Conveyor Systems Dealers in Noida

We are offering belt conveyor systems continuously transport bulk materials, excavated and crushed rock material in a clean and efficient manner over long distances, through curves and up and down via considerable inclinations. The design parameters strongly determined the climatic conditions and material properties. Hse belt conveyors can be stationary, shift able, enclosed, running in tunnels over long distances, mounted on sleepers, on rails and onto the tunnel roof. The belt width ranges from 1 m to 3 m, the maximum belt speed today reaches 6,1 m s in copper mines (even 10 m s on conveyor bridges).

• Brand Name: Conveyor Belt

Owing to the rich experience in this field, we have been able to offer our customers conveyor belt to our prestigious customers. The offered conveyor belts are widely used for conveying various materials from one place to another in industrial application. Manufactured in compliance with the international standards, the offered belts are known for their functional capacity, efficiency, and durability.

• Brand Name: SZWIT
• Loading Type: Automatic
• Country of Origin: Taiwan

Product Description Functions:The conveyor can be used as automatic connection line among equipment sets in SMT and AI production lines to save labor cost and connect front and following part of equipment setsFeatures: Independent electric box, modular control system, simple and beautiful wiring layout; Independently development by SZWIT with an integrated control board with stable performance; Board in and out control by the front and rear photoelectric sensors cooperate, The connection between the adjacent equipment in the SMT production line has the function of transmission and pause The transmission mode is double stepping motor, stepless variable speed, low voltage work is safer Double precision ball screws to adjust the width, Ensure the accuracy of width adjustment Hardened chrome-plated rods, widened guide rails and extended linear bearings, more stable in wear resistance One-touch operating to switch flow direction, double flow direction can be switched easily With SMEMA standard four-core signa cable which can be directly connected to other equipment. Specification: Model 0.5m (Single rail) 1m (Dual-rails) Supply voltage Single-phase AC220V/50-60HZ PCB width size(mm) 50~350mm Transmission height 900±30mm Overall Dimension L500×W1150×H905mm L1000×W1150×H905mm PCB Transport direction L~R (R~L One-key switch flow direction) Transport speed 1-12m/min(Adjustable)

• Type: Flexible Conveyors
• Application: Packaging
• Capacity: 200 To 300 (kg/feet)
• Brand Name: Shiv Technology
• Driven Type: Electric
• Material: Aluminium & MS
• Belt Material: PVC & other
• Structure: Customized
• Height Of Conveyor: As per Customer Required
• Belt Width: As per Customer Required
• Operating Speed: Adjsuatble
• Design: Standard
• Is It Customised: Yes
• Speed Adjustable: Yes
• I Deal In: New Only
• Adjustable Speed: Yes
• Minimum Order Quantity: 1 Unit

For feeding, inspection, preparation and cutting of fresh fruits or vegetables. Available from 1 to 10 MT/hr feed capacities and in one to three tier models having 6 to 24 work stations.

we are offering Conveyor. Role of Conveyors. Provides a stable conveyance of materials automatically that supports the management of material conveyance and drying. In addition, the reduction of manual feeding ensures greater safety.

We are offering We devote major time in Exporting, Manufacturing and Supplying an assortment of Belt Conveyors in Greater Noida, Uttar Pradesh, India that are acknowledged among customers. These collection are produced using best grade raw materials and advanced technology to be sure its long lasting activities and durability. Reachable at business sector essential expenses, we offer these Belt Conveyors at market minimal selling price ranges. www.systira.com

• Material: Mild Steel
• Brand Name: Samtek Machinery
• Voltage: 220-240 V
• Phase: 3 Phase
• Capacity: 50 kg per feet
• Length: 10 feet
• Automation Grade: Automatic
• Power Source: Electric
• Frequency: 50-60 Hz
• Surface Finish: Polished
• Motor Power: 5 HP
• Warranty: 1 Year

This machine has a automatic conveyor. Battery is placed on the conveyor. Width of Battery, need not to be set. It can accommodate Battery up to Max. Width of 305mm. Most of Batteries are less than this. This machine has three Blades for Cutting. Cutting heights of all the three blades can be set at independent heights by turning Rotary wheel. This wheel is visible in picture of machine. Scale is provided to set the height of cutting from bottom. Conveyor takes the Battery into machine for cutting. First Cutting is set above lid so any battery which has more height than normal automotive batteries like Standby Batteries i.e. IT-500, Jumbo etc. will be cut and that portion ejects out from first window. Second cutting is set normally at sealing line of automotive battery lid and third cutting is set below strap.During Cutting of Battery dust is confined inside of covers because cutter is enclosed. Max. Of Automotive Batteries have approximately same height, say +-10 mm. Cut Lid ejected out of first window and Strap portion of battery ejects out form second window. Remaining Battery will come out of machine on Conveyor. Machine can be provided with wheels so machine is used to unload battery at the same time cutting is performed.This saves exposure of workman from Lead Dust; increases efficiency of organization reduces lead time as well as increases liquidity of Funds. Plastic Containers can be sent for immediate disposal/recycling facility. Lead Dust is confined inside enclosure at the same time water jets are provided by pre-fitted Pump. Water is collected in the bottom tank. This helps to separate Plastic Dust from Lead dust. Plastic dust floats and lead dust is precipitated at the bottom. Hence it becomes environmentally Sound Method to cut the Battery for further separation. Remember this Cut Battery can directly go to another attachment; we call it Acid Draining Attachment. Details of this attachment are mentioned below.   This machine is suitable for normal quantity of Batteries or by small smelter with normal budget. Power required: 415V 3 phase, 12 Kw approx. Belt made of : Nylon

• Voltage: 220-240 V
• Phase: 3 Phase
• Country of Origin: Made in India
• Brand Name: SFM
• Material: Stainless Steel
• Power Source: Electric
• Capacity: 50 kg per feet
• Automation Grade: Automatic
• Length: 10 ft
• Frequency: 50-60 Hz
• Motor Power: 2 HP

The Aero mechanical conveyer is a tubular design in which a wire rope assembly with accurately spaced polyurethane discs move at high speed. At each end of the conveyer, the rope assembly runs in the specially designed sprockets. The drive assembly can be located in either the top or bottom positions of the conveyer, depending on length, or to suit requirements. The action of the rope assembly travelling at high speed, sets up to an airstream running at the same velocity. As material is fed into the airstream, it is fluidized and conveyed to the outlet where it is centrifugally ejected. High capacities can be achieved with low energy requirement and minimum product degradation and separation. One of the most significant features of the Aero mechanical conveying system is its ability to convey materials at any angle 0 to 90 degree without loss of capacity. The range of operating configurations is virtually limitless- enabling the widest choice of system layout options using standard components and available factory environment.

• Brand Name: Authentic
• Payment Mode Term: T/T(Bank Transfer)
• Motor: Bonvario/Rotomotive
• Shipping: Road/Air/Sea
• Packing Detail: Strong wooden Packing
• MOC: S.S. 304/M.S. Body Powder coated

Belt Width : 300mm                                        Conveyor width 350mm Conveyor Length: 1200mm Height of conveyor : 800+/- 50mm Belt material & shade: Top PVC, bottom Nylon, Matt finish Black 2 mm thick Gear Box: Bonvario Fix Speed With Starter (Make BCH) MS Painted/ Powder coated structure Heavy Duty Structure Side Guide for alignment of product. Variable Frequency Drive (for Variable Speed) Extra     

• Brand Name: S.G. Packaging
• Driven Type: Electric
• Capacity (kg per feet): 50 to 100 kg per feet
• Length: 10-20 feet
• Material: Stainless Steel

• Condition: New
• Material: Stainless Steel
• Voltage: 220 V
• Capacity : 50 to 100 kg per feet
• Length: 10-20 feet
• Automation Grade: Automatic
• Temperature Resistant: Yes
• Is It Corrosion Resistant: Corrosion Resistant

• Belt Material: Aluminium
• Condition: New
• Voltage: NA
• Feature: Heat Resistant
• After-Sales Service Provided: Engineers available to service machinery overseas
• Type: Bucket Conveyor
• Horizontal Belt Conveyar: Belt Conveyor
• Dimension(L*W*H): NA
• Structure: Belt Conveyor
• Lead Time: 25 Days
• Port: TPD/YJK/Patli/Sonipat/Mundra
• Packaging Details: We pack our machines in wooden boxes. Delivery should done in 30 days.
• Power(W): NA

• Width of Conveyor Belts: 200-400 mm (Depends upon weight & materials)
• Length of conveyor: Depends upon material dropping height.
• Model: Infeed belt conveyor (Model: EE-IC-Belt) Infeed bucket conveyor (Model: EE-IC-Bucket) Infeed Z conveyor (Model: EE-IC-Z)
• Power requirement: 220 / 440 VAC, 50 Hz. 1 kW.
• Feeder: A vibrator is used for feeding material.
•  :  

Infeed Belt Conveyor With Big Hopper (Model : EE-IC)Infeed belts conveyor is used to feed materials in upper hopper of filling machines. It is suitable for Sugar, Rice, Tea, Pulses, Snacks, Seeds, Namkeens, Dry Fruits, Grains and Granules. There are three types of conveyor are available according to product to be feed.     Belt with both side walls & 2’ high cleats in EE-IC-Belt. Buckets are mounted on conveyor belt in EE-IC-Bucket.   Automatic material controlling in upper hopper of filling machine.

• Material: PTFE
• Application: Chemical Industry,Airspace Industry,Metallurgical Industry,Petroleum Industry
• Operating Temperature Range: -170 to +260 deg C
• Belt Width: 300 to 4200mm
• Features: Heat Resistant
• Surface Treatment: PTFE Coated
• Tensile Strength: Upto 290 N/cm2

The Teflon coated conveyor belts are used in both large scale and medium scale industries for its features. The material is known for its non-wetting, anti-friction and nonbrittle in nature and can be used in different kinds of environment. The belt also contains electrical properties and known for its high thermal resistance in nature. The self-lubricant and flexible conveyor belts help people to use it for a longer span of time. Features - Self lubricant Flexible High thermal resistance Chemically inert

We are one of the leading manufacturers, exporters and suppliers of Belt Conveyor that are fabricated using high grade raw material and sophisticated technology.Cooling conveyor is in cooling food items such as biscuits, namkeen, etc.  Based on cutting-edge technology, our offered cooling conveyor is available in diverse sizes and specifications and comes with single or multiple tiers that turns to save space in factories.Client can purchase these at reasonable rate. Features Upgrade existing control with latest technology Suitable variety Expandable inputs & outputs * Durability

• Type: Conveyor System
• Driven Type: Chain Drive
• Material: Aluminium
• Color: Silver
• Capacity (kg per feet): 100 to 150 (kg/feet)
• Application: Industrial

Conveyor Type Fusing Machine, footwear machinery, hand Press Machine

Conveyor Shifter Machine, Puff Extruder Machine, Multihead Weightier Machine

Conveyor, Control Panel All types, Conveyor Belt, Electronic Equipment

Belt Conveyors System machine, HDPE Double Wall Electrical Corrugated Pipe

pu conveyor belt joining machine, pvc conveyor belt joining machine

Z conveyor Machine, Ffs Machine, Flow Wrap Pouch Packing Machine

Belt Conveyor System, bulk material handling system