to BS5973. Slip along tube: 0.53kN

Size : 48.3 mm