Compressed Air Dryer Dealers in Sector 59, Noida

• Rated flow capacity Nm3/hr (cfm) (1): 25(42.5)

Desiccant air dryers Heat exchangers maintain high degree of heat exchange efficiency and lower pressure drop through out life of dryer. Consistent degree of dryness over a wide range of flows and operating conditions.

The Heat of Compression (HOC) dryers are No-Purge Loss type desiccant dryers based on adsorption principle. The hot air from the Compressor at min 120 deg C and higher temp, is used directly for regeneration of the desiccant. After regeneration, this air is cooled down to 40 deg C and then it is dried in second tower. Thus, the use of heaters is eliminated. For eg. in the 6+6 Hrs. Cycle the hot air is fed for regeneration for 4 Hrs. and for balance 2 Hr. a changeover takes place where the air is first cooled in cooler, then dried and before going to the outlet, cools the regenerated desiccant bed, thus bringing it down to ambient temperature. This cycle is reversed for the next 4Hrs. where the Adsorber drying the air in the previous cycle goes for regeneration and vice versa.It’s having least running cost with best quality of air.   Salient Features: Having least running cost Best quality of air Lesser payback period Continuous duty with long efficient service life Easy to install and user friendly Capacity: 750 CFM to 6000 CFM Dew Point: -40 to -60°C ADP Purge Loss: NIL

We are offering refrigerated air dryer. The basic principle is the removal of moisture by cooling air to certain present temperature. The concept of efficient cooling is removal of heat only. The air first enters into the precooler where the incoming hot air is being cooled by outgoing cold air so as to reduce the heat load of evaporator . The air from precooler enter into the evaporator where further heat is removed by boiling refrigerant like freon. Now the air get condensed and this moist air is passed through a moisture separator where moisture is drained out by centrifugal action of air. The moist free air enters into precooler to cool the incoming air. Salient features: simple and compact design. Automatic cleaning of condenser. Efficient power saving. Least pressure drop. Easy maintenance. Specification: range : 5 to 1000 nm3/hr pressure : 0. 5 to 12. 5 barg. Electrical connection: 415v , 3phase , 50 hz refrigerant: r22 dew point : (-)23.

Heatless Type Desiccant Dryers, oil free compressor, Screw Air Compressor